Installation Guide

ENGLISH

INSTALLATION PROCEDURE

For Ceramic Tile:

• Drill 1/4” pilot holes a minimum of 1-1/4” deep at each marked location.

• Insert anchors until they are ﬂush with the face of the ﬁnished wall.

• Place the mounting bracket over the anchors, insert the screws and

tighten to secure them.

NOTE: If the wall stud is drilled, use a screw instead of an anchor for

mounting.

For Wooden Stud or Stringer:

• Drill 1/8” pilot holes.

• Place the mounting bracket, then insert the screw into the pilot hole and

tighten to secure it.

1. Place the product over the mounting bracket and tighten the set

screw(s) with the hex wrench.

Mounting

Bracket

Anchors

Screws

Towel Bar

Towel

Ring

Double

Robe Hook

Paper

Holder

Hex

Key