Instructions / Assembly

11 12
STEP 3 Camera body installation
Plug USB Cable into the back of
the camera and loop the cable
around the rings; continue
looping the cable if necessary.
Mount the camera to the back
plate and align the white dot to
the left of the screw where the
white arrow starts and rotate
camera counter-clockwise to lock.
Manage the cable with optional
Conduit. 1) Attach the Back Plate
Cover to the back plate if conduit
is not used. 2) Attach conduit
then the Conduit Cover on top.
Tighten the security screw with
hexagonal wrench. Do not
over-tighten the security screw.
Attach Visor to the top of the
camera lens.
Position camera and use
Cable Clips to manage the
cable if necessary.
1
4
2
5
6
3
4. Toucan Installation
After using the Leveler to adjust the balance
of the plate, you can use a pencil to mark the
placement for the screws.
Drill holes for screws placement.
Install Wall Inserts. Mount back plate with Washers and Screws.
1 2
3 4
OPTION 2 Mounting with screws
STEP 2 Mounting the camera’s back plate
Back Plate
Cover
Conduit
Cover
LOCK