QUICK SET-UP GUIDE CARAFE READY T526S
A. SET-UP NOTE: Bottled or filtered water is recommended. 1 Remove adhesive tapes. Unwrap the Power Cord. 2 Remove the Water Tank by tilting and lifting away from the Brewer. 3 Rinse the Water Tank several times. Fill with water. 4 Place the Water Tank and Lid back on to the Brewer.
WARNING: DO NOT pull the Latch while brewing. 5 Plug the Power Cord into an electrical outlet. Press the Power Button. 6 Place a large mug or cup on the Drip Tray. (min. 12oz) NOTE: The first brewing cycle may take up to 30 seconds to start. 7 Press on the 10 oz Cup Size Button to start brewing. 8 Discard the hot water and repeat steps 6 and 7 at least two (2) more times.
B-1. BREW WARNING: Sharp Needles on the Top Cover and in the Red Cup Holder. 9 Place a mug on the Drip Tray and lift the Cover by pulling on the Latch. 10 Insert a coffee pod into the Red Cup Holder. Close the Cover. 11 WARNING: Coffee Pod may be HOT. Press the desired Cup Size Button to start brewing. Enjoy your beverage! XBold CupTM for 8-14 oz Buttons. XLarge CupTM for 16-18 oz Buttons.
B-2. REFILL JUMBO CUP WARNING: Refill Jumbo Cup may be HOT. WARNING: DO NOT overpack with coffee. 9 Remove the Red Cup Holder and Drip Tray. 10 Fill the Refill Jumbo Cup with your own grind coffee up to the rim. 11 Insert the Jumbo Refill Cup into the Brewer. Place the Carafe. 12 Press the Carafe Button to start brewing.
For Household Use Only To learn more about Touch, visit www.touchbeverages.