SDS
Page 6
Safety Data
Sh
eet
according to 1907/2006/EC (REACH), 1272/2008/EC (CLP), and
GHS
Printing date 7/24/2013
Revision:
7/24/2013
Trade name:
Touch N Seal Foam Kit 200 ICC Part - B
(Contd. of page 5)
8 Exposure
controls/personal
protection
·
Additional information
about design of
technical facilities:
No further data; see item 7.
·
8.1 Control parameters
·
Ingredients
with limit values that require
monitoring
at the workplace:
811-97-2
Norflurane
W
EEL (USA)
1000 ppm
·
DNELs No further relevant
inform
ation
available.
·
PNECs No further relevant
inform
ation
available.
·
Additional information:
The lists valid during the
m
aking were used as basis.
·
8.2
Exposure
controls
· Personal
protective
equipment:
· General
protective
and
hygienic
measures: Keep away
from
foodstuffs,
beverages and feed.
Imm
ediately
rem
ove all soiled and
contaminated
clothing.
W
ash hands
before breaks and at the end of work.
Store
protective
clothing separately.
Do not inhale gases /
fum
es / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory
protection:
Use suitable
respiratory protective
device when high
concentrations
are present.
Use suitable
respiratory protective
device in case of
insufficient
ventilation.
·
Protection
of hands:
Protective gloves
The glove
m
aterial
has to be
impermeable
and
resistant
to the product/ the
substance/
the preparation.
Due to
m
issing tests no
rec
omm
endation
t
o the glove
m
aterial can be
give
n
f
or the product/ the
preparation/
the
chem
ical
m
ixture.
Selection of the glove
m
aterial on consideration of the penetration
tim
es, rates of diffusion and the
degradation.
·
M
aterial of gloves
T
he selection of the suitable gloves does not only depend on the
m
aterial, but also on further
m
arks of
qualit y and varies
f
rom
m
anuf
acturer to
m
anuf
acturer. As the product is a preparation of several
substances, the resistance of the glove
m
aterial can not be calculated in advance and has therefore to be
checked
prior to the application.
·
Penetration
time of glove material
The exact break through
tim
e has to be found out by the
m
anufacturer
of the
protective
gloves and has to
be observed.
· Eye protection:
Contact lenses should not be worn.
Safety
glasses
(Contd. on page 7)
37.0.1