T214B QUICK SET-UP GUIDE T214B T314B T414S T314B T414S
A. SET-UP NOTE: Bottled or filtered water is recommended. 1 Remove adhesive tapes. Unwrap the Power Cord. 2 Remove the Water Tank by tilting and lifting away from the Brewer. 3 Rinse the Water Tank several times. Fill with water. 4 Place the Water Tank and Lid back on to the Brewer.
WARNING: DO NOT pull the Latch while brewing. 5 Plug the Power Cord into an electrical outlet. Press the Power Button. 6 Place a large mug or cup on the Drip Tray. (min. 12oz) NOTE: The first brewing cycle may take up to 30 seconds to start. 7 Press on the 10 oz Cup Size Button to start brewing. 8 Discard the hot water and repeat steps 6 and 7 at least two (2) more times.
B. BREW WARNING: Sharp Needles on the Top Cover and in the Red Cup Holder. T214B 9 Place a mug on the Drip Tray and lift the Cover by pulling on the Latch. 10 Insert a coffee pod into the Red Cup Holder. Close the Cover. 11 WARNING: Coffee Pod may be HOT. T314B / T414S Press the desired Cup Size Button to start brewing. Enjoy your beverage! T314B / T414S ONLY: The default taste setting is BOLD, but this can be changed by pressing either MILD or MED.
