REAR VIEW QUICK SET-UP GUIDE PLUMBED READY T714C
A. SET-UP NOTE: Please consult a professional plumber if necessary. 1 Remove adhesive tapes. Unwrap the Power Cord. 2 View the rear of the product for connecting water supply line. 3 Insert a 1/4" diameter water supply line into the adapter on the rear of the Water Tank. 4 If the water supply line is not 1/4" diameter, an adapter may be needed.
WARNING: DO NOT pull the Latch while brewing. 5 Plug the Power Cord into an electrical outlet. Press the Power Button. 6 Place a large mug or cup on the Drip Tray. (min. 12oz) NOTE: The first brewing cycle may take up to 30 seconds to start. 7 Press on the 10 oz Cup Size Button to start brewing. 8 Discard the hot water and repeat steps 6 and 7 at least two (2) more times.
B. BREW WARNING: Sharp Needles on the Top Cover and in the Red Cup Holder. 9 Place a mug on the Drip Tray and lift the Cover by pulling on the Latch. 10 Insert a coffee pod into the Red Cup Holder. Close the Cover. 11 WARNING: Coffee Pod may be HOT. Press the desired Cup Size Button to start brewing. Enjoy your beverage! The default taste setting is BOLD, but this can be changed by pressing either MILD or MED.
