User's Manual
UP button Down button
Strap
Display Screen
Heart rate and SpO2 sensor
Heart rate and SpO2 LEDs Charging Interface
2 cm
Thank you for choosing Smart Watch TGW008 For your safety,
please read this user manual carefully before use. We recommend
that you keep this user manual properly for further reference.
When the battery remains less than 10%, your watch will vibrate
once and display the following prompt, touch "✓" to back to the
latest mode.
When the battery remains less than 5%, your watch will vibrate once
and display the following prompt , touch "✓" back to the latest mode.
a.Please connect charging cable to the watch as follow:
b. Use a regular USB charger with output voltage of 5.0V and output
current of 0.5A and above to connect your charging line.
• The screen will show below page while charging.
• The screen will show below page when it is fully charged.
The charger
Issue
description
Incorrect
step
counting
Abnormal waggling or
vibration of device
Wear the watch properly
to avoid abnormal
vibration
Possible cause
Walked less than 15
steps
Solution
Failed to
sync up
data with
App
Sliding or walking in
slippers
The mobile's Bluetooth
is off
Turn on your mobile's
Bluetooth
Restart the "TouchLink"
App
Out of Bluetooth signal
range
Keep your device close
to mobile device with
Bluetooth on
App is shut down or
crashed
Walk with normal
postureslippers
Walk more than 15 steps
continuously
No display
Connect to charger to
charge the Watch.
Low battery
Swipe down
-In the dial interface, swipe down to enter shortcut
menu.
- Change pages.
Long press
Click
-In the shutdown state, long press to turn on.
-In the boot state, long press to shutdown/restart.
-In sports mode, long press to end the sport.
-Long press for 3 seconds to force restart.
-When screen is shutdown，click the up button to
light up the screen.
-When the watch displays dial interface, click the
up button to enter the application list interface .
-When the watch displays a non-dial interface,
click the up button to return to the dial interface
(if there is a three-level interface, click the up
button toreturn to the previous menu, click again
to return to the dial interface).
-In sports mode, click the up button to pause.
Click
-When the screen is shut down, click down button
to light up the screen.
-When the watch displays dial interface, click the
down button to enter the sports interface.
Long press
In the main dial interface, long press to change the
dial.
click
Choose/Confirm.
Swipe left Switch card streams to heart rate and sleep, etc.
Swipe right
Swipe up
-Switch card streams to heart rate and sleep, etc.
- Return to the upper level interface.
- In the dial interface,swipe up to view messages.
-Change pages.
Down button:
Touch screen:
• Smart Watch TGW008(Built-in Polymer Lithium Battery)
• User Manual
• The Charger
Please make sure the Bluetooth of your mobile device is on, then
open the "TouchLink" App for device pairing.
A. Open "TouchLink" App, “Device → Add device → Smart Watch
TGW008 → scan code connection”scan the device QR code displayed
on watch to start pairing.
B. Open "TouchLink” App, “Device → Add device → Smart Watch
TGW008→search connection”scan for nearby devices, then choose
intended Bluetooth MAC address or device name. Click "✓" to pair-up
your phone and your watch. The watch will show "Whether to accept
binding?" Click "✓" to accept or "X" to refuse.
Keep the touch button facing the user, make sure the bottom sensor
is clung to the skin. Keep the wristband 2 cm or more from the wrist.
To view E label on your watch: Swipe up on dial interface --> click
Settings icon --> Regulatory Information.
Your Smart Watch TGW008 will turn on automatically while charging.
You can search & download "TouchLink" App from App Store / Google
Play to update your personal information (name, gender, height, age,
weight, etc.)
• Warning: Unauthorized disassembly/assembly of the
product is prohibited.
• About the accuracy of this product
• The accuracy of this product has been tested by our
quality control department. Its performance parameters
and sensors are based on the above-mentioned technical
standards and meet the delivery conditions.
Battery Capacity
Working
Temperature
Storage Environ
ment
200mAh
50℉ to 113℉(Fahrenheit)
Temperature:-4℉ to 140℉(Fahrenheit)
RelativeHumidity:≤90%RH
The new Smart Watch TGW008 can help you track activity data and
health status. It supports 24/7 daily activity monitoring: steps,
distance, consumed calories and dynamic heart rate. Users can
update their personal information such as gender, height, age,
weight, etc. From the "TouchLink" App. Data stored in the Smart
Watch can be synced to the “TouchLink” App and cloud
server through BLE 5.0.
.
• Bluetooth BLE5.0
• Full-screen touch
• 1.19 TFT display 390*390 pixel
• Daily Tracking: Steps / Calories / Sedentary
• Dynamic heart rate monitoring
• Breathing training
• Sleep monitoring report
• Call notification
• Find your phone
• Music control (iPhone support Apple music only)
• Camera control(Android only)
Product Name
Product Model
Screen
Resolution
Sensor
Frequency Range
Bluetooth Version
Bluetooth
Transmitting Power
Smart Watch
TGW008
1.19-inch AMOLED display
390 * 390 pixel
2402MHz-2480MHz
BLE5.0
< 1 dBm
Accelerometer, Heart rate and SpO2
sensor Capacitive touch sensor
•Do not put the product in the dishwasher, washing machine or dryer.
•Do not throw the product into fire, the battery may explode.
•Please use the USB port of the computer or mobile phone charger
correctly when charging.
• If the temperature of the product rises sharply during charging,
please stop charging
• The product is not a medical device and cannot be used to
diagnose, treat, cure or prevent any disease.
• Before starting or adjusting any exercise plan, please consult your
doctor.
• Some users may have skin irritation or allergies due to wearing
the product for too long. If you experience redness, swelling, itching,
or other allergies, please consult your doctor.
• Do not read the screen information while driving, distracted or
otherwise dangerous situations.
• This is not a toy. Do not let children or pets play with the product.
Small parts of the product may cause a choking hazard.
• Product functions may be affected by external factors such as
interference, and the data is for reference only.
• The product has a heart rate recording function. Wearing for a
long time may cause skin discomfort, allergies or risk of certain
diseases for some users.
If you have any of the following symptoms, please consult your
doctor before use or stop using the product:
-Epilepsy or sensitivity to light.
-Poor blood circulation or got bruises before; heart disease or other
diseases.
-Taking any medicine that is sensitive to light.
Warning: This Smart Watch TGW008 is not a medical device. The
Smart Watch TGW008 and its related Apps may not be used to
diagnose, treat, or prevent any disease or medical condition. Before
performing any exercise, sleep, or nutritional changes, be sure to seek
the advice of qualified medical professionals, otherwise serious injury
or death may result.
• Do not dispose of watch batteries in violation of local household
waste management regulations.
• Packaging recycling should comply with local regulations.
• Throwing the battery into a fire or a hot oven, or mechanically
breaking or cutting the battery may cause an explosion.
• Placing the battery in an extremely high temperature environment
may cause explosion or leakage of flammable liquid or gas.
• The battery is under extremely low pressure, which may cause
explosion or leakage of flammable liquid or gas.
According to the Management Measures for Low Power Radio Wave
Radiant Motors.
Article 12
• For certificated low-power radio frequency motors, neither the
company nor the user is allowed to change the frequency, increase
the power, or change the features and functions of the original design.
Article 14
• The use of low-power radio frequency motors must not affect
safety and interfere with legal communication. If interference is found,
it should be stopped immediately and improved to no interference
before continuing to use.
• Legal communication in the preceding paragraph refers to radio
communication operated in accordance with the provisions of the
Telecommunications Law.
• Low-power radio frequency motors must endure interference from
legal communications or industrial, scientific, and medical radio wave
radiation electrical equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
SAR tests are conducted using standard operating positions accepted
by the FCC with the device transmitting at its highest certified power
level in all tested frequency bands, although the SAR is determined
at the highest certified power level, the actual SAR level of the device
while operating can be well below the maximum value, in general,
the closer you are to a wireless base station antenna, the lower the
power output.
The electronic equipment contained in the product, if improperly
handled or disposed of, may damage the environment or cause
harm:
•Do not open the shell.
•Do not replace the built-in battery by yourself.
•Do not use corrosive cleaner to clean the product.
•Do not charge when the product is wet.
•If the product is not completely dry, do not charge.
•Do not expose the product to direct sunlight for a long time.
•Do not use the product in a sauna or steam room.
•Do not place the product in a non-working temperature
environment.
•If the screen or shell is damaged, do not use the product.
R- XXXXXXXX
IS 13253(PART 1)
IEC 60950-1
FCC ID:
2A2SG-TGW008
TouchGFX CO.,LTD
40A, Building H, Baoneng City (East Zone), No.3288,
Liuxian Road, Fuguang Community, Taoyuan Street,
Nanshan District, Shenzhen, China
Made in China
Input
5V 200mA