User's Manual

particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
Smart Watch
User Manual
封面
Thank you for choosing this product, please read the operating instructions carefully
before using the watch
Heart rate detector
Power button
Touch screen interface
charging contact point
I. Quick start
2. Appearance
1.Contents
Smart watch * 1 , Charging base * 1 , User manual * 1 , Warranty card * 1
3. Turning on/off
● Turning on
①
The watch automatically turns
on while charging.
Note: Please fully charge the watch
before first use. Use the provided
charger only
Press and hold the power button.
● Turning off
Turning off procedure: Settings>>Shutdown.
Charging the battery
4. Power button functions
5. On-screen operation
● Short press
● Press and hold
On the dial screen, short press the power button to enter the application list
In the application, short press the button to return to the previous menu
When the screen goes off, short press the power button to light up the screen
When the watch is off, press and hold the power button to turn it on
In the power-on state, long press the button to enter the shutdown prompt page
III. Functions
1. Sports activity tracking
XXXX has various sports modes. Tap the sports icon on the watch to enter the
corresponding sports mode. In the sports mode, the watch will record your exercise time,
distance, steps, heart rate, and other information to help you get the most from your workout.
2. Health monitoring
XXXX has various health monitoring functions such as heart rate monitoring, blood
oxygen monitoring and sleep monitoring.
Heart rate monitoring:
Slide the screen to the heart rate measurement interface and click
the heart rate icon in the watch to measure the heart rate. During measurement, please
keep relatively still so that the device can output heart rate data more accurately.
Blood oxygen monitoring: Low blood oxygen levels can affect your health. XXXX
provides you with the ability to monitor your blood oxygen, simply tap the blood oxygen
icon in your watch to automatically start the measurement.
Sleep monitoring:
A good nights sleep is very important for wellbeing. Deeprio Niagara can record
your sleep quality every night, including indicators such as deep sleep duration, light sleep
duration, and awake duration. Please note that this function needs to be manually enabled in the
XXXX app in order to be used.
Note: Heart rate, blood oxygen and sleep monitoring data are for reference only and should not
be used as a basis for medical diagnosis.
● Do not place the device or its accessories where the temperature is too high or too low,
as this may cause malfunction, fire, or explosion.
● Protect the product from impacts or vibrations that may damage the device or cause
malfunction.
● Do not disassemble or modify the device or its accessories without permission, and
call our after-sales support service in case of any malfunction.
V. FAQ
● The phone can't connect to the watch
1. Update the Deeprio app to the latest version.
2. Close all apps on the phone, restart the Bluetooth and try connecting again.
3. Verify that the operation system of the phone is Android 6.0 or iOS 9.0 or above.
● No message or call reminder received by the watch
1. Enable the smart reminder and incoming call reminder functions in the XXXX app and
synchronize the phone to the watch again.
2. Make sure the phone is successfully paired with the watch via bluetooth.
3. Ensure proper connection of the Bluetooth to the watch is maintained at all times.
● The Bluetooth connection fails frequently
1. If the watch and the phone are too far apart from each other the Bluetooth connection will be
lost, and if the distance is more than 7 meters, the Bluetooth connection will be compromised
significantly.
2. Obstruction between the watch and the phone will affect the connection,and the human
body or metal jewelry may interfere with the Bluetooth connection signals.
3. Please make sure that the Bluetooth function of your phone is normal and functional.
VI. Certification
FCC STATEMENT:
1.This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
封底
● Swipe up and down
Swipe up to see quick settings,
wi
pe down to see recent messages.
Review long text/detailed information
● Swipe left and right
Swipe left/right to cycle through the apps
and functions on the watch
● Single-tap on the screen
Enter the app/function displayed on-screen
Tap on-screen buttons within apps to perform
displayed actions
6. Change the wristband
● To remove a wristband:
1. Turn over the watch and find the quick-release lever.
2. While pressing the quick-release lever inward, gently pull the wristband away from the watch
to release it.
● To attach a wristband:
1. To attach a wristband, hold the band at a 45° angle to the watch, and slide the pin (the side
opposite the quick-release lever) into the notch on the watch.
2. While pressing the quick-release lever inward, slide the other end of the wristband into place.
3. When both ends of the pin are inserted, release the quick-release lever.
EN
3. Notification functions
XXXX can provide various notifications i.e. for messages, incoming calls, and alarms.
You can also set up sedentary reminders to remind you to move during the day. After you turn
on the corresponding reminder functions in the XXXX app, the watch will stay connected with
your phone and vibrate to remind you when there is an incoming call or a new message to
ensure you won't miss any important information.
4. Other functions
XXXX also offers features like weather reports, audio controls, stopwatch, flashlight,
find-my-phone service and much more - it is all waiting for you to explore and discover.
IV. Electrical parameters
Model TGW012
Input
Working
temperature range
0℃ ~ 45℃
Product name Smart Watch Screen
1.69'’
Colored screen
Battery capacity 230mAh
Battery life
7-9 days
Charging duration About 2 hours
Waterproof rating IP68
0 dBm
Bluetooth
transmit power
5V 200mA
TouchGFX CO.，LTD
40A, Building H, Baoneng City (East Zone), No.3288,Liuxian Road, Taoyuan
Street, Nanshan District,Shenzhen,Guangdong，China.
V1.0
②
①
②
③
①
②
①
②
①
①
②
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
RF warning statement:
7. E Label
About Procedure：
Settings>>About (Label).
II. Downloading and pairing
1. Download the app
Scan the QR code to download the Deeprio App or search
“XXXX” in the App store to download and install.
2. Pairing
Use the XXXX app on your phone to pair with your watch.