Owner's manual

Whisper Lift II

www.touchstonehomeproducts.com 800.215.1990

Installing TV on Lift

1. Using the internal wired control, move the lift to the up position. The UP button

is the button opposite of the cable side of the wired remote.

2. Hang TV on top crossbracket.

3 With TV hanging on top crossbracket, slightly raise the TV (a) and push it back toward the lift (b) so that the

bottom crossbracket is centered between the bottom set of hooks on the back of the TV mounting brackets.

4. Move the TV down slightly to fully attach TV to crossbrackets. The TV will hang on the top crossbracket and

the upper set of hooks on the bottom of the TV mounting brackets will lock the TV in place from moving while on

the lift.

**Please Note: The top of the TV should be lower than the roller assembly on top of the lift. The will insure that the roller is the first

thing to come in contact with the lid when the lift goes up.

DOWN