Operation Manual

Safety and Instruction Manual
7
Helpline: [phone]
• Avoid contact with moving
parts. Keep hands and utensils
out of blender jug while
blending to prevent personal
injury or damage to the blender.
• WARNING: The blade is sharp.
Handle with care.
• Never let the power unit, cord or
plug get wet.
• To reduce the risk of injury,
never place cutter-assembly
blades on base without blender
jug properly attached.
• Never exceed the maximum
capacity.
• Do not attempt to bypass the
interlock system that powers
the unit on.
• Always operate on a at
surface.
• Unplug the blender when not in
use, before taking off or putting
on parts and before cleaning.
• To prevent product overheating,
dry ingredients must not be
processed for more than 30
seconds at a time.
• IMPORTANT! In the base of
each blade’s collar, there is a
silicone gasket seal that creates
an airtight t with the jars. After
dish-washing and before each
use, always check to make
sure the mgasket is properly in
place as the heat from msome
dishwashers may cause the
gasket to become loose.
• WARNING: Do not operate the
motor continuously for more
than 60 seconds at a time.
Allow the motor to rest for 180
seconds before continuing.
• Warning: Do not use if the
blending cup is cracked or
broken. Do not operate the
Blender when the blending cup
is empty.
• Caution: Take care when
handling the six-blade lid
attachment, as the blades
may get hot during use. If
blending warm ingredients,
take care when removing the
blade assembly, as there may
be a pressure build-up from
blending, which could cause the
ingredients to eject from the lid
• The Product is NOT suitable for
blending soups or any other hot
liquids.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the service
department:
[phone]