Operation Manual

9
1. Check and ensure the heating elements are unfolded inside the cases.
2. Make sure the power cord is untangled and out of the pockets before plugging into the
mains.
3. There are 6 plate pockets. You may place up to 2 plates in each pocket to heat a total of
12 plates simultaneously.
4. Always have at least 1 plate in each pocket to avoid overheating.
5. Insert the plug into the mains outlet and turn on the switch.
6. It will take a few minutes before the TOWER plate warmer feels hot.
7. After 30 minutes, the TOWER Plate Warmer will have reached its maximum temperature
of 70°C.
8. Always use oven gloves to remove the plates from the heat pockets.
9. Always place the heated plates onto a heat resistant surface or place mat.
10. Allow your TOWER Plate Warmer to cool completely before storing after use.
Tips: Please note that smaller or thinner plates will heat faster than large thick plates.
5 - Using Your Appliance