T22003 Safety and Instruction Manual PLEASE READ CAREFULLY *Subject to registering Your Extended Guarantee online at www.towerhousewares.co.uk.
1912 Midland Metal Spinners was founded by George Cadman, who was then 65 years old, as a metal holloware manufacturing company, in St. Mark’s Street, Wolverhampton. They later moved into the Tower and Fort Works in Pelham Street, which ultimately gave rise to the famous Tower brand name. 1961 Tower became one of the largest manufacturers of aluminium holloware, electric kettles, tea pots and other household articles with over 1,000 employees. 1974 Russell Hobbs took ownership of the expanding Tower brand.
Safety and Instruction Manual CONTENTS: Please read this Manual carefully BEFORE using the Steam Iron for your own safety. Contents: 1. Thank you for purchasing this Tower 2000W Easy Glide Steam Iron from the Tower range of products. It has been designed to provide many years of trouble-free ironing. There are many benefits to using a Tower Iron: • Thermostatic control. • Non-stick sole plate. • Spray and steam functions. Specifications Components and structure Technical information 2.
1 SPECIFICATIONS: Components This box contains: Steam Iron Measuring jug 1 2 3 4 5 6 7 8 Structure of your appliance: 1. Spray nozzle 5. Spray button 2. Water filling opening 6. Temperature control 3. Steam control dial 7. Water tank 4. Steam button 8. Indicator light 4 Register online at www.towerhousewares.co.uk for your FREE extended guarantee.
Safety and Instruction Manual Technical Data Description: Model: Rated Voltage: Frequency: Power: Easy Glide Steam Iron T22003 220-240V ~50/60Hz 1850-2200W Documentation We declare that this product conforms to the following product legislation in accordance with the following directive(s): 2004/108/EC Electromagnetic Compatibility Directive. 2006/95/EC Low Voltage Directive. 2011/65/EU Restriction of Hazardous Substances Directive.
2 IMPORTANT SAFETY INFORMATION Please read these notes carefully BEFORE using your Tower appliance • Check that the voltage of the main circuit corresponds with the rating of the appliance before operating. • If the supply cord or appliance is damaged, stop using the appliance immediately and seek advice from the manufacturer, its service agent or a similarly qualified person. • Do not let the cord hang over the edge of a table or counter or let it come into contact with any hot surfaces.
Safety and Instruction Manual CAUTIONS • The iron should always be turned to “min” before plugging or unplugging from the mains outlet. Never pull the cord to disconnect from the mains: instead, grasp plug and pull to disconnect. • Always disconnect the iron from the electrical outlet when filling with water or emptying and when not in use. • Do not leave the iron unattended when connected to the mains or on an ironing board.
3 USING YOUR APPLIANCE Before First Use: 1. Remove your appliance from the packaging 2. Plug the appliance into the mains supply. 3. Your appliance is now ready for normal use. Filling With Water: 1. Remove the mains plug from the wall socket before filling (or emptying) the iron with water. 2. Set the steam control to the ‘0’ position. 3. Place the iron on the heel rest and tilt forward at an approximately 45° angle. 4. Pour water into the measuring jug.
Safety and Instruction Manual Using The Steam Jet: This function provides an extra amount of steam to remove stubborn creases. 1. Turn the temperature control to the position “MAX”. 2. The indicator light turns off when the required temperature is reached. 3. Press the steam jet button once. 4. Wait a few seconds before pressing the steam jet button again. 5. When there are stubborn creases usually all creases can be removed within three operations of the steam jet.
4 TROUBLE SHOOTING & FAQS Problem Possible Reasons Solution Not enough heat or too much heat The temperature dial may not have been rotated correctly, or it may have been set to the incorrect position. The iron is unplugged. Set the temperature dial to the correct position and check if the iron is plugged in. No steam or leakage. The temperature dial has been set to MIN Set the temperature dial to the required position.
Safety and Instruction Manual 5 CLEANING & CARE Self-Cleaning: 1. To use the self-clean function, turn the steam control dial to the solid dot. After Ironing: 1. Disconnect power supply and empty the water left in water tank. Reconnect the power supply and disconnect after indicator light goes off, this dries the soleplate. 2. Let the iron completely cool down, then wipe flakes and any other deposits on the soleplate with a damp cloth or a nonabrasive (liquid) cleaner.
6 RECYCLING DISPOSAL OF THE UNIT Appliances bearing the symbol shown here may not be disposed of in domestic rubbish. You are required to dispose of old electrical and electronic appliances like this separately. Please visit www.recycle-more.co.uk or www.recyclenow.co.uk for access to information about the recycling of electrical items. Please visit www.weeeireland.ie for access to information about the recycling of electrical items purchased in Ireland.
Safety and Instruction Manual 8 WARRANTY This product is guaranteed for 12 months from the date of original purchase. If any defect arises due to faulty materials of workmanship, the faulty products must be returned to the place of purchase. Refund or replacement is at the discretion of the retailer. We hope that you will enjoy your Tower Steam Iron Oven for many years. As a thank you for purchasing one of our fantastic products, we are giving you 3 years peace of mind.
9 YOUR RECEIPT Affix your store receipt to this page for safe keeping. 14 Register online at www.towerhousewares.co.uk for your FREE extended guarantee.
Safety and Instruction Manual NOTES Helpline: +44 (0) 333 220 6066 15
thank you! We hope you enjoy your appliance for many years. As a thank you for purchasing one of our fantastic products, we are giving you an extra 2 years peace of mind. *To receive your extra 2 years guarantee, register your appliance online by visiting: www.towerhousewares.co.uk Should you have a problem with your appliance, or need any spare parts, please call our Service Department on: +44 (0) 333 220 6066 Your warranty becomes void should you decide to use non Tower spare parts.
