Installation Instructions

TowerIQ, Inc | 1609 Park 370 Place, Hazelwood, MO 63042| 844‐626‐7638 | cs‐guardian@tower‐iq.com
16
These distances are general guidelines only. Refer to the applicable building and electrical codes in your area to determine specific local
requirements.
3.3 Interior Antenna Overview
You may use any combination of omnidirectional (dome) and/or directional (flat panel) interior antennas to obtain balanced signal
strength throughout the structure.
Dome antennas provide 360‐degree hemispherical coverage suitable for mostly square areas, while flat panel antennas providea focused
zone of coverage suitable for long narrow areas. The example above uses two dome antennas and one panel antenna to provide full
coverage
Keep in mind that floor structures in multistory buildings can cause significant signal loss, which means that you may need to install
interior antennas on more than one floor. Here is an example of a multistory installation:
Note: You may not need antennas on every floor of a multistory building, depending on factors such as building material, BDA gain, etc.