Installation Instructions

TowerIQ, Inc | 1609 Park 370 Place, Hazelwood, MO 63042| 844‐626‐7638 | cs‐guardian@tower‐iq.com

CAUTION: YOU ARE RESPONSIBLE FOR ENSURINGTHAT THE

INSTALLATION MEETS ALL APPLICABLE CODES.

3.5 BDA Location

Select an indoor location for the BDA that meets the following criteria:

• Indoor dry

• Ambient air temperature is 25°C

• Away from tightly enclosed or overly hot spaces

• Power and warning lights are easily visible

• Shortest possible cable runs to all antennas

3.6 Accessories

The final step in the planning process is to make sure you have all of the necessary accessories to complete the installation.You will need

all of the items listed in Chapter 1 of this manual plus some or all of the following:

• Cable clips: Use these to secure the cables to interior and exterior walls/ceilings.

• Appropriately rated sealant/caulking to waterproof exterior cable entry points

• Hand and/or power tools as needed to complete the installation

• Personal Equipment (PPE): Use all PPE required by local codes and/or best practices to help ensure personal safety duringinstallation.

Note: You may need to obtain a permit from your local building department to install the BDA and antennas. Check your local building

and/or electrical codes.

3.7 Need Help?

If you need help planning your installation, contact a qualified installer, the reseller who supplied you with the BDA, or TowerIQ:

Call: 844‐626‐7638, 7 a.m. to 5 p.m. PST, Monday – Friday

Email: cs‐guardian@tower‐iq.com