Installation Instructions

TowerIQ, Inc | 1609 Park 370 Place, Hazelwood, MO 63042| 844‐626‐7638 | cs‐guardian@tower‐iq.com

Note: To avoid install glitches, we recommend you close all other Windows programs running on your computer before

proceeding.

7.1 Sentry Software Introduction

TowerIQ’s Sentry is a revolutionary advancement in signal‐booster management. It aids in the installation, optimization, and ongoing

management of your GuardianB BDA. It provides installers with tools for seamless system configurations, and it helps pinpoint

malfunctions due to unforeseen changes in the amplifier landscape, such as new towers or repeater systems. Sentry also notifies installers

or end users about various parameters via email. Features include:

• Quick notification about booster changes and over‐power situations.

• Allows offsite monitoring related to booster performance, such as uplink, downlink or bands.

• Helps optimize installations by monitoring and identifying the strongest signal strength available.

7.2 Software Installation

To install and configure the server, follow these steps:

• Get the TowerIQ Sentry software from your device supplier, or download the Windows software here:

https://toweriq.nyc/products/guardian‐series

• Install the software using the steps outlined below.

• Configure the server to a static IP or public IP address.

• In order to function on the network correctly, the server and the device must be (a) on the same Local Area Network, or (b) the

server must be the front end to the device.

• Use appropriate security software for safe and reliable operation when connected to a network.

• All device and user information will be stored on the computer.

Double‐click ClientUserSetup to start the installation, which takes you to Welcome screen.

After you have shut down other programs, click Next, which will take you to the User Information screen shown below. This iswhere

you’ll enter user information. It may be you as the installer, or you may be setting this up for someone else who will be monitoring the

system on an ongoing basis.