Installation Instructions

TowerIQ, Inc | 1609 Park 370 Place, Hazelwood, MO 63042| 844‐626‐7638 |
cs‐guardian@tower‐iq.com
29
7.6 Device Registration
Connect the device to the networked client computer with a USB cable as described in the previous section. Make sure the server is also
linked to the computer. Select a serial port and click Open, as shown in the Add Booster screen below.
Complete device registration as described below:
• Click Refresh to query device parameters
• Enter a name in the Booster Name field
• Enter the location in the Location Address field (optional)
• Click Add to register the device on the server
• Keep in mind that only the registered user is authorized to
see/operate the added device.
7.5 Device Configuration
Using the same screen as before, configure the device according to the steps below.
• Select a serial port and click Open.
• Click Refresh to query device parameters.
• Click on the drop‐down menu and select a server IP address and port number to make sure the device can be connected to the
server.
• Dynamic IP is available by checking Auto Search IP function, OR…enter
IP parameters manually, if the device needs a static IP.
• Click Apply to finish the configuration.
Modify Booster Information
. To modify the booster information, right click to access a pop‐up menu with the following additional
options. Select Edit Booster Info to proceed.
Delete Booster
. To delete a booster, right click on the summary screen again to access a pop‐up menu with additional options, and then
select Delete Booster.
You will see a confirmation screen as shown below. Click Yes to proceed.