Installation Instructions

TowerIQ, Inc | 1609 Park 370 Place, Hazelwood, MO 63042| 844‐626‐7638 |
cs‐guardian@tower‐iq.com
32
RF State
• PS700 and PS800 share the same uplink RF link. Setting the
Uplink attenuation on this page between 1 and 25 will
simultaneously set the equivalent value for all uplink
channels for both PS700 and PS800.
• PS700 downlink Attenuation is used to attenuate the
downlink gain for 700MHz band. Inputting any value
between 1 and 25 will set the equivalent value for all
downlink channels in this band.
• PS800 downlink Attenuation is used to attenuate the
downlink gain for the 800MHz band. Inputting any value
between 1 and 25 will set the equivalent value for all
downlink channels in this band.
Once updates are complete on this screen, click the
Se
t
button
to apply changes.
The button of “Power supply” is a reserved function for the
future.
From the dashboard above you can manually adjust the attenuation dB to resolve problems. You can also turn off individual bands.