User Manual

Townsend Labs Sphere L22 Precision Microphone System Guide Sphere Plug-ins
30
Swap
This parameter lets you flip the right and left input channels. If the mic outputs were connected back-
wards, this corrects the wiring without repatching.
Auto Cal
This lets you automatically calibrate the input levels. This is achieved by adjusting the rear trim control
to compensate for gain differences between the front and rear channels. When using Auto Cal, you
must input the same signal to both the front and back mic preamp channels, which is accomplished
by enabling the CAL switch on the Sphere mic body. See Preamp Calibration on page 14 for more infor-
mation.
Keyboard and Mouse Shortcuts
The following shortcuts can make using the Sphere plug-ins more efficient.
• Double-click a parameter to reset its default value.
Mac
• Option + click a parameter to reset to its default value.
• Command + drag a control for finer adjustment.
Windows
• Alt + click a parameter to reset to its default value.
• Ctrl + Drag a control for finer adjustment.