Product Card

TSB-190327-0366 2
Definitions
 Credential: The lock requires a valid credential to operate. A credential can be a Master Code, User Code, or
Keycard/Fob.
 LED Indicator: The LED indicators are located around the keypad of the lock. Lock flashes
green LED and/or red
LED dependent on inputs. While unlocking, a red LED followed by a green LED means the lock is not programmed
and can be unlocked with any 6-10 digit Code or Keycard/Fobs.
 Master Code: The Master Code programs all User Codes, Keycards/Fobs (Credentials), and System Settings. The
Factory Default Settings Master Code is 123456. This must be changed before programming the lock. Each lock has
one Master Code. Master Code cannot be deleted.
 User Code: User Codes are used to operate the lock. User Codes are programmed by the Master Code. The lock
can have a maximum of 447 User Codes (interchangeable with Keycards/Fobs).
 User Keycard/Fob: Keycards or Fobs can be used to operate the lock. Master Code is used to program User
Keycards/Fobs. Swipe the touch keypad with a Keycard/Fob to operate the lock. The lock can have a maximum of
447 Keycards/Fobs (interchangeable with User Codes). Any standard Keycard/Fob can be programmed into the
lock.
 Dual Verification Mode: Two valid credentials are needed to unlock the door.
 Sound: Keypad sound is enabled by Factory Default Settings. Disabling the sound only affects general operation,
not during programming of the lock. During programming mode, lock will temporarily re-enable sound.