Product Card

9
Revert to Factory Default Settings w/o Master code
I
Steps required to revert lock to factory default settings:
1. Unscrew the back cover.
2. Locate the reset button on the battery holder.
3. Press and hold the reset button, after approximately 4
seconds the lock will beep 2 times, release the reset
button. The green LED indicator will light up and it will
beep once indicating lock is reset.
Result: Lock is reverted to factory default settings.
All codes are deleted and Master Code changes to 123456.
Low Battery Warning
When the battery voltage is low, unlocking the lock will activate a sound indicator as well as a yellow LED followed by a
red LED to indicate low power. Batteries should be changed as soon as this happens.
When locking under low battery voltage condition, the lock will only use the warning sound to indicate low power.
Only 200 operations are allowed under low battery condition- must change batteries to ensure lock operates properly.
The product is powered by 4*AA batteries, Extreme Temperature: 60 degree max.