User's Manual

13
REMOVABLE BLADE GUARDS • REMOVABLE BLADE GUARDS • REMOVABLE BLADE GUARDS •
REMOVABLE BLADE GUARDS • REMOVABLE BLADE GUARDS • REMOVABLE BLADE GUARDS •
REMOVABLE BLADE GUARDS • REMOVABLE BLADE GUARDS
GB
FR
DE
ES
IT
PT
PL
NL
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
The blade guards are great for beginners and can be removed for experienced pilots.
1. Turn the drone over. Using a micro Phillips Head screwdriver, remove the 3
screws from the motor cover and set aside.
2. Remove the 2 screws inside the motor housing that hold the blade guard in place.
3. Pull the blade guard off the motor housing. Reassemble the motor cover and
tighten the 3 screws back in place. Complete these steps for all blade guards.
1
2