TUNDRA 2 0 1 2 CUSTOMER EXPERIENCE CENTER 1-800-331-4331 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A.
TABLE OF CONTENTS LIMITATIONS OF THE QUICK REFERENCE GUIDE 1 BASIC OPERATION 2 DESTINATION INPUT By Address Note on Voice Recognition Tips for Using Voice Recognition By Address - Voice Recognition 3 3 5 5 5 DESTINATION INPUT - POINT OF INTEREST (POI) Point of Interest by Name Point of Interest by Category Point of Interest by Category - Voice Recognition 7 7 8 9 SET HOME 10 CONNECT A BLUETOOTH PHONE 12 CALLING BY VOICE RECOGNITION Dial by Number Dial by Name 13 13 14 ADDITIONAL NAVIGATION FEA
BASIC OPERATION 9 . PWR VOL 1 TUNE-FILE FM SEEK TRACK AM 8 MAP VOICE SAT 2 DEST DISC AUX SETUP 3 AUDIO INFO PHONE LOAD . CLOSE MA WMA WM TOYOTA DISP 7 4 6 5 £ MAP/VOICE Button Repeat the last voice guidance prompt, cancel the map scrolling feature, or display the current position. Ó DESTINATION Button Input the destination by one of several methods. Î SETUP Button Adjust Preferences for: General Settings, Clock, Voice, Navigation, Phone, Audio, and Vehicle Maintenance.
DESTINATION INPUT BY ADDRESS step 1 Press DEST by . on the faceplate followed step 2 Touch and move to step 4. To change Search Area, touch and move to step 3. step 3 Select the desired Search Area and . touch step 4 Input the city name and touch step 5 Touch the desired city name. step 6 Input the street name and touch . Quick Tip - Enter the street name without prefixes such as North or the letter N.
DESTINATION INPUT BY ADDRESS step 7 Touch the desired street name. step 9 Touch step 11 Touch guidance. . step 8 step 10 Input the house number and touch . Select the desired Route Preferences by touching followed by . Touch to confirm selection.
DESTINATION INPUT NOTE ON VOICE RECOGNITION The navigation system's voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every street and city. TIPS FOR USING VOICE RECOGNITION tip 1 A large TALK icon will appear on the NAV screen to signal when to speak your command.
DESTINATION INPUT BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the beep say, “Enter” to confirm destination. step 7 Touch to start route guidance.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY NAME step 1 Press DEST on the faceplate followed by . step 3 Input the POI name and touch . step 2 step 4 Touch . Use or to scroll up or down. Touch the desired destination. Quick Tip - If the POI isn’t listed in the database verify the spelling and Search Area for accuracy. step 5 Touch . Quick Tip - Touching next to the POI name will display the address and telephone number.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press DEST on the faceplate followed by . step 2 step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 step 6 Touch . See page 15 to select desired Route Preference. Touch to start route guidance. Use or to scroll up or down. Touch the desired point of interest. Touch .
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press on the steering wheel. After the beep say, “Destination.” step 2 After the beep say, “Point of Interest.” Quick Tip - If you know your next command, you can press at any time to interrupt the prompt. Speak your command after the beep. step 3 After the beep say, “Near Here.” step 4 After the beep say, “Hotels.
SET HOME step 1 Press by step 3 Touch SETUP on the faceplate followed . . step 2 Touch . step 4 Touch . step 6 Input the city name and touch Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch . .
SET HOME step 7 Touch the desired city name. step 8 Input the street name and touch . Quick Tip - Enter the street name without prefixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. step 9 step 11 Touch the desired street name. Touch icon. 11 followed by to change the home step 10 Input the house number and touch . step 12 Touch the desired icon for your home.
CONNECT A BLUETOOTH PHONE If you have difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen. step step INFO 1 Press 3 Input the passkey listed on the screen into the approved Bluetooth cell phone.
CALLING BY VOICE RECOGNITION DIAL BY NUMBER step 1 Press on the steering wheel. After the beep say, “Phone.” step 2 After the beep say, “Dial by Number.” step 4 After the beep, say “Dial” or press on the steering wheel. Quick Tip - If you know your next command, you can press at any time to interrupt the prompt. Speak your command after the beep. step 3 After the beep say the phone number digits individually, without pausing (e.g. “Three, one, zero, four…”).
CALLING BY VOICE RECOGNITION DIAL BY NAME If you have difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen. step 1 Press on the steering wheel. After the beep say, “Phone.” step 2 After the beep say, “Dial by Name.
ADDITIONAL NAVIGATION FEATURES SEARCH AREA Prior to inputting the desired address select the Search Area by pressing . If the incorrect Search Area is chosen, the system will either find an address that closely matches in that area or will indicate that the address cannot be found. Select the desired Search Area and touch ROUTE PREFERENCES 3 ROUTES Once the address has been inputted, select the desired route preference(s) for the trip. When the yellow bar appears, the preference has been selected.
ADDITIONAL NAVIGATION FEATURES BEEP SETTING PRESS SETUP > VOICE VOLUME PRESS SETUP > Adjust the Beep sound On or Off. Adjust the Voice Guidance volume level. LANGUAGE CLOCK SETTINGS PRESS SETUP > PRESS SETUP > Select Language Preference: English, French or Spanish. Adjust the Time Zone and Daylight Saving Time option.
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME † PRESS > SETUP > > The system can be customized to match your driving habits. Adjust the speed settings for Residential, Main Streets and Freeways to match your normal driving speed. Adjusting these settings will affect the estimated time of arrival (ETA). † Please refer to the Navigation Owner's manual for a complete description of this feature. The system does not account for traffic signals or traffic flow.
NAVTRAFFIC NavTraffic integrates with your navigation system to display continuously updated traffic information for 100 markets. New TUNDRA owners with factory-installed navigation receive a 90-day complimentary trial subscription to NavTraffic from SiriusXM. For more information, see www.siriusxm.com/navtraffic Route guidance with flow information and traffic events. Traffic events - road construction. Accidents and disabled vehicles.
NAVTRAFFIC NAVTRAFFIC PREFERENCES SHOW NAVTRAFFIC INFORMATION step 1 Press by MAP VOICE on the faceplate followed . step 2 . When the Touch yellow bar appears, the preference has been selected. Touch , traffic flow is displayed by colored lines alongside freeway or highways: Free flow traffic Moderate traffic Heavy congestion step 2 Touch AUTO AVOID TRAFFIC step 1 step 3 19 Press by SETUP on the faceplate followed . Select from the Auto Avoid Traffic option. Touch followed by .
NAVTRAFFIC NAVTRAFFIC PREFERENCES TRAFFIC VOICE GUIDANCE step 1 Press by SETUP on the faceplate followed . step 2 step 2 Touch to display Traffic Voice Guidance option on page 2. Select to receive voice notification of traffic events within 20 miles along the current route. Touch followed by . SHOW FREE FLOWING TRAFFIC step 1 step 3 Press by SETUP on the faceplate followed . Touch . Select from the Show Free Flowing Traffic option. Touch followed by .
VOICE COMMANDS on the steering wheel to activate the voice recognition feature. After Press and release the beep, say one of the voice commands shown on the screen or listed below. Please refer to the Navigation Owner’s Manual for additional information.
VOICE COMMANDS NAVIGATION MODE POI (POI must be entered via the destination screen, see page 9.) Attractions Attractions Bowling Centers Entertainment Golf Courses Health & Fitness Clubs Horse Racing Parks & Beaches Marinas Motor Sports Nightlife Performing Arts Ski Resorts Sports Complexes Sports & Fitness Automotive Automobile Clubs Auto Service & Maint.