QUICK GUIDE 11 2 BASIC FUNCTION 31 3 AUDIO SYSTEM 65 4 VOICE COMMAND SYSTEM 123 5 INFORMATION 133 6 PERIPHERAL MONITORING SYSTEM 139 7 PHONE 151 8 NAVIGATION SYSTEM 191 9 Entune App Suite 259 INDEX 275 About the following equipment, see the “Owner’s Manual”. Fuel consumption Vehicle customization settings 1 RAV4_Navi+MM_OM42A18U_(U) 14.04.
Introduction NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL This manual explains the operation of this system. Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times. The screen shots in this document and the actual screens of this system differ depending on whether the functions and/or a contract existed and the map data available at the time of producing this document.
IMPORTANT INFORMATION ABOUT THIS MANUAL For safety reasons, this manual indicates items requiring particular attention with the following marks. CAUTION ● This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others. NOTICE ● This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored.
HOW TO READ THIS MANUAL No. Name Description Operational Outlines An outline of the operation is explained. Main Operations The steps of an operation are explained. Related Operations A main operation’s supplementary operations are described. Information Useful information for the user is described. 4 RAV4_Navi+MM_OM42A18U_(U) 14.04.
SAFETY INSTRUCTION (WITHOUT NAVIGATION FUNCTION) To use this system in the safest possible manner, follow all the safety tips shown below. Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations. Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it.
CAUTION ● For safety, the driver should not operate the system while he/she is driving. Insufficient attention to the road and traffic may cause an accident. ● While driving, be sure to obey the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
TABLE OF CONTENTS 1 QUICK GUIDE 1. BASIC FUNCTION........................... 12 2 BASIC FUNCTION OVERVIEW BUTTONS ......................... 12 1. BASIC INFORMATION BEFORE OPERATION.................................. 32 “Apps” SCREEN .................................... 14 INITIAL SCREEN ................................... 32 HOME SCREEN .................................... 16 TOUCH SCREEN GESTURES.............. 34 2. QUICK REFERENCE....................... 20 TOUCH SCREEN OPERATION ............
3 AUDIO SYSTEM 5 1 INFORMATION 1. BASIC OPERATION........................ 66 1. USEFUL INFORMATION .............. 134 QUICK REFERENCE ............................ 66 RECEIVING WEATHER INFORMATION ................................. 134 SOME BASICS...................................... 68 2. RADIO OPERATION ....................... 73 RECEIVING TRAFFIC MAP INFORMATION ................................. 136 AM/FM RADIO....................................... 73 DATA SERVICES SETTINGS .............
TABLE OF CONTENTS 8 NAVIGATION SYSTEM 1. BASIC OPERATION...................... 192 QUICK REFERENCE .......................... 192 9 Entune App Suite 1. Entune App Suite OVERVIEW.................................. 260 MAP SCREEN OPERATION ............... 195 Entune App Suite SERVICE................. 260 MAP SCREEN INFORMATION ........... 201 2. Entune App Suite OPERATION................................ 265 TRAFFIC INFORMATION.................... 205 2. DESTINATION SEARCH...............
1 1 QUICK GUIDE 2 1 BASIC FUNCTION 3 1. OVERVIEW BUTTONS .................. 12 4 2. “Apps” SCREEN ........................... 14 3. HOME SCREEN ............................. 16 5 STATUS DISPLAY................................. 18 2 6 QUICK REFERENCE 1. “Setup” SCREEN .......................... 20 3 7 NAVIGATION OPERATION 8 1. REGISTERING HOME ................... 22 2. REGISTERING PRESET DESTINATIONS ........................... 24 3. OPERATION FLOW: GUIDING THE ROUTE................. 26 4.
1. BASIC FUNCTION 1. OVERVIEW BUTTONS Without navigation function With navigation function 12 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC FUNCTION No. Function Page Press to eject a disc. 1 70 QUICK GUIDE By touching the screen with your finger, you can control the selected functions. 34, 35 Insert a disc into this slot. The CD player turns on immediately. 70 Press to access the Bluetooth® hands-free system. 152 Turn the “TUNE SCROLL” knob to select a radio station or skip to the next or previous track/file.
1. BASIC FUNCTION 2. “Apps” SCREEN Press the “APPS” button to display the “Apps” screen. 14 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC FUNCTION No. * Function Page 192 Select to display the audio control screen. 66 Select to display the hands-free operation screen. 152 Select to display the “Message Inbox” screen. 166 Select to display weather information. 134 1 QUICK GUIDE Select to display the map screen. Select to reorder the applications. 267 Select the desired application then * or to reorder. Select to display traffic information. 136, 205 Select to display the “Setup” screen.
1. BASIC FUNCTION 3. HOME SCREEN Press the “HOME” button to display the home screen. The home screen can display multiple information screens, such as the audio system screen, hands-free screen and navigation screen, simultaneously. When hands-free mode is selected, it is possible to make a call on the home screen if the desired phone number is registered to one of the 4 displayed buttons.
1. BASIC FUNCTION Two-way split screen 1 QUICK GUIDE No. Function Page Displays the condition of the Bluetooth® connection 18 Select to display the “Setup” screen. 20 17 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC FUNCTION STATUS DISPLAY The condition of the Bluetooth® connection, as well as the level of reception and the amount of cellular phone battery charge left, are displayed on the status display. No. Indicators Conditions (Gray) No connection The condition of the Bluetooth® connection The level of reception Poor (Blue) Good An antenna for the Bluetooth® connection is built into the instrument panel.
1. BASIC FUNCTION No. Indicators Conditions The amount of battery charge left Empty Full The amount displayed does not always correspond with the amount displayed on the Bluetooth® device. The amount of battery charge left may not be displayed depending on the type of the Bluetooth® device connected. This system does not have a charging function. 1 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. QUICK REFERENCE 1. “Setup” SCREEN The items shown on the “Setup” screen can be set. Press the “APPS” button, then select “Setup” to display the “Setup” screen. 20 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. QUICK REFERENCE No. Page Select to change the selected language, operation sound, automatic screen change settings, etc. 53 Select to customize the home screen. 36 Select to set the voice settings. 59 Select to adjust the contrast and brightness of the screens. 40 Select to set memory points (home, preset destinations, address book entries, areas to avoid), navigation details or to delete previous destinations. 235, 244 Select to set audio settings.
3. NAVIGATION OPERATION 1. REGISTERING HOME* 1 2 3 Press the “APPS” button. 4 Select “Go Home”. 5 Select “Yes”. 6 There are different kinds of methods to search for your home. (P.208) Select “Navigation”. Select “Dest.”. *: With navigation function 22 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. NAVIGATION OPERATION Select “Enter”. 8 Select “OK”. 1 QUICK GUIDE 7 Registration of home is complete. Registering home in a different way P.236 Editing the name, location, phone number and icon P.236 Setting home as the destination P.211 23 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. NAVIGATION OPERATION 2. REGISTERING PRESET DESTINATIONS* 1 Press the “APPS” button. 2 Select “Navigation”. 3 4 Select one of the preset destination buttons. 5 Select “Yes”. 6 There are different kinds of methods to search for a destination. (P.208) Select “Dest.”. *: With navigation function 24 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. NAVIGATION OPERATION Select “Enter”. 8 Select a position for this preset destination. 9 Select “OK”. 1 QUICK GUIDE 7 Registration of preset destinations is complete. Registering preset destinations in a different way P.237 Editing the name, location, phone number and icon P.238 Setting preset destinations as the destination P.211 25 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. NAVIGATION OPERATION 3. OPERATION FLOW: GUIDING THE ROUTE* 1 2 Press the “APPS” button. Select “Navigation”. 5 Select “Go”. 6 Select “OK”. Selecting routes other than the one recommended. (P.220) Guidance to the destination is displayed on the screen and can be heard via voice guidance. 3 Select “Dest.”. 4 There are different kinds of methods to search for a destination. (P.208) *: With navigation function 26 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. NAVIGATION OPERATION 4. SETTING HOME AS THE DESTINATION* 1 Press the “APPS” button. 5 Guidance to the destination is displayed on the screen and can be heard via voice guidance. 2 Select “Navigation”. 3 Select “Dest.”. 4 Select “Go Home”. *: With navigation function 27 RAV4_Navi+MM_OM42A18U_(U) 14.04.22 12:48 1 QUICK GUIDE Select “OK”. Selecting routes other than the one recommended. (P.
4. FUNCTION INDEX 1.
4. FUNCTION INDEX Useful functions 1 Information Page QUICK GUIDE Displaying vehicle maintenance* 61 Hands-free system (for cellular phone) Registering/connecting Bluetooth® phone ® Making a call on a Bluetooth phone ® Receiving a call on the Bluetooth phone Voice command system Operating the system with your voice Peripheral monitoring system Viewing behind the rear of the vehicle Page 42 156 162 Page 124 Page 139 *: With navigation function 29 RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
2 1 BASIC FUNCTION 2 1 BASIC INFORMATION BEFORE OPERATION 2 Bluetooth® SETTINGS 3 1. INITIAL SCREEN ........................... 32 1. REGISTERING/CONNECTING Bluetooth® DEVICE ................... 42 2. TOUCH SCREEN GESTURES ...... 34 REGISTERING A Bluetooth® PHONE FOR THE FIRST TIME........................ 42 REGISTERING A Bluetooth® AUDIO PLAYER FOR THE FIRST TIME......... 43 3. TOUCH SCREEN OPERATION ................................ 35 4 5 PROFILES ............................................
1. BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN 1 When the engine switch is in the “ACC” or “ON” position, the initial screen will be displayed and the system will begin operating. (Vehicles without a smart key system) When the engine switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed and the system will begin operating.
1. BASIC INFORMATION BEFORE OPERATION RESTARTING THE SYSTEM When system response is extremely slow, the system can be restarted. 1 2 BASIC FUNCTION Press and hold the “PWR VOL” knob for 3 seconds or more. 33 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC INFORMATION BEFORE OPERATION 2. TOUCH SCREEN GESTURES Operations are performed by touching the touch screen directly with your finger. Operation method Outline Main use Touch Quickly touch and release once. Changing and selecting various settings Drag*1 Touch the screen with your finger, and move the screen to the desired position. Scrolling the lists Scrolling the map screen*2 Flick*1 Quickly move the screen by flicking with your finger.
1. BASIC INFORMATION BEFORE OPERATION 3. TOUCH SCREEN OPERATION This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.) NOTICE ● To prevent damaging the screen, lightly touch the screen buttons with your finger. ● Do not use objects other than your finger to touch the screen. ● Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.
1. BASIC INFORMATION BEFORE OPERATION 4. HOME SCREEN OPERATION The home screen can display multiple information screens, such as the audio system screen and hands-free screen, simultaneously. 1 2 Press the “HOME” button. “Home” screen is displayed. When a screen is selected, the selected screen will change to a full-screen display. CUSTOMIZING THE HOME SCREEN The display items/area on the home screen can be changed. 1 Select 2 Select “Home Screen”. . Select “Two Panel” or “Three Panel”.
1. BASIC INFORMATION BEFORE OPERATION 5. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION When searching by an address, name, etc., or entering data, letters and numbers can be entered via the screen. LIST SCREEN The list screen may be displayed after entering characters. ENTERING LETTERS AND NUMBERS 1 No. Function Select to enter desired characters. Text field. Entered character(s) will be displayed.
1. BASIC INFORMATION BEFORE OPERATION ■SELECTING ALL ITEMS Some lists contain “Select All”. If “Select All” is selected, it is possible to select all items. 1 LIST SCREEN OPERATION When a list is displayed, use the appropriate screen button to scroll through the list. Select “Select All”. “Unselect All”: Unselect all items in the list. Icon Function Select to skip to the next or previous page. Select and hold or to scroll through the displayed list. This indicates the screen’s position.
1. BASIC INFORMATION BEFORE OPERATION SORTING 1 Select “Sort”. Some lists contain character screen buttons, “ABC”, “DEF” etc., which allow a direct jump to list entries that begin with the same letter as the character screen button. 1 2 Select the desired character jump buttons. Select the desired sorting criteria. INFORMATION ● Every time the same character screen button is selected, the list starting with the subsequent character is displayed. 39 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC INFORMATION BEFORE OPERATION 6. SCREEN ADJUSTMENT The contrast and brightness of the screen display and the image of the camera display can be adjusted. The screen can also be changed to either day or night mode. 1 Press the “APPS” button. INFORMATION ● When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses.
1. BASIC INFORMATION BEFORE OPERATION ADJUSTING THE CONTRAST/ BRIGHTNESS The contrast and brightness of the screen can be adjusted according to the brightness of your surroundings. BASIC FUNCTION 1 2 2 Select “General” or “Camera”. Select the desired item. General Camera Screen button Function “Brightness” “+” Select to brighten the screen. “Brightness” “-” Select to darken the screen. “Contrast” “+” Select to strengthen the contrast of the screen.
2. Bluetooth® SETTINGS 1. REGISTERING/CONNECTING Bluetooth® DEVICE REGISTERING A Bluetooth® PHONE FOR THE FIRST TIME 5 To use the hands-free system, it is necessary to register a Bluetooth® phone with the system. When this screen is displayed, search for the device name displayed on this screen on the screen of your Bluetooth® device. Once the phone has been registered, it is possible to use the hands-free system. This operation cannot be performed while driving.
2. Bluetooth® SETTINGS 7 Check that the screen is displayed when registration is complete. The system waits for connection requests coming from the registered device. At this stage, the Bluetooth® functions are not yet available. Turn the Bluetooth® connection setting of your audio player on. This function is not available when the Bluetooth® connection setting of your audio player is set to off. 2 Press the “AUDIO” button. 3 Select “Source” on the audio screen or press “AUDIO” button again.
2. Bluetooth® SETTINGS PROFILES This system supports the following services. Bluetooth® Device Bluetooth® Phone/ Bluetooth® Audio Player Spec. Function Profile HFP (Hands-Free Profile) a Bluetooth® device Function Hands-free system OPP (Object Push Profile) Bluetooth® Audio Player Recommendations Ver. 2.0 Ver. 3.0 +EDR Requirements Recommendations Ver. 1.0 Ver. 1.6 Ver. 1.1 Ver. 1.2 Ver. 1.0 Ver. 1.
2. Bluetooth® SETTINGS 2. SETTING Bluetooth® DETAILS 1 Press the “APPS” button. “Bluetooth* Setup” SCREEN 2 Select “Setup”. 3 4 Select “Bluetooth*”. Function Registering a Bluetooth device 46 Bluetooth® 47 Deleting a Select the desired item to be set. Page ® device Connecting a Bluetooth® device 48 Editing the Bluetooth® device information 50 Bluetooth® system settings 51 *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 45 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. Bluetooth® SETTINGS DISPLAYING THE “Bluetooth* Setup” SCREEN IN A DIFFERENT WAY From the screen 1 2 3 4 phone/message settings Press the “APPS” button. Select “Setup”. Select “Phone”. Select “Connect Phone”. From the status display 1 Select status display area on the screen. REGISTERING A Bluetooth® DEVICE Up to 5 Bluetooth® devices can be registered. Bluetooth® compatible phones (HFP) and audio players (AVP) can be registered simultaneously. This operation cannot be performed while driving.
2. Bluetooth® SETTINGS 4 Register the Bluetooth® device using your Bluetooth® device. A PIN-code is not required for SSP (Secure Simple Pairing) compatible Bluetooth® devices. Depending on the type of Bluetooth® device being connected, a message confirming registration may be displayed on the Bluetooth® device’s screen. Respond and operate the Bluetooth® device according to the confirmation message. 5 Check that the screen is displayed when registration is complete.
2. Bluetooth® SETTINGS CONNECTING A Bluetooth® DEVICE Up to 5 Bluetooth® devices (Phones (HFP) and audio players (AVP)) can be registered. ® If more than 1 Bluetooth device has been registered, select which device to connect to. 1 2 Display the “Bluetooth* Setup” screen. (P.45) Select the device to be connected. 3 Select the desired connection. When another Bluetooth® device is connected To disconnect the Bluetooth® device, select “Yes”.
2. Bluetooth® SETTINGS ■AUTO CONNECTION MODE Vehicles without a smart key system When the engine switch is in the “ACC” or “ON” position, the system searches for a nearby registered device. The system will connect with the registered device that was last connected, if it is nearby. Vehicles with a smart key system When the engine switch is in ACCESSORY or IGNITION ON mode, the system searches for a nearby registered device.
2. Bluetooth® SETTINGS EDITING THE Bluetooth® DEVICE INFORMATION The Bluetooth® device’s information can be displayed on the screen. The displayed information can be edited. No. Information The name of the Bluetooth® device. Can be changed to a desired name. (P.51) Select to set the Bluetooth® audio player connection method. (P.51) 1 Display the “Bluetooth* Setup” screen. (P.45) Device address is unique to the device and cannot be changed. 2 3 Select the desired device to be edited.
2. Bluetooth® SETTINGS CHANGING A DEVICE NAME 1 2 Select “Device Name”. Enter the name and select “OK”. ● Even if the device name is changed, the name registered in your Bluetooth® device does not change. The Bluetooth® settings can be confirmed and changed. 1 Display the “Bluetooth* Setup” screen. (P.45) 2 3 Select “System Settings”. Select the desired item to be set. SETTING AUDIO PLAYER CONNECTION METHOD 1 Select “Connect From”. 2 Select the desired connection method.
2. Bluetooth® SETTINGS No. Information Bluetooth® Select to set connection on/off. CHANGING “Bluetooth* Power” Page 52 Displays system name. Can be changed to a desired name. 52 PIN-code used when the Bluetooth® device was registered. Can be changed to a desired code. 52 Device address is unique to the device and cannot be changed. Select to set the phone connection status display on/off. Select to set the connection status display of the audio player on/off.
3. OTHER SETTINGS 1. GENERAL SETTINGS Settings are available for system time, operation sounds, etc. 1 GENERAL SETTINGS SCREEN Press the “APPS” button. 2 BASIC FUNCTION 2 3 4 Select “Setup”. Select “General”. Select the items to be set. 53 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. OTHER SETTINGS No. Function Select to change the time zone and set the daylight saving time on/off. (P.55) No. Function Select to set the animations on/off. Select to customize the startup image. (P.56) Select to change the language. * Select to change the unit of measure for distance. Select to change the unit of temperature. Select to set the sound beeps on/off. Select to change the screen button color. Select to change the keyboard layout.
3. OTHER SETTINGS SYSTEM TIME SETTINGS Used for changing time zones and the on/off settings of daylight saving time. Display the “General Settings” screen. (P.53) 2 3 Select “System Time”. 1 2 Select “Time Zone”. Select the desired time zone. 2 BASIC FUNCTION 1 ■SETTING THE TIME ZONE Select the items to be set. No. Function Select to change the time zone. (P.55) Select to set daylight saving time on/ off. 4 Select “OK”. 55 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. OTHER SETTINGS CUSTOMIZING THE STARTUP AND SCREEN OFF IMAGES ■TRANSFERRING IMAGES 1 An image can be copied from a USB memory and used as the startup and screen off images. Open the cover and connect a USB memory. Vehicles without a smart key system When the engine switch is in the “ACC” or “ON” position, the initial screen will be displayed. (P.32) Vehicles with a smart key system When the engine switch is in ACCESSORY or IGNITION ON mode, the initial screen will be displayed. (P.
3. OTHER SETTINGS INFORMATION 1 Display the “General Settings” screen. (P.53) 2 3 Select “Customize Startup Image”. 2 Select the desired image. BASIC FUNCTION ● When saving the images to a USB, name the folder that the startup image is saved to “StartupImage” and name the folder that the screen off image is saved to “DisplayOffImage”. If these folder names are not used, the system cannot download the images. (The folder names are case sensitive.) ● The compatible file extensions are JPG and JPEG.
3. OTHER SETTINGS ■DELETING TRANSFERRED IMAG- DELETING PERSONAL DATA ES 1 Display the “General Settings” screen. (P.53) 2 Select “Customize Startup Image” or “Customize Screen Off Image”. 3 4 1 Display the “General Settings” screen. (P.53) 2 3 Select “Delete Personal Data”. 4 Select “Yes” when the confirmation screen appears. Select “Delete”. Select “Delete All”. Select “Yes”. Registered or changed personal settings will be deleted or returned to their default conditions.
3. OTHER SETTINGS 2. VOICE SETTINGS Voice volume, etc. can be set. 1 VOICE SETTINGS SCREEN Press the “APPS” button. 2 BASIC FUNCTION 2 3 4 Select “Setup”. Select “Voice”. Select the items to be set. INFORMATION ● “Voice Settings” screen can also be displayed from the voice recognition top screen. (P.126) No. Function Select to adjust the volume of voice guidance. * Select to set the voice guidance during route guidance on/off. Select to set the voice recognition prompts.
3. OTHER SETTINGS 3. DRIVER SETTINGS The driver settings feature will allow the system to link some preferences (such as audio presets, button colors, language, etc.) to a paired Bluetooth® phone. 1 Press the “APPS” button. 2 3 4 Select “Setup”. Select “Driver”. MANUALLY SELECT LINKED SETTINGS 1 Display the driver settings screen. (P.60) 2 Select “Manually Select Linked Settings”. 3 Select the desired phone. After a few seconds, loaded screen automatically switches to the home screen.
3. OTHER SETTINGS 4. MAINTENANCE* When this system is turned on, the “Maintenance Reminder” screen displays when it is time to replace a part or certain components. (P.32) 1 Press the “APPS” button. No. Function Select to set the condition of parts or components. Select to add new information items separately from provided ones. Select to reset the item which have expired conditions. Select to call the registered dealer. Select to register/edit dealer information. (P.62) 2 3 Select “Maintenance”.
3. OTHER SETTINGS MAINTENANCE INFORMATION SETTING 1 Select the desired part or component screen button. When the vehicle needs to be serviced, the screen button color will change to orange. 2 Set the conditions. No. Function Select to enter the next maintenance date. DEALER SETTING Dealer information can be registered in the system. With dealer information registered, route guidance to the dealer is available. 1 2 Select “Set Dealer”. Select the desired item to search for the location. (P.
3. OTHER SETTINGS 3 ■EDITING DEALER OR CONTACT Select the items to be edited. NAME 1 2 Select “Edit” next to “Dealer” or “Contact”. Enter the name and select “OK”. Function Page Select to enter the name of a dealer. 63 Select to enter the name of a dealer member. 63 Select to set the location. 63 Select to enter the phone number. 63 Select to delete the dealer information displayed on the screen. Select to set the displayed dealer as a destination.
3 AUDIO SYSTEM 1 BASIC OPERATION 1. QUICK REFERENCE ..................... 66 2. SOME BASICS............................... 68 TURNING THE SYSTEM ON AND OFF ...................................... 68 SELECTING AN AUDIO SOURCE........ 69 DISC SLOT ............................................ 70 USB/AUX PORT .................................... 70 SOUND SETTINGS ............................... 71 VOICE COMMAND SYSTEM ................ 72 2 RADIO OPERATION 1. AM/FM RADIO...............................
3 1 AUDIO SYSTEM 2 3 MEDIA OPERATION 1. CD .................................................. 90 4 AUDIO REMOTE CONTROLS 3 1. STEERING SWITCHES............... 108 4 OVERVIEW ........................................... 90 PLAYING AN AUDIO CD ...................... 92 PLAYING AN MP3/WMA/AAC DISC.................................................... 92 5 SETUP 5 1. AUDIO SETTINGS ...................... 111 AUDIO SETTINGS SCREEN............... 111 2. USB MEMORY...............................
1. BASIC OPERATION 1. QUICK REFERENCE Press the “AUDIO” button to display the audio screen. Without navigation function With navigation function 66 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC OPERATION Function Using the radio Page 73, 83, 89 Playing an audio CD or MP3/WMA/AAC disc 90 Playing a USB memory 93 Playing an iPod® 97 ® 101 Using the AUX port 106 Using the steering wheel audio switches 108 Audio system settings 111 3 AUDIO SYSTEM Playing a Bluetooth device INFORMATION ● The display and button positions will differ depending on the type of the system. 67 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC OPERATION 2. SOME BASICS This section describes some of the basic features of the audio system. Some information may not pertain to your system. Vehicles without a smart key system Your audio system works when the engine switch is turned to the “ACC” or “ON” position. Vehicles with a smart key system NOTICE ● To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running.
1. BASIC OPERATION REORDERING THE AUDIO SOURCE SELECTING AN AUDIO SOURCE 1 Press the “AUDIO” button. 1 Display the “Select Audio Source” screen. (P.69) 2 Select “Reorder”. 3 AUDIO SYSTEM 2 Select “Source” on the audio screen or press “AUDIO” button again. 3 Select the desired source. 3 Select the desired audio source then or 4 to reorder. Select “OK”. INFORMATION ● Dimmed screen buttons cannot be operated. ● When there are two pages, select or to change the page.
1. BASIC OPERATION DISC SLOT USB/AUX PORT INSERTING A DISC 1 1 Open the cover and connect a device. Insert a disc into the disc slot. Turn on the power of the device if it is not turned on. After insertion, the disc is automatically loaded. EJECTING A DISC 1 Press the disc. button and remove the INFORMATION ● If a USB hub is plugged-in, two devices can be connected at a time.
1. BASIC OPERATION SOUND SETTINGS TONE AND BALANCE TONE: AUTOMATIC SOUND LEVELIZER (ASL) 1 BALANCE: Display the “Audio Settings” screen. (P.111) Type A 2 3 Select “Automatic Sound Levelizer”. Select “High”, “Mid”, “Low”, or “Off”. Type B 2 A good balance of the left and right stereo channels and of the front and rear sound levels is also important.
1. BASIC OPERATION 1 Select “Sound” on the audio control screen. 2 Select the desired screen button. No. VOICE COMMAND SYSTEM 1 Press this switch to operate the voice command system. Function Select “+” or “-” to adjust highpitched tones. Select “+” or “-” to adjust midpitched tones. The voice command system and its list of commands can be operated. (P.124) Select “+” or “-” to adjust lowpitched tones. Select to adjust the sound balance between the front and rear speakers.
2. RADIO OPERATION 1. AM/FM RADIO OVERVIEW Select “AM” or “FM” on the “Select Audio Source” screen. (P.69) ■CONTROL SCREEN Without navigation function 3 Top screen AUDIO SYSTEM Option screen 73 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. RADIO OPERATION With navigation function Top screen Option screen ■CONTROL PANEL 74 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. RADIO OPERATION No. Function Select to scroll the page of preset buttons. Select to display the option screen. Select to display the audio source selection screen. 3 Select to display the sound setting screen. AUDIO SYSTEM Select to display a list of receivable stations/channels. Select to scan for receivable stations/channels. Select to store information of the audio currently being broadcast on the radio. Select to tune to preset stations/channels. Select to display the additional text information.
2. RADIO OPERATION PRESETTING A STATION Radio mode has a mix preset function, which can store up to 36 stations (6 stations per page x 6 pages) from any of the AM, FM or SAT bands. 1 2 Tune in the desired station. SELECTING A STATION FROM THE LIST A station list can be displayed. 1 2 Select “Station List”. 3 Select the desired station and select “OK”. FM radio only: Select the desired program genre. Select “(add new)”.
2. RADIO OPERATION ■REFRESHING THE STATION LIST 1 Select “Refresh” on the station list screen and the following screen will be displayed. CACHING A RADIO PROGRAM* A radio program can be cached and played back in a time-shifted manner. 3 PLAYING BACK THE CACHE MANUALLY “Cancel Refresh”: Select to cancel the refresh. “Source”: Select to change to another audio source while refreshing. 1 Display the cache radio operation buttons. (P.73) 2 Select the desired cache radio operation button.
2. RADIO OPERATION AUTOMATIC PLAYBACK OF THE CACHE If the radio broadcast is interrupted by another audio output, such as an incoming phone call, the system will automatically cache the interrupted portion and perform time-shift playback when the interruption ends. To manually operate the cache operation: (P.77) INFORMATION ● The system can store up to 20 minutes. Cached data will be erased when the radio mode or station is changed or when the audio system is turned off.
2. RADIO OPERATION TRAFFIC ANNOUNCEMENT (FM RADIO) A station that regularly broadcasts traffic information is automatically located. 1 2 Select “Station List”. INFORMATION ● If a traffic program station is found, the name of the traffic program station will be displayed for a while. HD Radio™ Technology is the digital evolution of analog AM/FM radio.
2. RADIO OPERATION AVAILABLE HD Radio™ TECHNOLOGY MULTICAST On the FM radio frequency most digital stations have “multiple” or supplemental programs on one FM station. 1 2 PRESERVING A MUSIC INFORMATION Tag information in the music broadcasting is preserved in the system and transmits to an iPod. 1 Select “Tag” to bookmark the music information. 2 Connect an iPod. (P.70) Select the “HD)” logo. Select the desired channel.
2. RADIO OPERATION INFORMATION ● The tag information can not be preserved while scanning or caching the radio station. ● If tagging the music information fails, “Saving the HD Radio tag was unsuccessful.” will be displayed on the screen. If this occurs, tag the information again. ● HD Radio™ stations can be preset. ● An orange “HD)” logo indicator will be displayed on the screen when in digital.
2. RADIO OPERATION TROUBLESHOOTING GUIDE Experience Cause Action Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip. The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode. None, radio broadcast issue. A user can contact the radio station. Sound fades, blending in and out. Radio is shifting between analog and digital audio. Reception issue, may clear-up as the vehicle continues to be driven.
2. RADIO OPERATION 2. XM Satellite Radio* OVERVIEW Select “XM” on the “Select Audio Source” screen. (P.69) ■CONTROL SCREEN 3 AUDIO SYSTEM ■CONTROL PANEL *: With navigation function 83 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. RADIO OPERATION No. Function Select to scroll the page of preset buttons. Select to display the option screen. Select to scan for receivable channels. Select “Additional Information” to display the information. Select to display the audio source selection screen. Select to display the sound setting screen. Select to display a list of receivable channels. Select to tune to preset channels. Turn to step up/down channels. Turn to move up/down the list.
2. RADIO OPERATION HOW TO SUBSCRIBE TO AN XM Satellite Radio To listen to a satellite radio broadcast in the vehicle, a subscription to the XM Satellite Radio service is necessary. HOW TO SUBSCRIBE It is necessary to enter into a separate service agreement with XM Satellite Radio in order to receive satellite broadcast programming in the vehicle. Additional activation and service subscription fees apply that are not included in the purchase price of the vehicle and digital satellite tuner.
2. RADIO OPERATION INFORMATION ● XM Radio ServicesDescriptions • Radio and Entertainment XM offers more than 170 satellite radio channels of commercial-free music and premier sports, news, talk, and entertainment. XM is broadcast via satellites to millions of listeners across the continental United States. XM subscribers listen to XM on satellite radio receivers for the car, home, and portable use. More information about XM is available online at www.siriusxm.com (U.S.A.) or www.xmradio.ca (Canada).
2. RADIO OPERATION DISPLAYING THE RADIO ID Each XM tuner is identified with a unique radio ID. The radio ID is required when activating an XM service or when reporting a problem. 1 2 3 Select “Channel List”. Select the desired program genre. Select the desired channel and select “OK”. PRESETTING A CHANNEL 1 2 Tune in the desired channel. Select “(add new)”. To change the preset channel to a different one, select and hold the preset station/ channel. 3 Select “Yes” on the confirmation screen.
2. RADIO OPERATION IF THE SATELLITE RADIO TUNER MALFUNCTIONS When problems occur with the XM tuner, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. Message Explanation The XM antenna is not connected. Check whether the XM antenna cable is attached securely. “Check Antenna” A short circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer for assistance.
2. RADIO OPERATION 3. INTERNET RADIO* LISTENING TO INTERNET RADIO One of Entune App Suite features is the ability to listen to internet radio. In order to use this service, a compatible phone and the system needs to be set up. For details: P.265 Select the internet radio application. ● Other applications can be activated while listening to internet radio. ● If an iPhone is connected via Bluetooth® and USB at the same time, system operation may become unstable.
3. MEDIA OPERATION 1. CD OVERVIEW The CD operation screen can be reached by the following methods: Insert a disc. (P.70) Select “CD” on the “Select Audio Source” screen. (P.69) ■CONTROL SCREEN ■CONTROL PANEL 90 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION No. Function Displays cover art Select to display a track/file list. Select to display the audio source selection screen. Select to display the sound setting screen. 3 Select to play/pause. AUDIO SYSTEM Shows progress Select to set repeat playback. Select to set random playback. Audio CD: Select to display a track list. MP3/WMA/AAC disc: Select to display a folder list. To return to the top screen, select “Now Playing” on the list screen.
3. MEDIA OPERATION PLAYING AN AUDIO CD PLAYING AN MP3/WMA/AAC DISC REPEATING The track currently being listened to can be repeated. 1 Select the repeat button to change on/ off. REPEATING The file currently being listened to can be repeated. 1 Select the repeat button to change on/ off. RANDOM ORDER Tracks can be automatically and randomly selected. 1 Select the random button to change on/off. RANDOM ORDER Files can be automatically and randomly selected.
3. MEDIA OPERATION 2. USB MEMORY OVERVIEW The USB memory operation screen can be reached by the following methods: Connect a USB memory. (P.70) Select “USB (DEVICE NAME)” on the “Select Audio Source” screen. (P.69) 3 ■CONTROL SCREEN AUDIO SYSTEM ■CONTROL PANEL 93 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION No. Function Select to display the audio source selection screen. Select to display the sound setting screen. Select to play/pause. Shows progress Select to set repeat playback. Select to set random playback. Select to display the play mode selection screen. To return to the top screen, select “Now Playing” on the list screen. Displays cover art Select to display file/track list. Turn to select a file/track. Turn to move up/down the list.
3. MEDIA OPERATION CAUTION ● Do not operate the player’s controls or connect the USB memory while driving. NOTICE INFORMATION ● If tag information exists, the file names will be changed to track names. 95 RAV4_Navi+MM_OM42A18U_(U) 14.04.22 12:48 3 AUDIO SYSTEM ● Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player.
3. MEDIA OPERATION PLAYING A USB AUDIO REPEATING The file/track currently being listened to can be repeated. 1 Select the repeat button to change on/ off. RANDOM ORDER Files/tracks can be automatically and randomly selected. 1 Select the random button to change on/off. 96 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION 3. iPod OVERVIEW The iPod operation screen can be reached by the following methods: Connect an iPod. (P.70) Select “iPod (DEVICE NAME)” on the “Select Audio Source” screen. (P.69) When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen. (P.100) 3 AUDIO SYSTEM ■CONTROL SCREEN 97 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION ■CONTROL PANEL No. Function Displays cover art Select to display a track list. Select to display the audio source selection screen. Select to display the sound setting screen. Select to play/pause. Shows progress Select to set repeat playback. Select to set random playback. Select to display the play mode selection screen. To return to the top screen, select “Now Playing” on the list screen. Turn to select a track. Turn to move up/down the list.
3. MEDIA OPERATION No. Function Turn to adjust volume. Press to turn the audio system on/off. Press and hold to restart the audio system. *: Without navigation function CAUTION 3 NOTICE ● Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player. ● Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal.
3. MEDIA OPERATION iPod AUDIO REPEATING The track currently being listened to can be repeated. 1 Select the repeat button to change on/ off. iPod VIDEO To change to iPod video mode, select “Browse” on the iPod audio screen, then select the “Videos” tab and select the desired video file. The system can only output the iPod video sound. RANDOM ORDER Tracks can be automatically and randomly selected. 1 Select the shuffle button to change on/ off. 100 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION 4. Bluetooth® AUDIO The Bluetooth® audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth®, the Bluetooth® audio system will not function. 3 OVERVIEW Audio” on the “Select Audio Source” screen. (P.
3. MEDIA OPERATION ■CONTROL PANEL 102 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION No. Function Select to display the audio source selection screen. Displays Bluetooth® device condition. Select to display the sound settings screen. 3 Select to play/pause. AUDIO SYSTEM Shows progress Select to set repeat playback. Select to set random playback. Select to display the playlist screen. To return to the top screen, select “Now Playing” on the list screen. Select to display the portable device connection screen. Displays cover art Select to display a track list.
3. MEDIA OPERATION CAUTION ● Do not operate the player’s controls or connect to the Bluetooth® audio system while driving. ● Your audio unit is fitted with Bluetooth® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices.
3. MEDIA OPERATION CONNECTING A Bluetooth® DEVICE LISTENING TO Bluetooth® AUDIO To use the Bluetooth® audio system, it is necessary to register a Bluetooth® device with the system. Registering an additional device Select “Select Device” on the The track currently being listened to can be repeated. 1 Bluetooth® audio control screen. 2 For more information: P.46 RANDOM ORDER Selecting a registered device 1 Select “Select Device” on Bluetooth® audio control screen.
3. MEDIA OPERATION 5. AUX OVERVIEW Select “AUX” on the “Select Audio Source” screen. (P.69) ■CONTROL SCREEN ■CONTROL PANEL 106 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. MEDIA OPERATION No. Function Select to display the audio source selection screen. Select to display the sound setting screen. * Press to turn mute on/off. 3 Press to select an audio mode. AUDIO SYSTEM Turn to adjust volume. Press to turn the audio system on/off. Press and hold to restart the audio system. *: Without navigation function CAUTION ● Do not connect portable audio device or operate the controls while driving. NOTICE ● Do not leave portable audio device in the vehicle.
4. AUDIO REMOTE CONTROLS 1. STEERING SWITCHES Some parts of the audio system can be adjusted using the switches on the steering wheel. No.
4.
4. AUDIO REMOTE CONTROLS “MODE/HOLD” switch Mode Operation Function AM, FM, XM, AUX Press Change audio modes Press and hold Mute (Press and hold again to resume the sound.) Audio CD/ MP3/WMA/ AAC disc, USB, iPod, BT audio, APPS Press Change audio modes Press and hold Pause (Press and hold again to resume the playmode.) INFORMATION ● In the APPS mode, some operation may be done on the screen depend on the selected APPS. 110 RAV4_Navi+MM_OM42A18U_(U) 14.04.
5. SETUP 1. AUDIO SETTINGS Detailed audio settings can be programmed. 1 AUDIO SETTINGS SCREEN Press the “APPS” button. 3 2 3 4 Select “Setup”. Select “Audio”. Select the items to be set. * Function Page Select to change the number of preset radio stations/channels displayed on the screen. 112 Select to set cover art settings on/off. Select to set automatic sound levelizer. 71 Select to enable cache radio. Select to reset all setup items.
5. SETUP SETTING THE NUMBER OF RADIO PRESETS 1 Display the “Audio Settings” screen. (P.111) 2 3 Select “Number of Radio Presets”. Select the button with the desired number to be displayed. 112 RAV4_Navi+MM_OM42A18U_(U) 14.04.
6. TIPS FOR OPERATING THE AUDIO SYSTEM 1. OPERATING INFORMATION NOTICE ● To avoid damage to the audio system: • Be careful not to spill beverages over the audio system. • Do not put anything other than an appropriate disc into the disc slot. RADIO Usually, a problem with radio reception does not mean there is a problem with the radio — it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception.
6. TIPS FOR OPERATING THE AUDIO SYSTEM XM Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM Satellite Radio. Alternation or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment. CD PLAYER AND DISC This CD player is intended for use with 4.7 in. (12 cm). discs only. Extremely high temperatures can keep the CD player from working.
6. TIPS FOR OPERATING THE AUDIO SYSTEM Special shaped discs ● Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations. The use of such discs may damage the player, or it may be impossible to eject the disc. ● This system is not designed for use of Dual Discs. Do not use Dual Discs because they may cause damage to the player. ● Do not use discs with a protection ring.
6. TIPS FOR OPERATING THE AUDIO SYSTEM iPod To clean a disc: Wipe it with a soft, lintfree cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint-free cloth. Do not use a conventional record cleaner or anti-static device. CD-R/RW DISCS CD-R/CD-RW discs that have not been subject to the “finalizing process” (a process that allows discs to be played on a conventional CD player) cannot be played.
6. TIPS FOR OPERATING THE AUDIO SYSTEM COMPATIBLE MODELS The following iPod®, iPod nano®, iPod classic®, iPod touch® and iPhone® devices can be used with this system.
6. TIPS FOR OPERATING THE AUDIO SYSTEM ■CORRESPONDING SAMPLING FREQUENCY File type Frequency (kHz) MP3 files: MPEG 1 LAYER 3 32/44.1/48 MP3 files: MPEG 2 LSF LAYER 3 16/22.05/24 WMA files: Ver. 7, 8, 9 (9.1/9.2) 32/44.1/48 AAC files: MPEG4/AAC-LC 11.025/12/16/ 22.05/24/32/ 44.1/48 ■CORRESPONDING BIT RATES File type Bit rate (kbps) MP3 files: MPEG 1 LAYER 3 32 - 320 MP3 files: MPEG 2 LSF LAYER 3 8 - 160 WMA files: Ver. 7, 8 CBR 48 - 192 WMA files: Ver. 9 (9.1/9.
6. TIPS FOR OPERATING THE AUDIO SYSTEM 001.mp3 002.wma Folder 1 003.mp3 Folder 2 004.mp3 005.wma Folder 3 006.m4a 3 The play order of the compact disc with the structure shown above is as follows: 001.mp3 002.wma . . . 006.m4a The order changes depending on the personal computer and MP3/WMA/AAC encoding software you use. 119 RAV4_Navi+MM_OM42A18U_(U) 14.04.22 12:48 AUDIO SYSTEM The player is compatible with VBR (Variable Bit Rate).
6. TIPS FOR OPERATING THE AUDIO SYSTEM TERMS PACKET WRITE This is a general term that describes the process of writing data on-demand to CDR, etc., in the same way that data is written to floppy or hard discs. ID3 TAG This is a method of embedding trackrelated information in an MP3 file. This embedded information can include the track number, track title, the artist’s name, the album title, the music genre, the year of production, comments, cover art and other data.
6. TIPS FOR OPERATING THE AUDIO SYSTEM ERROR MESSAGES Mode USB iPod Explanation “No music files found.” This indicates that no MP3/WMA/AAC files are included in the disc. “Check disc” It indicates that the disc is dirty, damaged, or it was inserted upside down. Clean the disc or insert it correctly. It indicates a disc which is not playable is inserted. “DISC Error” There is a trouble inside the system. Eject the disc. “Connection error.
6. TIPS FOR OPERATING THE AUDIO SYSTEM 122 RAV4_Navi+MM_OM42A18U_(U) 14.04.
4 1 VOICE COMMAND SYSTEM 2 VOICE COMMAND SYSTEM OPERATION 3 1. VOICE COMMAND SYSTEM...... 124 4 1 USING THE VOICE COMMAND SYSTEM............................................ 124 VOICE COMMAND SYSTEM OPERATION ..................................... 125 2. CASUAL SPEECH RECOGNIZATION..................... 130 3. COMMAND LIST ......................... 131 5 6 7 8 9 123 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. VOICE COMMAND SYSTEM OPERATION 1. VOICE COMMAND SYSTEM The voice command system enables the audio, hands-free systems, etc. to be operated using voice commands. MICROPHONE Refer to the command list for samples of voice commands. (P.131) USING THE VOICE COMMAND SYSTEM STEERING SWITCH It is unnecessary to speak directly into the microphone when giving a command. Talk switch Press the talk switch to start the voice command system. To cancel voice recognition, press and hold the talk switch.
1. VOICE COMMAND SYSTEM OPERATION INFORMATION The voice command system is operated by selecting a tab corresponding to each function. The tabs are found on the upper part of the screen. 1 Press the talk switch. Voice guidance for the voice command system can be skipped by pressing the talk switch. 2 Say the tab selection command or select the desired tab. Commands related with each function are displayed on the screen of the each function tab.
1. VOICE COMMAND SYSTEM OPERATION 3 Say the command displayed on the screen. Registered POIs, registered names in the contacts list etc., can be said in the place of the “<>” next to the commands. (P.131) For example: Say “Find nearby dining”, “Call John smith” etc. If a desired outcome is not shown, or if no selections are available, perform one of the following to return to the previous screen: • Say “Go back”. • Select “Go Back”.
1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: PERFORMING A DESTINATION SEARCH BY ADDRESS (ENGLISH ONLY)* 1 2 3 ● The voice command recognition is designed to recognize the main body of the official street name. Say “Enter an address”. For example: if the official street name is “East Main Street”, the voice command recognition will recognize “Main”. Say “” continuously. For example: Say “West 555”. Press the talk switch.
1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: SEARCH FOR A SONG 1 2 Press the talk switch. Say “Play song ”. A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say “” or select the number. The system starts playing music and the song lists are displayed. VOICE COMMAND EXAMPLE: CALL NAME 1 2 Press the talk switch. Say “Call types>”.
1. VOICE COMMAND SYSTEM OPERATION VOICE COMMAND EXAMPLE: DIAL NUMBER 1 2 Press the talk switch. Say the phone number. In the same manner as it is displayed on the screen, “Dial ”, after saying “Dial a number” say the phone number. Say the phone number one digit at a time.
1. VOICE COMMAND SYSTEM OPERATION 2. CASUAL SPEECH RECOGNIZATION Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the procedure and directly state the desired operation. Not all voice commands are displayed in the function menu.
1. VOICE COMMAND SYSTEM OPERATION 3. COMMAND LIST Recognizable voice commands and their actions are shown below. Frequently used commands are listed in the following tables. For devices that are not installed in the vehicle, the related commands will not be displayed in the screen. Also, according to conditions, other commands may not be displayed in the screen. The functions available may vary according to the system installed. Voice recognition language can be changed. (P.
1.
5 1 INFORMATION 2 1 USEFUL INFORMATION 3 1. RECEIVING WEATHER INFORMATION ......................... 134 4 DISPLAYING WEATHER INFORMATION ................................. 134 5 2. RECEIVING TRAFFIC MAP INFORMATION ......................... 136 DISPLAYING TRAFFIC MAP INFORMATION ................................. 136 6 3. DATA SERVICES SETTINGS................................. 137 7 SETTING DOWNLOAD METHODS ........................................ 137 8 9 133 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. USEFUL INFORMATION 1. RECEIVING WEATHER INFORMATION Without navigation function Weather information can be received via the HD Radio. 3 Check that the “Weather” screen is displayed. With navigation function Weather information can be received via the HD Radio or by the Entune App Suite application on a Bluetooth® phone. For details about the Entune App Suite application: P.263 No. DISPLAYING WEATHER INFORMATION 1 Function Select to display the weather of the current location. (P.
1. USEFUL INFORMATION DISPLAYING THE WEATHER OF THE CURRENT LOCATION 1 Display the (P.134) 2 3 Select “Current Weather”. “Weather” screen. Select the desired tab to be displayed. INFORMATION ● If weather is set to the home screen, the weather screen of the current location will be displayed. 5 INFORMATION 135 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. USEFUL INFORMATION 2. RECEIVING TRAFFIC MAP INFORMATION* Traffic map information can be received via the HD Radio. 3 Check that the “Traffic Map” screen is displayed. DISPLAYING TRAFFIC MAP INFORMATION 1 Press the “APPS” button. No. Function Current position of your car 2 Traffic information line The line color means the following: Red: Heavy congestion Yellow: Moderate traffic Green: Freely flowing traffic Select “Traffic”.
1. USEFUL INFORMATION 3. DATA SERVICES SETTINGS* SETTING DOWNLOAD METHODS Data service information, which is comprised of traffic information and weather information, can be received via the HD Radio and by the Entune App Suite application on a Bluetooth® phone. The receiving method can be set to both or only via the HD Radio. For details about the Entune App Suite application: P.263 1 Press the “APPS” button. 4 Select the desired item to be set. Select a checkbox on the right to set. No.
1. USEFUL INFORMATION 138 RAV4_Navi+MM_OM42A18U_(U) 14.04.
6 1 PERIPHERAL MONITORING SYSTEM 2 1 REAR VIEW MONITOR SYSTEM 3 1. REAR VIEW MONITOR SYSTEM .................................... 140 REAR VIEW MONITOR SYSTEM............................................ 140 4 5 DRIVING PRECAUTIONS ................... 140 SCREEN DESCRIPTION .................... 142 6 2. REAR VIEW MONITOR SYSTEM PRECAUTIONS......... 144 AREA DISPLAYED ON SCREEN........ 144 7 THE CAMERA ..................................... 144 DIFFERENCES BETWEEN THE SCREEN AND THE ACTUAL ROAD .....
1. REAR VIEW MONITOR SYSTEM 1. REAR VIEW MONITOR SYSTEM REAR VIEW MONITOR SYSTEM The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. INFORMATION ● The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.
1. REAR VIEW MONITOR SYSTEM CAUTION ● Do not use the rear view monitor system in the following cases: • On icy or slick road surfaces, or in snow • When using tire chains or emergency tires • When the back door is not closed completely • On roads that are not flat or straight, such as curves or slopes. ● In low temperatures, the screen may darken or the image may become faint. The image could distort when the vehicle is moving, or you may become unable to see the image on the screen.
1. REAR VIEW MONITOR SYSTEM SCREEN DESCRIPTION Vehicles without a smart key system The rear view monitor system screen will be displayed if the shift lever is shifted to the “R” position while the engine switch is in “ON” position. Vehicles with a smart key system The rear view monitor system screen will be displayed if the shift lever is shifted to the “R” position while the engine switch is in IGNITION ON mode. Guide lines are displayed on the screen.
1. REAR VIEW MONITOR SYSTEM CANCELING REAR VIEW MONITOR SYSTEM The rear view monitor system is canceled when the shift lever is shifted into any position other than the “R” position. 6 PERIPHERAL MONITORING SYSTEM 143 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. REAR VIEW MONITOR SYSTEM 2. REAR VIEW MONITOR SYSTEM PRECAUTIONS AREA DISPLAYED ON SCREEN The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. THE CAMERA The camera for the rear view monitor system is located as shown in the illustration. Displayed area USING THE CAMERA Screen If the camera lens becomes dirty, it cannot transmit a clear image. If water droplets, snow or mud adhere to the lens, rinse with water and wipe with a soft cloth.
1. REAR VIEW MONITOR SYSTEM NOTICE The distance guide lines and the vehicle width extension guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear to be so. Be sure to check visually. The distances between the vehicle width extension guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so. Be sure to check visually.
1. REAR VIEW MONITOR SYSTEM WHEN THE GROUND BEHIND THE VEHICLE SLOPES UP SHARPLY The distance guide lines will appear to be closer to the vehicle than the actual distance. Because of this, objects will appear to be farther away than they actually are. In the same way, there will be a margin of error between the guidelines and the actual distance/ course on the road.
1. REAR VIEW MONITOR SYSTEM WHEN ANY PART OF THE VEHICLE SAGS When any part of the vehicle sags due to the number of passengers or the distribution of the load, there is a margin of error between the fixed guide lines on the screen and the actual distance/ course on the road. VEHICLE WIDTH EXTENSION GUIDE LINES Visually check the surroundings and the area behind the vehicle.
1. REAR VIEW MONITOR SYSTEM DISTANCE GUIDE LINES Visually check the surroundings and the area behind the vehicle. On the screen, it appears that a truck is parking at point B. However, in reality if you back up to point A, you will hit the truck. On the screen, it appears that A is closest and C is furthest away. However, in reality, the distance to A and C is the same, and B is farther than A and C. Positions of A, B and C C AB C B A 148 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. REAR VIEW MONITOR SYSTEM 3. THINGS YOU SHOULD KNOW IF YOU NOTICE ANY SYMPTOMS If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.
1. REAR VIEW MONITOR SYSTEM 150 RAV4_Navi+MM_OM42A18U_(U) 14.04.
7 1 PHONE 2 1 PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 6. Bluetooth® PHONE MESSAGE FUNCTION ................................ 166 RECEIVING A MESSAGE ................... 167 CHECKING MESSAGES..................... 167 1. QUICK REFERENCE................... 152 REPLYING TO A MESSAGE (QUICK REPLY) ................................ 168 2. SOME BASICS ............................ 153 CALLING THE MESSAGE SENDER ...........................................
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 1. QUICK REFERENCE The phone top screen can be used to make a phone call. To display the hands-free operation screen, press the “APPS” button and select “Phone”, the switch on the steering wheel or switch on the instrument panel. Several functions are available to operate on each screen that is displayed by selecting the 4 tabs.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 2. SOME BASICS The hands-free system enables calls to be made and received without having to take your hands off the steering wheel. This system supports Bluetooth®. Bluetooth® is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle. The operating procedure of the phone is explained here. CAUTION ● While driving, do not use a cellular phone or connect the Bluetooth® phone.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) USING THE PHONE SWITCH/ MICROPHONE Steering switch Microphone The microphone is used when talking on the phone. By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel. VOICE COMMAND SYSTEM Press this switch to operate the voice command system. Volume control switches Press the “+” side to increase the volume. Press the “-” side to decrease the volume.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INFORMATION The following data is stored for every registered phone. When another phone is connected, the following registered data cannot be read: • Contact data • Call history data • Favorites data • Image data • All phone settings • Message settings INFORMATION ● When a phone’s registration is deleted, the above-mentioned data is also deleted.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 3. CALLING ON THE Bluetooth® PHONE After a Bluetooth® phone has been registered, a call can be made using the hands-free system. There are several methods by which a call can be made, as described below. 1 Press the “APPS” button. How to make a call list Page By favorites list 157 By call history 157 By contacts list*1 158 By dial pad*1 160 By e-mail/SMS/MMS 169 2 2 3 Select “Phone”. Select the desired tab to call from.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY FAVORITES LIST BY CALL HISTORY Calls can be made using registered contacts which can be selected from a contact list. (P.178) Up to 30 of the latest call history items (missed, incoming and outgoing) can be selected from the “Call History” tab. 1 Display the (P.156) screen. 1 Display the (P.156) 2 Select the “Favorites” tab and select the desired contact. 2 Select the “Call History” tab and se- Select the desired number.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INFORMATION ● When making a call to the same number continuously, only the most recent call is listed in call history. ● When a phone number registered in the contact list is received, the name is displayed. ● Number-withheld calls are also memorized in the system. ● International phone calls may not be made depending on the type of cellular phone you have.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) WHEN THE CONTACT IS EMPTY ■FOR PBAP COMPATIBLE ® Bluetooth PHONES ■FOR PBAP INCOMPATIBLE BUT Bluetooth® OPP COMPATIBLE PHONES 1 Select the desired item. When “Automatic Transfer” is set to on (P.173) Contacts are transferred automatically. When “Automatic Transfer” is set to off (P.173) 1 Select the desired item. No. Function Select to transfer the contacts from the connected cellular phone. Select to add a new contact manually.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY OFF HOOK SWITCH INFORMATION ● Manual transfer operation cannot be performed while driving. ● If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred. ● Depending on the type of Bluetooth® phone: • It may be necessary to perform additional steps on the phone when transferring contact data. • The registered image in the contact list may not transfer depending on the type of Bluetooth® phone connected.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) BY “Home” SCREEN 1 2 Display the home screen. (P.36) 3 Check that the “Call” screen is displayed. Select the desired contact. REGISTERING A NEW CONTACT 7 Select and hold the screen button to add a contact. 2 3 Select the desired contact. PHONE 1 Select the desired number. INFORMATION ● If there is no contact in the contacts list, the contacts cannot be registered at the home screen.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 4. RECEIVING ON THE Bluetooth® PHONE INCOMING CALLS When a call is received, this screen is displayed with a sound. 1 Select or press the switch on the steering wheel to talk on the phone. To refuse to receive the call: Select or press the switch on the steering wheel. To adjust the volume of a received call: Turn the “PWR VOL” knob, or use the volume control switch on the steering wheel.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 5. TALKING ON THE Bluetooth® PHONE While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen. No. Function Page Select to display the dial pad to send tones. 163 Select to mute your voice to the other party. INFORMATION ● Changing from hands-free call to cellular phone call is not possible while driving.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■BY SELECTING “Release Tones” “Release Tones” appear when a continuous tone signal(s) containing a (w) is registered in the contact list. TRANSMIT VOLUME SETTING 1 2 Select “Transmit Volume”. 3 Select “OK”. This operation can be performed while driving. 1 Select the desired level for the transmit volume. Select “Release Tones”. INFORMATION ● A continuous tone signal is a character string that consists of numbers and the characters p or w.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INCOMING CALL WAITING When a call is interrupted by a third party while talking, this screen is displayed. 1 Select or press the switch on the steering wheel to start talking with the other party. To refuse to receive the call: Select 7 switch on the steerPHONE or press the ing wheel. Each time is selected or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) 6. Bluetooth® PHONE MESSAGE FUNCTION Received messages can be forwarded from the connected Bluetooth® phone, enabling checking and replying using the system. Depending on the type of Bluetooth® phone connected, received messages may not be transferred to the message inbox. 3 Select . The phone top screen can be displayed by switch on the steering pressing the wheel or panel.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) RECEIVING A MESSAGE When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen. No. CHECKING MESSAGES 1 Display the message inbox screen. (P.166) 2 Select the desired message from the list. 3 Check that the message is displayed. Function Select to check the message. No. Select to not open the message.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) INFORMATION ● Reading a text message is not available while driving. ● Depending on the type of Bluetooth® phone being connected, it may be necessary to perform additional steps on the phone. ● Messages are displayed in the appropriate connected Bluetooth® phone’s registered mail address folder. Select the tab of the desired folder to be displayed. ● Only received messages on the connected Bluetooth® phone can be displayed.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■EDITING QUICK REPLY MESSAGES This operation cannot be performed while driving. 1 Select “Quick Message”. CALLING THE MESSAGE SENDER Calls can be made to an e-mail/SMS/ MMS message sender’s phone number. This operation can be performed while driving. ■CALLING FROM E-MAIL/SMS/MMS MESSAGE DISPLAY 2 Select corresponding to the desired message to edit. 3 Select “OK” when editing is completed. 1 Display the message inbox screen. (P.
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES) ■CALLING FROM A NUMBER WITHIN A MESSAGE Calls can be made to a number identified in a message’s text area. This operation cannot be performed while driving. 1 Display the message inbox screen. (P.166) 2 3 Select the desired message. Identified phone numbers contained in the message are displayed. Select the text area. 5 4 Select the desired number. Check that the “Call” screen is displayed.
2. SETUP 1. PHONE/MESSAGE SETTINGS 1 Press the “APPS” button. 2 Select “Setup”. 3 4 Select “Phone”. DISPLAYING THE PHONE/ MESSAGE SETTINGS SCREEN IN A DIFFERENT WAY 1 Display the (P.156) 2 Select “Settings”. phone top screen. Select the item to be set. PHONE/MESSAGE SETTINGS SCREEN 7 PHONE No.
2. SETUP “Sound Settings” SCREEN The call and ringtone volume can be adjusted. A ringtone can be selected. 1 2 3 Display the “Phone/Message Settings” screen. (P.171) Select “Sound Settings”. Select the desired item to be set. No. Function Select to set the desired ringtone. Select “-” or “+” to adjust the ringtone volume. Select “-” or “+” to adjust the message readout volume. Select to set the desired incoming SMS/MMS tone. Select “-” or “+” to adjust the incoming SMS/MMS tone volume.
2. SETUP “Contact/Call History Settings” SCREEN No. Function Page For PBAP compatible Bluetooth® phones, select to set automatic contact/ history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred. Select to update contacts from the connected phone. 174 Select to sort contacts by the first name or last name field. Select to add contacts to the favorites list. 178 Select to delete contacts from the favorites list.
2. SETUP ■FOR PBAP INCOMPATIBLE BUT INFORMATION ● Depending on the type of phone, certain functions may not be available. ● Contact data is managed independently for every registered phone. When one phone is connected, another phone’s registered data cannot be read. UPDATE CONTACTS FROM PHONE If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred. PBAP COMPATIBLE Bluetooth® PHONES 1 Select “Update Phone”.
2. SETUP ■UPDATING THE CONTACTS IN A REGISTERING A NEW CONTACT TO THE CONTACT LIST DIFFERENT WAY (FROM THE “Call History” SCREEN) For only OPP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.173) 1 Display the (P.156) 2 Select the “Call History” tab and select a contact not yet registered in the contact list. 3 4 5 phone top screen. Select “Update Contact”. Select the desired contact. Select a phone type for the phone number.
2. SETUP ■REGISTERING A NEW CONTACT IN A DIFFERENT WAY (FROM THE “Call History” SCREEN) For only OPP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.173) 1 Display the (P.156) 2 Select the “Call History” tab and select a contact not yet registered in the contact list. 3 4 Select “Add to Contacts”. phone top screen.
2. SETUP ■EDITING THE CONTACT IN A DIF- DELETING THE CONTACT DATA FERENT WAY (FROM THE “Contact Details” SCREEN) 1 Display the (P.156) 2 Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact. 3 phone top screen. Select “Edit Contact”. For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P.173) 1 2 Select “Delete Contacts”. 3 Select “Yes” when the confirmation screen appears.
2. SETUP ■DELETING THE CONTACT IN A DIFFERENT WAY (FROM THE “Contact Details” SCREEN) 1 Display the (P.156) 2 Select the “Contacts”, “Call History” tab or the “Favorites” tab and select the desired contact. 3 4 phone top screen. Select “Delete Contact”. FAVORITES LIST SETTING Up to 15 contacts (maximum of 4 numbers per contact) can be registered in the favorites list. ■REGISTERING THE CONTACTS IN THE FAVORITES LIST 1 2 Select “Yes” when the confirmation screen appears. Select “Add Favorite”.
2. SETUP When 15 contacts have already been registered to the favorites list 1 When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact. 2 Select the contact to be replaced. 3 Check that a confirmation screen is displayed when the operation is complete. Registering contacts in the favorites list in a different way (from the “Contacts” screen) 1 Display the (P.
2. SETUP ■DELETING THE CONTACTS IN THE FAVORITES LIST 1 2 Select “Remove Favorite”. Select the desired contacts and select “Remove”. 3 Select “Yes” when the confirmation screen appears. 4 Check that a confirmation screen is displayed when the operation is complete. Deleting contacts in the favorites list in a different way (from the “Contacts” screen) 1 Display the (P.156) 2 3 Select the “Contacts” tab. phone top screen.
2. SETUP “Messaging Settings” SCREEN 1 Display the “Phone/Message Settings” screen. (P.171) 2 3 Select “Messaging Settings”. Select the desired item to be set. No. Function Select to set automatic message transfer on/off. Select to set automatic message readout on/off. Select to set the SMS/MMS notification popup on/off. Select to set the e-mail notification popup on/off. Select to set adding the vehicle signature to outgoing messages on/off.
2. SETUP INFORMATION ● Depending on the phone, these functions may not be available. DISPLAYING THE “Messaging Settings” SCREEN IN A DIFFERENT WAY 1 Display the (P.156) 2 Select 3 Select “Settings”. phone top “Phone Display Settings” SCREEN 1 Display the “Phone/Message Settings” screen. (P.171) 2 3 Select “Phone Display Settings”. Select the desired item to be set. screen. . No. Function Select to change the incoming call display.
3. WHAT TO DO IF... 1. TROUBLESHOOTING If there is a problem with the hands-free system or a Bluetooth® device, first check the table below. When using the hands-free system with a Bluetooth® device Page Symptom Likely cause The connected device may not be a compatible The hands-free sys- Bluetooth® cellular phone. tem or Bluetooth® device does not work.
3. WHAT TO DO IF... When registering/connecting a cellular phone Page Symptom A cellular phone cannot be registered. Likely cause Solution An incorrect passcode was entered on the cellular phone. Cellular phone This system Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side. Complete the registration operation on the cellular phone (approve registration on the phone).
3. WHAT TO DO IF... Page Symptom “Unable to Please check phone.” dial. your Likely cause Solution Bluetooth® function is not enabled on the cellular phone. Old registration information remains on either this system or the cellular phone. Cellular phone This system Enable the Bluetooth® function on the cellular phone. Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system.
3. WHAT TO DO IF... When using the phonebook Page Symptom Phonebook data cannot be transferred manually/automatically. Phonebook data cannot be edited. Likely cause Solution Cellular phone This system The profile version of the connected cellular phone may not be compatible with transferring phonebook data. For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.
3. WHAT TO DO IF... When using the Bluetooth® message function Page Symptom Messages cannot be viewed. New message notifications are not displayed. Likely cause Solution Message transfer is not enabled on the cellular phone. Cellular phone This system Enable message transfer on the cellular phone (approve message transfer on the phone). Automatic transfer function on this system is set to off. Set automatic transfer function on this system to on.
3. WHAT TO DO IF... In other situations Page Symptom Likely cause Solution Connection confirmation display on this system is set to on. To turn off the display, set connection confirmation display on this system to off. Cellular phone This system 51 The Bluetooth® connection status is displayed at the top of the screen each time the engine switch is in following. Vehicles without a smart key system The engine switch is turned to the “ACC” or “ON” position.
3. WHAT TO DO IF... Page Symptom Even though all conceivable measures have been taken, the symptom status does not change. Likely cause Solution The cellular phone is not close enough to this system. Cellular phone This system Bring the cellular phone closer to this system. Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular phone. Stop the cellular phone’s security software and close all applications.
8 NAVIGATION SYSTEM * 1 BASIC OPERATION 1. QUICK REFERENCE ................... 192 MAP SCREEN ..................................... 192 NAVIGATION OPTIONS SCREEN ........................................... 194 2 DESTINATION SEARCH 1. DESTINATION SEARCH SCREEN .................................... 208 2. SEARCH OPERATION................ 210 SELECTING SEARCH AREA .............. 211 2. MAP SCREEN OPERATION ....... 195 CURRENT POSITION DISPLAY ......... 195 MAP SCALE ......................................
8 1 NAVIGATION SYSTEM * 2 3 SETTING UP ADDRESS BOOK.......... 239 ROUTE GUIDANCE SETTING UP AREAS TO AVOID ........ 241 DELETING PREVIOUS DESTINATIONS ................................ 243 1. ROUTE GUIDANCE SCREEN .................................... 224 SCREEN FOR ROUTE GUIDANCE ....................................... 224 5 WHEN APPROACHING INTERSECTION ............................... 227 5 1. DETAILED NAVIGATION SETTINGS................................. 244 SCREENS FOR NAVIGATION SETTINGS .......
1. BASIC OPERATION 1. QUICK REFERENCE MAP SCREEN To display this screen, press the “APPS” button, then select “Navigation” on the “Apps” screen. No. Name Function Page 2D North-up, 2D heading-up or 3D heading-up symbol Indicates whether the map orientation is set to north-up or heading-up. The letter(s) beside this symbol indicate the vehicle’s heading direction (e.g. N for north). In 3D map, only a heading-up view is available. 196 Options button Select to display the “Navigation Options” screen.
1. BASIC OPERATION No. Name Function Page Zoom in/out button Select to magnify or reduce the map scale. When either button is selected, the map scale indicator bar appears at the bottom of the screen. 195 Footprint button Select to display the footprint map screen. 196 Select to display the current position address. Select to repeat voice guidance. 229 Select to display the “Destination” screen. 208 Speed limit icon Indicates the speed limit on the current road.
1. BASIC OPERATION NAVIGATION OPTIONS SCREEN The navigation options allow you to change map configurations, display/hide POI icons, and edit the navigation routes. To display the “Navigation Options” screen, press the “APPS” button, select “Navigation” on the “Apps” screen, and select “Options” on the map screen. No. Function Page Select to display the desired map configuration. 197 Select to set display of the map information such as POI icons, route trace, speed limit, etc.
1. BASIC OPERATION 2. MAP SCREEN OPERATION CURRENT POSITION DISPLAY 1 Press the “APPS” button. MAP SCALE 1 Select or to change the scale of the map screen. The scale indicator bar appears at the bottom of the screen. 2 3 Select “Navigation”. Check that the current position map is displayed. Select and hold or to continue changing the scale of the map screen. The scale of the map screen can also be changed by selecting the scale bar directly. This function is not available while driving.
1. BASIC OPERATION FOOTPRINT MAP For areas covered by the footprint map (some major cities), a footprint map on a scale of 75 ft. (25 m) can be selected. When the map is scaled down to 150 ft. (50 m), changes to and can be selected to display the footprint map. 1 Select 2 Check that the footprint map is displayed.
1. BASIC OPERATION 3D screen SWITCHING THE MAP MODE 1 2 3 Select “Options” on the map screen. Select “Map Mode”. Select the desired configuration button. : North-up symbol Regardless of the direction of vehicle travel, north is always up. : Heading-up symbol The direction of vehicle travel is always up. : 3D Heading-up symbol The direction of vehicle travel is always up. The letter(s) beside this symbol indicate the vehicle’s heading direction (e.g. N for north). No.
1. BASIC OPERATION ■MAP ONLY Editing right map The right side map can be edited. 1 2 Select any point on the right side map. Select the desired item. ■DUAL MAP No. The map on the left is the main map. Function Page Select to change the orientation of the map. 196 Select to display POI icons. 201 Select to show traffic information. 205 Select to change the map scale. 195 When set to on, the indicator will illuminate. 198 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. BASIC OPERATION ■COMPASS Information about the destination, current position and a compass is displayed on the screen. SCREEN SCROLL OPERATION Use the scroll feature to move the desired point to the center of the screen for looking at a point on the map that is different from the current position. INFORMATION ● The destination mark is displayed in the direction of the destination.
1. BASIC OPERATION ADJUSTING LOCATION IN SMALL INCREMENTS The cursor location can be adjusted in small increments when “Adjust Location” is selected on the setting map screen. Also, when changing the location of memory points on the editing screen (P.241) and adjusting the current position mark manually on the “Calibration” screen (P.246), 8 directional arrows may appear for this purpose. 1 Select one of the 8 directional arrows to move the cursor to the desired point and then select “OK”.
1. BASIC OPERATION 3. MAP SCREEN INFORMATION SELECTING THE POI ICONS DISPLAYING MAP INFORMATION Information such as POI icons, route trace, speed limit, etc. can be displayed on the map screen. 1 2 3 1 Display the “Map Information” screen. (P.201) 2 Select “Select POI”. Select “Options” on the map screen. When the POI icons to be displayed on the map screen have already been set, “Change POI” is displayed. Select “Map Information”. 3 Select the desired items to be displayed.
1. BASIC OPERATION ■SELECTING OTHER POI ICONS TO ■DISPLAYING THE LOCAL POI LIST BE DISPLAYED 1 2 Select “Other POIs”. Select the desired POI categories and select “OK”. “List All Categories”: Select to display all POI categories. To add more POI categories, select “More”. POIs that are within 20 miles (32 km) of the current position will be listed from among the selected categories. 1 2 Select “Find Local POI”. Select the desired POI. “Near...
1. BASIC OPERATION ROUTE TRACE The traveled route can be stored and retraced on the map screen. This feature is available when the map scale is 30 miles (50 km) or less. 1 Display the “Map Information” screen. (P.201) 2 Select “Route Trace”. DISPLAYING INFORMATION ABOUT THE ICON WHERE THE CURSOR IS SET When the cursor is placed over an icon on the map screen, the name bar is displayed on the upper part of the screen.
1. BASIC OPERATION Destination information STANDARD MAP ICONS Icon Name Island Park No. Function Industry Select to register as a memory point. To change the icon, name, etc.: P.239 Business facility Select to set as a destination. Airport Select to call the registered number. Select to delete destination or memory point. Select to display the edit memory point screen.
1. BASIC OPERATION 4. TRAFFIC INFORMATION Traffic data can be received via HD or Entune App Suite to display traffic information on the map screen. 1 2 3 DISPLAYING TRAFFIC INFORMATION A list of current traffic information can be displayed along with information on the incident’s distance and position relative to the vehicle. Press the “APPS” button. 1 Display the “Traffic screen. (P.205) 2 3 Select “Traffic Event List”. Information” Select the desired traffic information.
1. BASIC OPERATION DISPLAYING PREDICTIVE TRAFFIC INFORMATION A map with predictive traffic data can be displayed. 1 2 3 Display the “Traffic screen. (P.205) Information” MY TRAFFIC ROUTES Traffic information along the saved routes can be displayed. To use this function, it is necessary to register a route. (P.250) 1 Display the “Traffic screen. (P.205) 2 Select “My Traffic Routes”. Select “Predictive Traffic Map”.
1. BASIC OPERATION DISPLAYING TRAFFIC INFORMATION ON THE MAP 1 2 3 Select “Options” on the map screen. Select “Map Information”. Select “Traffic Information”. No. Information/Function The icons show traffic incident, road repair, traffic obstacles, etc. Select to display traffic information and start voice guidance for the traffic information. When set to on, the indicator will illuminate. The color of the arrow changes depending on the traffic information received.
2. DESTINATION SEARCH 1. DESTINATION SEARCH SCREEN The “Destination” screen enables to search for a destination. To display the “Destination” screen, press the “APPS” button, and select “Navigation” on the “Apps” screen. Then select “Dest.” on the map screen. No. Function Page Select to search for a destination by address. 212 Select to search for a destination by point of interest. 213 Select to search for a destination from previously set destinations.
2. DESTINATION SEARCH No. Function Page Select to set a destination from preset destinations. 211 Select to delete set destinations. 231 8 NAVIGATION SYSTEM 209 RAV4_Navi+MM_OM42A18U_(U) 14.04.
2. DESTINATION SEARCH 2. SEARCH OPERATION 1 Press the “APPS” button. 5 2 Select “Navigation”. 3 4 Select “Dest.”. Select to adjust the position in smaller increments. (P.200) Search for a destination. Select to register as a memory point. Select “Go” when the confirm destination screen is displayed. No. Function Select to call the registered number. There are different kinds of methods to search for a destination. (P.208) Select to search for the route. (P.
2. DESTINATION SEARCH SELECTING SEARCH AREA The selected state (province) can be changed to set a destination from a different state (province) by using “Address”, “Point of Interest” or “Intersection & Freeway”. 1 Display the (P.210) 2 Select “Address”, “Point of Interest” or “Intersection & Freeway”. 3 Select “Select State/Province” or “Change State/Province”. “Destination” screen. If a state (province) has not been selected yet, “Select State/Province” is displayed.
2. DESTINATION SEARCH SEARCHING BY STREET ADDRESS SEARCHING BY ADDRESS There are 2 methods to search for a destination by address. 1 Display the (P.210) 2 3 Select “Address”. “Destination” screen. Select the desired search method. 1 2 Select “Street Address”. 3 4 5 6 Enter a street name and select “OK”. Enter a house number and select “OK”. Select the desired street name. Enter a city name and select “OK”. Select the desired city name.
2. DESTINATION SEARCH SEARCHING BY POINT OF INTEREST There are 3 methods to search for a destination by Points of Interest. 1 Display the (P.210) 2 3 Select “Point of Interest”. “Destination” SEARCHING BY NAME 1 2 3 Select “Name”. Enter a POI name and select “OK”. Select the desired POI. screen. Select the desired search method. No. No. Page Select to search by name. 213 Select to search by category. 214 Select to search by phone number.
2. DESTINATION SEARCH ■SELECTING A CITY TO SEARCH 1 2 Select “City”. Enter a city name and select “OK”. “Any City”: Select to cancel the city setting. 3 4 SEARCHING BY CATEGORY 1 2 Select “Category”. Select the desired search point. Select the desired city name. Select the desired POI. ■SELECTING FROM THE CATEGORIES 1 2 Select “Category”. No. Select the desired category. Function Select to set the search point from near the current position. Select to search for POIs along the set route.
2. DESTINATION SEARCH SEARCHING BY PHONE NUMBER INFORMATION ● The names of POIs located within approximately 200 miles (320 km) from the selected search point can be displayed. When “Near a City Center in XX*” is selected 1 2 1 2 Select “Phone #”. Enter a phone number and select “OK”. If there is more than 1 site with the same number, the list screen will be displayed. Select “Near a City Center in XX”. Enter a city name and select “OK”.
2. DESTINATION SEARCH SEARCHING FROM PREVIOUS DESTINATIONS 1 Display the (P.210) 2 3 Select “Previous Destinations”. “Destination” screen. Select the desired destination. “Previous Start Point”: Select to display the start point map of the previous guided route. “Delete”: Select to delete the previous destination. (P.243) SEARCHING BY ADDRESS BOOK To use this function, it is necessary to register an address book entry. (P.239) 1 Display the (P.210) 2 3 Select “Address Book”.
2. DESTINATION SEARCH SEARCHING BY EMERGENCY 1 Display the (P.210) 2 3 Select “Emergency”. 4 “Destination” SEARCHING BY INTERSECTION AND FREEWAY screen. Select the desired emergency category. There are 2 methods to search for a destination by Intersection & Freeway. 1 Display the (P.210) 2 3 Select “Intersection & Freeway”. “Destination” screen. Select the desired method. Select the desired destination.
2. DESTINATION SEARCH SEARCHING BY INTERSECTION 1 2 Select “Intersection”. 3 SEARCHING BY FREEWAY ENTRANCE/EXIT 1 2 Select “Freeway Entrance / Exit”. 3 4 Select the desired freeway. Select the desired street name. 4 Enter the name of the second intersecting street and select “OK”. 5 5 Enter a freeway entrance or exit name and select “OK”. Select the desired street name. 6 Select the desired entrance or exit name.
2. DESTINATION SEARCH SEARCHING BY MAP SEARCHING BY COORDINATES By selecting “Map” the last displayed location is displayed again on the map screen. You can search for a destination from this map. 1 Display the (P.210) 2 3 Select “Map”. “Destination” screen. 1 Display the (P.210) 2 3 Select “Coordinates”. “Destination” screen. Enter the latitude and longitude and select “OK”. Scroll the map to the desired point and select “Go to ”.
2. DESTINATION SEARCH 3. STARTING ROUTE GUIDANCE When the destination is set, the entire route map from the current position to the destination is displayed. STARTING ROUTE GUIDANCE 1 Select “OK” to start guidance. No. Select the desired route from 3 possible routes. (P.221) change the ● Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such changed information.
2. DESTINATION SEARCH 3 ROUTES SELECTION ■DISPLAYING 3 ROUTES INFORMATION 1 2 Select “3 Routes”. Select the desired route. No. 1 2 Select “Info”. Check that the “3 Route Information” screen is displayed. Function Select to display the quickest route. No. Information Select to display the route that is the shortest distance to the set destination. Time necessary for the entire trip Select to display the alternative route.
2. DESTINATION SEARCH DISPLAYING TURN LIST A list of turn information from the current position to the destination can be displayed. 1 2 Select “Turn List”. Check that the turn list is displayed. No. Information EDITING ROUTE Destinations can be added, reordered or deleted, and conditions for the route to the destination can be changed. 1 2 Select “Edit Route”. Select the desired item. Function Page Current position Select to add destinations.
2. DESTINATION SEARCH PAUSING GUIDANCE 1 2 Select “Options” on the map screen. Select “Pause Guidance”. RESUMING GUIDANCE 1 Select “Resume Guidance”. 8 NAVIGATION SYSTEM 223 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. ROUTE GUIDANCE 1. ROUTE GUIDANCE SCREEN During the route guidance, various types of guidance screens can be displayed depending on conditions. SCREEN FOR ROUTE GUIDANCE CHANGING ROUTE INFORMATION BAR When the vehicle is on the guidance route, the route information bar displays the current street name or the distance with the estimated travel/arrival time to the destination.
3. ROUTE GUIDANCE DISTANCE AND TIME TO DESTINATION When driving on the guidance route with more than 1 destination set, a list of the distance with estimated travel/ arrival time from the current position to each destination is displayed. 1 2 Select the route information bar. Check that the list of the distance and time is displayed. ROUTE OVERVIEW The entire route from the current position to the destination can be displayed during the route guidance. 1 2 3 Select “Options” on the map screen.
3. ROUTE GUIDANCE DURING FREEWAY DRIVING During freeway driving, the freeway exit information screen will be displayed. No./ Icon Information/Function Distance and time from the current position to the road traffic facilities. Name of the road traffic facilities. WHEN APPROACHING FREEWAY EXIT OR JUNCTION When the vehicle approaches an exit or junction, the freeway guidance screen will be displayed. No.
3. ROUTE GUIDANCE TOLLGATE GUIDANCE When the vehicle approaches a tollgate, the tollgate view will be displayed. No. WHEN APPROACHING INTERSECTION When the vehicle approaches an intersection, the intersection guidance screen will be displayed. Information/Function Distance from the current position to the tollgate No. Information/Function Next street name Select to hide the tollgate guidance screen. To return to the tollgate guidance screen, select .
3. ROUTE GUIDANCE TURN LIST SCREEN 1 Select “Turn List” on the “Map Mode” screen. (P.197) 2 Check that the turn list screen is displayed. No. TURN-BY-TURN ARROW SCREEN On this screen, information about the next turn on the guidance route can be displayed. 1 Select “Turn-by-Turn Arrow” on the “Map Mode” screen. (P.197) 2 Check that the turn-by-turn arrow screen is displayed. Information/Function Turn direction Distance between turns Next street or destination name No.
3. ROUTE GUIDANCE 2. TYPICAL VOICE GUIDANCE PROMPTS As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the system’s voice guidance will provide various messages. CAUTION ● Be sure to obey the traffic regulations and keep the road condition in mind especially when you are driving on IPD roads (roads that are not completely digitized in our database). The route guidance may not have the updated information such as the direction of a one way street.
3. ROUTE GUIDANCE 3. EDITING ROUTE 1 Press the “APPS” button. 5 Select the item to be set. No. Function Page 2 Select “Navigation”. Select to add destinations. 231 3 4 Select “Options”. Select to delete destinations. 231 Select to reorder destinations. 231 Select to set route preferences. 232 Select to change route type. 232 Select to set detours. 233 Select to start from adjacent road. 234 Select “Edit Route”. 6 Check that the entire route map is displayed. (P.
3. ROUTE GUIDANCE ADDING DESTINATIONS 1 Display the (P.230) 2 3 Select “Add”. 4 “Edit Route” DELETING DESTINATIONS screen. Search for an additional destination in the same way as a destination search. (P.208) Select “Add Destination Here” to insert the new destination into the route. 1 Display the (P.230) 2 3 Select “Delete”. “Edit Route” screen. Select “Yes” when the confirmation screen appears. When more than 1 destination has been set, a list will be displayed on the screen.
3. ROUTE GUIDANCE SETTING ROUTE PREFERENCES SELECTING ROUTE TYPE The conditions to determine the route can be selected from various choices such as freeways, toll roads, ferries, etc. 1 Display the (P.230) 2 3 Select “Preferences”. “Edit Route” 1 Display the (P.230) 2 3 Select “Route Type”. “Edit Route” screen. Select the desired route type. screen. Select the desired route preferences and select “OK”. During driving, the route guidance starts after selecting the desired route type.
3. ROUTE GUIDANCE 3 DETOUR SETTING Select the desired detour distance. During the route guidance, the route can be changed to detour around a section of the route where a delay is caused by road repairs, an accident, etc. 1 2 Display the (P.230) “Edit Select “Detour”. Route” screen. No. Function Select to detour within 1 mile of the current position. Select to detour within 3 miles of the current position. Select to detour within 5 miles of the current position.
3. ROUTE GUIDANCE INFORMATION STARTING FROM ADJACENT ROAD When a freeway and a surface road run in parallel, the system may show the guidance route going on the freeway while driving on the surface road, or vice versa. ● This picture shows an example of how the system would guide around a delay caused by a traffic jam. This position indicates the location of a traffic jam caused by road repairs, an accident, etc. This route indicates the detour suggested by the system.
4. MEMORY POINTS 1. MEMORY POINTS SETTINGS Home, preset destinations, address book entries, areas to avoid can be set as memory points. The registered points can be used as the destinations. (P.208) 4 Select the desired item to be set. Registered areas to avoid, will be avoided when the system searches for a route. 1 2 3 Press the “APPS” button. Select “Setup”. Select “Navigation”. No. Function Page Select to set home. 236 Select to set preset destinations.
4. MEMORY POINTS EDITING HOME SETTING UP HOME If home has been registered, that information can be recalled by selecting “Go Home” on the “Destination” screen. (P.211) 1 Display the “Navigation screen. (P.235) 2 3 Select “Home”. 1 2 Select “Edit”. Select the desired item to be edited. Settings” Select the desired item to be set. No. No. Function Page Select to register home. 236 Select to edit home. 236 Select to delete home. 236 3 Select “Set Home”.
4. MEMORY POINTS REGISTERING PRESET DESTINATIONS SETTING UP PRESET DESTINATIONS If a preset destination has been registered, that information can be recalled by using preset destinations on the “Destination” screen. (P.211) 1 Display the “Navigation screen. (P.235) 2 3 Select “Preset Destinations”. 1 2 Select “Set”. 3 Select a position for this preset destination. 4 Select “OK” when the editing preset destination screen appears. (P.
4. MEMORY POINTS EDITING PRESET DESTINATIONS 1 2 3 DELETING PRESET DESTINATIONS Select “Edit”. Select the desired preset destination. 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. Select the item to be edited. No. 4 Function Page Select to edit the preset destination name. 241 Select to set display of the preset destination name on/off. Select to edit location information. 241 Select to edit the phone number.
4. MEMORY POINTS EDITING ADDRESS BOOK ENTRIES SETTING UP ADDRESS BOOK Points on the map can be registered. 1 Display the “Navigation screen. (P.235) 2 3 Select “Address Book”. Settings” 1 2 3 Select the desired item. No. The icon, name, location and/or phone number of a registered address book entry can be edited. Function Page Select to register address book entries. Select “Edit”. Select the desired address book entry. Select the item to be edited. No.
4. MEMORY POINTS ■CHANGING THE ICON 1 2 Select “Edit” next to the “Icon”. Select the desired icon. When the “With Sound” tab is selected A sound for some address book entries can be set. When the vehicle approaches the location of the address book entry, the selected sound will be heard. 1 2 Select the “With Sound” tab. Select the desired sound icon. : Select to play the sound. Change pages by selecting the “Page 1”, “Page 2” or “With Sound” tab.
4. MEMORY POINTS ■CHANGING THE NAME 1 2 Select “Edit” next to “Name”. Enter a name and select “OK”. ■CHANGING THE LOCATION 1 2 Select “Edit” next to “Location”. Scroll the map to the desired point (P.200) and select “OK”. ■CHANGING PHONE NUMBER 1 Select “Edit” next to “Phone #”. 2 Enter the phone number and select “OK”. SETTING UP AREAS TO AVOID Areas to be avoided because of traffic jams, construction work or other reasons can be registered as “Areas to Avoid”.
4. MEMORY POINTS REGISTERING AREAS TO AVOID 1 2 Select “New”. Select the desired item to search for the location. (P.208) 3 Select either or to change the size of the area to be avoided and select “OK”. EDITING AREAS TO AVOID The name, location and/or area size of a registered area can be edited. 1 2 3 Select “Edit”. Select the area and select “OK”. Select the item to be edited. No. 4 Select “OK” when the editing area to avoid screen appears.
4. MEMORY POINTS ■CHANGING THE NAME 1 2 Select “Edit” next to “Name”. Enter a name and select “OK”. DELETING AREAS TO AVOID 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. ■CHANGING THE LOCATION 1 2 Select “Edit” next to “Location”. Scroll the map to the desired point (P.200) and select “OK”. ■CHANGING THE AREA SIZE 1 Select “Edit” next to “Size”. 2 Select either or to change the size of the area to be avoided and select “OK”.
5. SETUP 1. DETAILED NAVIGATION SETTINGS Settings are available for pop-up information, favorite POI categories, low fuel warning, etc. 1 Press the “APPS” button. 2 3 4 5 6 Select “Setup”. SCREENS FOR NAVIGATION SETTINGS Select “Navigation”. Select “Detailed Navi. Settings”. Select the items to be set. Select “OK”. 244 RAV4_Navi+MM_OM42A18U_(U) 14.04.
5. SETUP No. Function Page Select to set the voice guidance for the next street name on/off. Select to set IPD road guidance on/off. Select to set favorite POI categories that are used for POI selection to display on the map screen. 245 Select to adjust the current position mark manually or to adjust miscalculation of the distance caused by tire replacement. 246 Select to set display of popup information on/off. Select to set display of low fuel warning on/off.
5. SETUP CURRENT POSITION/TIRE CHANGE CALIBRATION The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted. 1 Display the “Detailed Navi. Settings” screen. (P.244) 2 3 Select “Calibration”. Select the desired item. ■POSITION/DIRECTION CALIBRA- TION When driving, the current position mark will be automatically corrected by GPS signals.
5. SETUP LOW FUEL WARNING POP-UP When the fuel level is low, a warning message will pop up on the screen. 1 Display the “Detailed Navi. Settings” screen. (P.244) 2 Select “Low Fuel Warning Pop-up”. ■SEARCHING GAS STATION IN LOW FUEL WARNING A nearby gas station can be selected as a destination. 1 Select “Yes” when the low fuel warning appears. 2 Select the desired nearby gas station. 8 Select “Enter tion.
5. SETUP 2. TRAFFIC SETTINGS Traffic information such as traffic congestion or traffic incident warnings can be made available. 1 Press the “APPS” button. 2 3 4 5 Select “Setup”. SCREEN FOR TRAFFIC SETTINGS Select “Traffic”. Select the items to be set. Select “OK”. No. Function Select to set specific routes (such as frequently used routes) on which you wish to receive traffic information. (P.250) Select to set the avoid traffic function auto/manual. (P.
5. SETUP AUTO AVOID TRAFFIC 1 Display the “Traffic Settings” screen. (P.248) 2 3 Select “Avoid Traffic”. Select the desired item. No. Function Select to automatically change routes when congestion information of the guidance route has been received. LY When the navigation system calculates a new route, the following screen will be displayed. 1 Select the desired item. No. Function Select to start route guidance using the new route. Select to confirm the new route and current route on the map.
5. SETUP REGISTERING PERSONAL ROUTES MY TRAFFIC ROUTES Specific routes (such as frequently used routes) on which you wish to receive traffic information can be registered as “My Traffic Routes”. A route is set by defining a start point and end point, and can be adjusted by setting up to 2 preferred roads. 1 Display the “Traffic Settings” screen. (P.248) 2 3 Select “My Traffic Routes”. Select the desired item. No. Function Page Select to register personal routes.
5. SETUP EDITING PERSONAL ROUTES 1 2 3 DELETING PERSONAL ROUTES Select “Edit”. Select the desired traffic route. 1 2 Select “Delete”. 3 Select “Yes” when the confirmation screen appears. Select the traffic route to be deleted and select “Delete”. Select “Edit” next to the item to be edited. 8 Function Page NAVIGATION SYSTEM No. Select to edit the name of the personal route. Select to edit start location. 250 Select to edit end location. Select to see and modify the entire route.
5. SETUP SETTING PREFERRED ROADS “My Traffic Routes” can be adjusted by setting up to 2 preferred roads. 1 Select “Set Preferred Roads”. 2 ■ADDING PREFERRED ROADS 1 Select “Add”. If two preferred roads are already set, select “Yes” and delete a preferred road before add a new one. 2 Scroll the map to the desired point and select “OK”. 3 Select “OK” to use this road. Select the desired item. “Next”: Select to change road. 4 No. Function Page Select to add preferred roads.
5. SETUP ■MODIFYING PREFERRED ROADS ■DELETING PREFERRED ROADS 1 2 Select “Modify”. 1 2 3 Scroll the map to the desired point and select “OK”. Select the preferred road to be modified if 2 preferred roads have been set. Select “Delete”. Select the preferred road to be deleted if 2 preferred roads have been set. “Delete All”: Select to delete all preferred roads on the list. 3 Select “Yes” when the confirmation screen appears. 8 NAVIGATION SYSTEM 4 Select “OK” to use this road.
6. TIPS FOR THE NAVIGATION SYSTEM 1. GPS (GLOBAL POSITIONING SYSTEM) LIMITATIONS OF THE NAVIGATION SYSTEM This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc. However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances. The Global Positioning System (GPS) developed and operated by the U.S.
6. TIPS FOR THE NAVIGATION SYSTEM Accurate current position may not be shown in the following cases: • When driving on a small angled Yshaped road. • When driving on a winding road. • When driving on a slippery road such as in sand, gravel, snow, etc. • When driving on a long straight road. • When freeway and surface streets run in parallel. • After moving by ferry or vehicle carrier. • When a long route is searched during high speed driving.
6. TIPS FOR THE NAVIGATION SYSTEM 2. MAP DATABASE VERSION AND COVERED AREA MAP INFORMATION 5 Check that the map data screen is displayed. Coverage areas and legal information can be displayed and map data can be updated. 1 Press the “APPS” button. No. Function Map version Select to display map coverage areas. Select to display legal information. 2 3 4 Select “Navigation”. Select “Options”. Select “Map Data”. INFORMATION ● Map data updates are available for a fee.
6. TIPS FOR THE NAVIGATION SYSTEM ABOUT THE MAP DATA Map data for the navigation system is contained in a SD card that is inserted in the SD card slot. Do not eject the SD card, as doing so may deactivate the navigation system. NOTICE ● Do not edit or delete the map data on the SD card, as doing so may deactivate the navigation system. 8 NAVIGATION SYSTEM INFORMATION ● microSDHC Logo is a trademark of SD3C,LLC. 257 RAV4_Navi+MM_OM42A18U_(U) 14.04.
6. TIPS FOR THE NAVIGATION SYSTEM 258 RAV4_Navi+MM_OM42A18U_(U) 14.04.
9 1 Entune App Suite * 2 1 Entune App Suite OVERVIEW 3 1. Entune App Suite SERVICE ................................... 260 4 BEFORE USING THE FUNCTION ........................................ 262 PREPARATION BEFORE USING Entune App Suite .............................. 263 2 5 6 Entune App Suite OPERATION 1. Entune App Suite ....................... 265 7 USING Entune App Suite..................... 265 LINKING Entune App Suite AND NAVIGATION FUNCTION.................
1. Entune App Suite OVERVIEW 1. Entune App Suite SERVICE* Entune App Suite is a service that enables downloadable applications to be displayed on and operated from the screen. Before Entune App Suite can be used, a few actions need to be performed first. (P.263) *: Entune App Suite is available in the contiguous United States, D.C. and Alaska. 260 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1. Entune App Suite OVERVIEW No. Name Function Content provider Provides content to the system via a cellular phone. Application server Provides downloadable application to the system via a cellular phone. Cellular phone* Using the Entune App Suite application, communication is relayed between the system, the application server and the contents provider.
1. Entune App Suite OVERVIEW BEFORE USING THE FUNCTION SUBSCRIPTION User registration is required to start using the Entune App Suite service. Entune App suite does not require an activation fee or monthly recurring fees. Services requiring a separate contract can also be used.* *: For details, refer to http://www.toyota.com/entune/ or call 1-800-331-4331. AVAILABILITY OF SERVICE INITIALIZING PERSONAL DATA The personal data used in applications can be removed from the system. (P.
1. Entune App Suite OVERVIEW PREPARATION BEFORE USING Entune App Suite USER REGISTRATION 1 Perform user registration at http://www.toyota.com/entune/. SETUP REQUIRED TO USE Entune App Suite Perform the following actions. 1 User registration 2 Download the Entune App Suite application to your cellular phone. 3 Register the cellular phone to the system. 4 Download Entune App Suite applications to the system.
1. Entune App Suite OVERVIEW REGISTERING THE Entune App Suite APPLICATION 1 Download the Entune App Suite application to your cellular phone. 2 Run the Entune App Suite application on your cellular phone. 3 Enter the information required into the Entune App Suite application. Login to the application. INFORMATION ● Applications can only be used when the Entune App Suite application has been downloaded to your cellular phone and the application is running.
2. Entune App Suite OPERATION 1. Entune App Suite USING Entune App Suite 2 Select the desired application button. Entune App Suite is a service that enables the usable contents of a cellular phone to be displayed on and operated from the screen. Before Entune App Suite can be used, a few actions need to be performed first. (P.263) For details about the function and service of each application, refer to http://www.toyota.com/entune/. 1 Press the “APPS” button. No.
2. Entune App Suite OPERATION UPDATING an application 3 Check that downloading is completed. When Entune App Suite is activated, an application may need to be updated. By updating, an application can be kept to the latest version. When updating the application, it is necessary to download the updated data and install it. ■DOWNLOADING THE UPDATED DATA If an update is available, “Update” can be selected. 1 Select “Update”. No. Function Select to install the update later.
2. Entune App Suite OPERATION ■INSTALLING THE UPDATED DATA After the downloading is complete, “Update” will be changed to “Install”. 1 2 Select “Install”. Select “Continue”. “Later”: Select to postpone the installation of the updated data and go back to the previous screen. 3 Check that installing is started. “Install in Background”: Select to operate other function while installing. 4 REORDERING THE APPLICATIONS Order of the applications can be changed. 1 2 Display the “Apps” screen. (P.
2. Entune App Suite OPERATION IF A MESSAGE APPEARS ON THE SCREEN When problems occur starting up the application player, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. Message Display conditions Corrective action “This feature is unavailable during an emergency call.” Safety Connect is being implemented. After Safety Connect is finished, perform the operation again.
2. Entune App Suite OPERATION SETTING A DESTINATION USING Entune App Suite LINKING Entune App Suite AND NAVIGATION FUNCTION The system can set a destination and make a hands-free call via Entune App Suite. For details about the function and service of each application, refer to http://www.toyota.com/entune/. 1 2 3 4 5 Press the “APPS” button. Locations that were searched using Entune App Suite can be set as a destination. 1 Display the “Web Search” screen. (P.
2. Entune App Suite OPERATION MAKING A PHONE CALL USING Entune App Suite Phone calls can be made to locations which were searched using Entune App Suite. 1 Display the “Web Search” screen. (P.269) 2 Select the desired application button to search. 3 Enter a search term, and select “GO”. 4 5 Select “Call”. Information can be entered to an application by the software keyboard or voice recognition. For details about the function and service of each application, refer to http://www.toyota.
2. Entune App Suite OPERATION ENTERING A KEYWORD USING THE VOICE RECOGNITION FUNCTION 1 2 Display the “Apps” screen. (P.265) 3 4 Press the talk switch. (P.124) Select the desired application button. When this screen is displayed, say the desired keyword. Completion of saying the keyword will be detected automatically. 5 Search results will be displayed on the screen. 9 Entune App Suite 271 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. SETUP 1. Entune App Suite SETTINGS Settings are available for Entune App Suite. 1 SCREEN FOR Entune App Suite SETTINGS Press the “APPS” button. No. 2 3 4 5 Select “Setup”. Select “Entune”. Function Select to set the voice guidance volume. Select to set the pop up reminder for cellular phone data usage. (P.273) Select the items to be set. Select “OK”. Select to reset all setup items. 272 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. SETUP PHONE DATA PLAN POP-UP SETTINGS The phone data plan pop-up can be set when a paid application is downloaded. 1 Display the “Entune Settings” screen. (P.272) 2 3 Select “Phone Data Plan Pop-Up”. 4 Select “OK”. Check the desired function to be operated. 9 Entune App Suite 273 RAV4_Navi+MM_OM42A18U_(U) 14.04.
3. SETUP 274 RAV4_Navi+MM_OM42A18U_(U) 14.04.
1 INDEX 2 3 4 5 6 7 8 9 275 RAV4_Navi+MM_OM42A18U_(U) 14.04.
ALPHABETICAL INDEX ALPHABETICAL INDEX A C AM/FM radio ............................................. 73 Calling on the Bluetooth® phone.............156 Available HD radio™ technology........... 80 By call history ......................................157 Caching a radio program....................... 77 By contacts list.....................................158 Overview ............................................... 73 By dial pad...........................................160 Presetting a station.
E F Editing route............................................ 230 Function index........................................... 28 Adding destinations............................. 231 Deleting destinations........................... 231 G Detour setting...................................... 233 General settings........................................ 53 Reordering destinations ...................... 231 General settings screen ........................ 53 Selecting route type ..........................
ALPHABETICAL INDEX M N Maintenance ............................................. 61 Navigation operation .................................22 Map database version and covered area ....................................... 256 Navigation system...................................191 About the map data ............................. 257 O Map information................................... 256 Operating information..............................113 Map screen information ..........................
P R Peripheral monitoring system ................. 139 Radio operation......................................... 73 Phone ..................................................... 151 Rear view monitor system....................... 140 Phone operation (Hands-free system for cellular phones).............................. 152 Driving precautions.............................. 140 Phone/message settings ........................ 171 Rear view monitor system precautions........................................
ALPHABETICAL INDEX S Some basics......................................68, 153 Screen adjustment .................................... 40 About the contacts in the contact list ........................................155 Search operation..................................... 210 Disc slot .................................................70 Searching by address.......................... 212 Searching by address book.................216 Registering/connecting a Bluetooth® phone............................
U USB memory ............................................ 93 Overview ............................................... 93 Playing a USB audio ............................. 96 Useful information................................... 134 V Voice command system.................. 123, 124 Using the voice command system ...... 124 Voice command system operation ...... 125 Voice command system operation.......... 124 Voice settings ........................................... 59 Voice settings screen ................
Map database information and updates 282 RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
Certain business data provided by Infogroup © 2012, All Rights Reserved. 288 RAV4_Navi+MM_OM42A18U_(U) 14.04.
Certification Gracenote, the Gracenote logo and logotype, “Powered by Gracenote”, MusicID, Playlist Plus and MediaVOCS are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries 289 RAV4_Navi+MM_OM42A18U_(U) 14.04.
RAV4_Navi+MM_OM42A18U_(U) 14.04.
For U.S. owners 291 RAV4_Navi+MM_OM42A18U_(U) 14.04.
U.S.A. (Without navigation function) FCC ID: BABFT0045A This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Mexico (Without navigation function) COFETEL: RCPFUFT13-1083 La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. 293 RAV4_Navi+MM_OM42A18U_(U) 14.04.
U.S.A. (With navigation function) FCC ID: BABFT0044C This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Mexico (With navigation function) COFETEL: RCPFUFT12-1493 La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. 295 RAV4_Navi+MM_OM42A18U_(U) 14.04.
