Owner's Manual

14 OPERATION
Using TomTom Navigation
■ Switching on
Your TomTom can be used without docking it
in dock. A mount is available as an accessory
so that you can use your TomTom in other
cars.
The first time you switch on your TomTom, it
may take up to 20 seconds to start. To switch
off your TomTom when it is not connected to
dock, press and hold the On/Off button for 2
seconds.
■ Setting up
To set up your navigation device, you need to
answer a few questions by tapping the
screen.
IMPORTANT
■ Troubleshooting
Always make sure that you are using the
latest version of the TomTom application on
your TomTom. You can update the
application using TomTom HOME.
If you have problems turning on your
TomTom, try resetting your TomTom.
To reset your TomTom, use a straightened
paper clip, or something similar, to push the
reset button. The reset button is on the
bottom of your TomTom. Then turn your
TomTom on.
Before you start
● Take care to select the correct language,
since the language you choose will be
used for all menus and written instructions.
Reset
On/Off
button
TACM2010_EN.book Page 14 Tuesday, October 5, 2010 3:44 PM