Operation Manual

17
Sewing preparations
Support the thread on the sewing machine with
one hand, using the other hand pass the thread
around the thread guide as shown in the diagram.
Pass the thread between the thread guide plate
and the tension disc.
Pass the thread along the groove of the thread
guide plate.
Turn the handwheel towards yourself until the
take-up lever is visible.
Pass the thread through the take-up lever.
Set the thread on the left side of the needle guide.
Check that the thread is set correctly
Raise the presser foot and pull the upper thread
towards yourself. The thread should come out
smoothly.
Lower the presser foot and pull the upper thread
towards yourself. It should be resistant and diffi-
cult to pull.
Pass the thread through the needle eye from the
front.