Operation Manual

14
Winding the lower thread
1
1
2
Turn off the
sewing machine.
9
10
Return the thread
1
winding spindle by
sliding it in the direction
of the arrow.
Note
If the thread winding
spindle is not returned,
the needle does not
move and sewing is
not possible.
Start
Complete
8
Cut the excess thread
above the bobbin hole.
Cut the thread so that no *
excess extends from the
bobbin hole.
Thread guide ( )
Main power switch
Press on the foot controller with
1
your foot to continue winding the
bobbin.
When the bobbin winding
2
becomes slow, release the foot
controller to stop winding the
bobbin.
2
1
Thread
winding
spindle
Foot controller
Note:
Prepare a
specially
designed bobbin.
Remove the bobbin from the thread winding
2
spindle, and cut the thread.
Pull up the spool pin.
Position the spool of thread and the
spool cap on to the spool pin.
Spool of thread
Spool cap
spool pin