Operation Manual

347
4-3. Do-it-yourself maintenance
4
Maintenance and care
FT86_EE
 Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
 Headlight high and low beams (discharge bulb)
 Front position lights (vehicle with discharge headlights)
 Daytime running lights (vehicle with discharge headlights)
 Stop/tail lights
 High mounted stoplight
 Condensation build-up on the inside of the lens
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
 Large drops of water are built up on the inside of the lens.
 Water has built up inside the headlight.
 Discharge headlights (if equipped)
If voltage to the discharge bulbs is insufficient, the bulbs may not come on,
or may go out temporarily. The discharge bulbs will come on when normal
power is restored.
 LED light bulbs
The front position lights (vehicles with discharge headlights), stop/tail lights
and high mounted stoplight consist of a number of LEDs. If any of the LEDs
burn out, take your vehicle to any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional to have the light replaced.