Operation Manual

169

2-1. Driving procedures

When driving

FT86_EE

Engine (ignition) switch (vehicles with a smart entry & start system)

Performing the following operations when carrying the electronic

key on your person starts the engine or changes “ENGINE START

STOP” switch modes.

■ Starting the engine

Vehicles with an automatic transmission

Check that the parking brake is set.

Check that the shift lever is set in P.

If the shift lever is not set in P, the engine may not be started.

(→P. 181)

Firmly depress the brake pedal.

The smart entry & start system indicator light (green) will turn on.

If the indicator light does not turn on, the engine cannot be

started.

Press the “ENGINE START

STOP” switch.

The engine will crank until it

starts or for up to 10 seconds,

whichever is less.

Continue depressing the brake

pedal until the engine is com-

pletely started.

The engine can be started

from any “ENGINE START

STOP” switch mode.

STEP

86_OM_EE_OM18058E.book 169 ページ２０１５年３月１７日　火曜日　午前１１時３１分