Operation Manual

181
2-1. Driving procedures
2
When driving
FT86_EE
Automatic transmission
∗
Select a shift position appropriate for the driving conditions.
■ Shifting the shift lever
Vehicles without a smart entry & start system
While the engine switch is in the “ON” position, move the
shift lever with the brake pedal depressed.
When shifting the shift lever between P and D, make sure that the
vehicle is completely stopped.
Vehicles with a smart entry & start system
While the “ENGINE START STOP” switch is in IGNITION
ON mode, move the shift lever with the brake pedal
depressed.
When shifting the shift lever between P and D, make sure that the
vehicle is completely stopped.
∗: If equipped
86_OM_EE_OM18058E.book 181 ページ ２０１５年３月１７日 火曜日 午前１１時３１分