Operation Manual

222
2-4. Using other driving systems
FT86_EE
■ Cruise control can be set when
Vehicles with an automatic transmission
● The shift lever is in D or M and the vehicle is in the 2
nd
gear or higher.
● Vehicle speed is above approximately 40 km/h (25 mph).
Vehicles with a manual transmission
● The vehicle is in the 2
nd
gear or higher.
● Vehicle speed is above approximately 40 km/h (25 mph).
■ Canceling and resuming the constant speed control
Pulling the lever toward you
cancels the constant speed
control.
The speed setting is also can-
celed when the brakes are
applied or the clutch pedal
(manual transmission only) is
depressed.
Pushing the lever up
resumes the constant
speed control.
Resuming is available when
the vehicle speed is more than
approximately 32 km/h (20
mph).
86_OM_EE_OM18058E.book 222 ページ ２０１５年３月１７日 火曜日 午前１１時３１分