Operation Manual

304
4-3. Do-it-yourself maintenance
FT86_EE
■ Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.
Make sure to check the oil type and prepare the items needed before
adding oil.
Remove the oil filler cap by turning it counterclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise.
Engine oil
selection
→P. 438
Oil quantity
(Low → Full)
1.0 L (1.1 qt., 0.9 Imp. qt.)
Items
Clean funnel
STEP 1
STEP 2
STEP 3
86_OM_EE_OM18058E.book 304 ページ ２０１５年３月１７日 火曜日 午前１１時３１分