Operation Manual

317

4-3. Do-it-yourself maintenance

Maintenance and care

FT86_EE

■ How to initialize the tire pressure warning system

Park the vehicle in a safe place and turn the “ENGINE START

STOP” switch (vehicles with a smart entry & start system) or

the engine switch (vehicles without a smart entry & start sys-

tem) off.

Initialization cannot be performed while the vehicle is moving.

Adjust the tire inflation pressure to the specified cold tire infla-

tion pressure level. (→P. 445)

Make sure to adjust the tire pressure to the specified cold tire infla-

tion pressure level. The tire pressure warning system will operate

based on this pressure level.

Turn the “ENGINE START STOP” switch to IGNITION ON

mode (vehicles with a smart entry & start system) or engine

switch to the “ON” position (vehicles without a smart entry &

start system).

Press and hold the tire pressure

warning reset switch until the tire

pressure warning light blinks

slowly 3 times.

STEP

86_OM_EE_OM18058E.book 317 ページ２０１５年３月１７日　火曜日　午前１１時３１分