Operation Manual

347
4-3. Do-it-yourself maintenance
4
Maintenance and care
FT86_EE
Turn and secure the bulb base.
Shake the bulb base gently to
check that it is not loose, turn the
headlight low beams on once and
visually confirm that no light is
leaking through the mounting.
■ Headlight high beams (vehicles with halogen bulbs)
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.
Install a new bulb.
Align the 3 tabs on the light bulb
with the mounting, and insert.
STEP 4
STEP 1
STEP 2
STEP 3
86_OM_EE_OM18058E.book 347 ページ ２０１５年３月１７日 火曜日 午前１１時３１分