Operation Manual

390
5-2. Steps to take in an emergency
FT86_EE
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
120 N•m (12.2 kgf•m, 89 ft•lbf)
Stow the flat tire, tire jack and all tools.
STEP 4
■ After completing the tire change
The tire pressure warning system must be reset. (→P. 316)
■ Storing the tire
STEP 5
Always install the center fastener as
shown in the illustration.
86_OM_EE_OM18058E.book 390 ページ ２０１５年３月１７日 火曜日 午前１１時３１分