Operation Manual

5
399
5-2. Steps to take in an emergency
When trouble arises
FT86_EE
Emergency repair method
Shake the sealant bottle up and down several times and
remove the cap of the sealant bottle.
Connect the injection hose by
screwing onto the sealant. As it
is screwed in, the aluminum seal
on the bottle will be torn.
Position the nail or screw that
has punctured the tire at the bot-
tom, in contact with the ground.
Remove the cap from the valve.
Bring the protruding part of the
valve core tool into contact with
the valve to discharge air.
STEP 1
STEP 2
Injection
hose
Sealant
STEP 3
Valve
Cap
STEP 4
Valve
Protruding part
Valve core
tool
86_OM_EE_OM18058E.book 399 ページ ２０１５年３月１７日 火曜日 午前１１時３１分