Operation Manual

400
5-2. Steps to take in an emergency
FT86_EE
Pull out the valve core by turning
it counterclockwise using the
valve core tool.
Remove the plug from the injec-
tion hose.
Connect the injection hose to the
valve.
Inject the sealant that is in the
bottle. Hold and tilt the bottle,
then squeeze sealant out of the
bottle as shown.
STEP 5
Valve core
STEP 6
Plug
Injection
hose
STEP 7
Valve
Injection
hose
STEP 8
86_OM_EE_OM18058E.book 400 ページ ２０１５年３月１７日 火曜日 午前１１時３１分