Operation Manual
58
1-2. Opening, closing and locking the doors and trunk
FT86_EE
■ Window open/close function linked to door operation
In order to make opening and closing the doors easier, completely closed
windows are linked to door operations. Therefore, when a door is opened, its
window opens slightly. When a door is closed, its window closes completely.
However, if the battery has discharged or is disconnected, this function will
not operate. (→P. 424)
■ If a wrong key is used (vehicles with a double locking system)
The key cylinder rotates freely to isolate inside mechanism.
■ If the smart entry & start system has been deactivated in a customized
setting (vehicles with a smart entry & start system)
Use the wireless remote control or mechanical key. (→P. 51, 416)
CAUTION
■ To prevent an accident
Observe the following precautions while driving the vehicle.
Failure to do so may result in a door opening and an occupant falling out,
resulting in death or serious injury.
● Always use a seat belt.
● Ensure that both side doors are properly closed.
● Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers are thrown out of the vehi-
cle and it may result in serious injury or death.
86_OM_EE_OM18058E.book 58 ページ 2015年3月17日 火曜日 午前11時31分