Operation Manual

77
EN
8 Lightly place your hands on the fabric to guide it
and sew.
* Lightly step on the foot controller to begin sewing.
* Release the foot controller to stop sewing.
In OEKAKI mode, the fabric can be moved with the presser foot
lowered.
* To change the sewing speed, press the (function) button until the (sewing speed) LED lights
up, and then change the setting.
* While the stitch width can be adjusted by pressing the foot controller, the maximum stitch width can also be
changed. To change the maximum setting, press the (function) button until the (stitch width)
LED lights up, and then change the setting.
Tip
Caution
Do not touch moving parts such as the
needle.
Doing so could cause injuries.
Caution
In OEKAKI mode, feed the fabric according to the sewing speed.
Feeding the fabric faster than the sewing speed could break the needle and cause injuries.
Do not pull the fabric excessively while sewing.
Doing so could break the needle and cause injuries.
Do not touch the top of
the presser foot.