Operation Manual

95
EN
If the above countermeasures do not solve the problem, contact the service center as described in your warranty.
When calling for service, please note the MODEL and SERIES that are inscribed on the back of your sewing
machine.
Unable to
adjust stitch
width in
OEKAKI mode
The foot controller is disconnected. Connect the foot controller. 18
The OEKAKI (free-motion embroidering)
button is not lit.
Press the OEKAKI button so that it
lights up.
76
Stitch number A3 is selected in OEKAKI
mode.
Select stitch number A1 or A2.
(A3 is the tacking stitch.)
76
From the operation panel, the stitch
width has been set to “0” or a low
setting.
Increase the stitch width setting, or
select an appropriate setting.
77, 78
Trouble Cause Countermeasure Page