Operation Manual

• Pulling up the lower thread

Pull up the upper thread and the loop of

the lower thread will come out.

Pull out this lower thread.

Align the upper thread and lower thread,

and thread through the groove of the

presser foot.

Pull back about 15 cm.

Hold the end of the thread, turn the

handwheel towards yourself for one

full turn, and stop when the needle is

at its highest position.

Note: Always turn the handwheel towards yourself (in the direction of

the arrow). If you turn it in the wrong direction it could tangle the

thread.

Note: If the thread is tight the lower thread will not come out, so hold the

thread loosely.

Upper thread

Lower thread

15cm

Sewing preparations

Handwheel