Operation Manual

26
Thread cutter on the presser bar
Line up two threads and cut with the
thread cutter on the presser bar.
Reverse sewing is performed while
pressing down the reverse sewing lever.
• Stitch 1 cm from the edge of the fabric
to prevent unraveling at the start of
sewing.
• Sew 3 to 4 reverse stitches at the end
of sewing.
Note: Remove your fi nger from the
reverse sewing lever to return
to forward direction sewing.
Reverse sewing
Reverse sewing is performed at the beginning and the end of sewing to prevent the
thread from unraveling.
Reverse sewing lever
Thread cutter