Operation Manual

31
• Buttonhole sewing
Caution
Remove the power plug from the outlet when
changing the presser foot.
Not doing so could cause an injury.
Buttonhole sewing to match the size of the button is possible.
For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better
buttonhole fi nish.
1
1234
Buttonhole foot
2
Center line
Buttonhole
size
3mm
Button thickness
(Button diameter+button thickness+3mm)
Set the buttonhole size and mark
lines on the fabric.
3
Division line
Start line
of sewing
Guide line
Align the buttonhole foot division line
closest to you with the guide line, and
lower the presser foot to the start line of
sewing on the fabric.
Change to the buttonhole foot.
(Refer to “Changing the presser foot”, p19.)
Start line
of sewing
Sewing
Center line