Pictorial index Search by illustration 1 For safety and security Make sure to read through them 2 Instrument cluster How to read the gauges and meters, the variety of warning lights and indicators, etc. 3 Operation of each component Opening and closing the doors and windows, adjustment before driving, etc. 4 Driving Operations and advice which are necessary for driving 5 Audio system Operating the audio system 6 Interior features Usage of the interior features, etc.
TABLE OF CONTENTS For your information .......................8 Reading this manual.....................12 How to search ..............................13 Pictorial index ...............................14 1 For safety and security 1-1. For safe use Before driving.......................34 For safety drive ....................36 Seat belts.............................38 SRS airbags.........................43 Airbag manual on-off system ...............................55 Safety information for children .....
4 Driving 4-1. Before driving Driving the vehicle .............174 Cargo and luggage ............187 Trailer towing .....................188 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ............................196 Engine (ignition) switch (vehicles with a smart entry & start system)........199 Multidrive ...........................209 Multi-mode Manual Transmission ...................213 Manual transmission..........218 Turn signal lever ...........
TABLE OF CONTENTS 5 Interior features 5-1. Basic Operations Audio system types............328 Steering wheel audio switches...........................330 AUX port/USB port.............331 5-2. Using the audio system Optimal use of the audio system .............................332 5-3. Using the radio Radio operation .................334 5-4. Playing audio CDs and MP3/WMA discs CD player operation...........338 5-5. Using an external device Listening to an iPod ...........
6 Maintenance and care 7 When trouble arises 6-1. Using the air conditioning system and defogger Manual air conditioning system .............................392 Automatic air conditioning system .............................399 Power heater .....................409 Seat heaters ......................411 7-1. Maintenance and care Cleaning and protecting the vehicle exterior.......... 428 Cleaning and protecting the vehicle interior........... 432 7-2. Maintenance Maintenance requirements ..............
TABLE OF CONTENTS 8 Vehicle specifications 8-1. Essential information Emergency flashers ...........502 If your vehicle has to be stopped in an emergency.......................503 8-2. Steps to take in an emergency If your vehicle needs to be towed ..........................505 If you think something is wrong ...........................511 Fuel pump shut off system .............................512 If a warning light turns on or a warning buzzer sounds .............................
9 Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.)...........592 Fuel information .................609 1 9-2. Customization Customizable features .......611 2 9-3. Initialization Items to initialize ................618 3 Index 4 What to do if... (Troubleshooting) .....................620 Alphabetical index ......................
For your information Main Owner’s Manual Please note that this manual applies to all models and all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice.
Installation of an RF-transmitter system The installation of an RF-transmitter system in your vehicle could affect electronic systems such as: ●Multiport fuel injection system/sequential multiport fuel injection system ●Cruise control system (if equipped) ●Anti-lock brake system ●SRS airbag system ●Seat belt pretensioner system Be sure to check with any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for precautionary measures or special instructions regarding ins
WARNING ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to operate your vehicle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury. Defensive driving: Always drive defensively. Anticipate mistakes that other drivers or pedestrians might make and be ready to avoid accidents.
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures. Follow the steps in numerical order. Indicates the action (pushing, turning, etc.) used to operate switches and other devices. Indicates the outcome of an operation (e.g. a lid opens).
How to search ■ Searching by name • Alphabetical index ...... P. 626 ■ Searching by installation position • Pictorial index............... P. 14 ■ Searching by symptom or sound • What to do if... (Troubleshooting) ....... P. 620 ■ Searching by title • Table of contents ............ P.
Pictorial index Pictorial index ■ Exterior 1 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 127 Locking/unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 127 Opening/closing the door glasses . . . . . . . . . . . . . . . . . . . . . P. 169 Locking/unlocking by using the mechanical key*1 . . . . . . . . . P. 575 Warning lights/warning messages*2 . . . . . . . . . . . . . . . . P. 517, 526 2 Trunk. . . . . . . . . . . . . . .
Pictorial index 4 Windshield wipers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 232 Precautions against winter season . . . . . . . . . . . . . . . . . . . . . P. 323 Precautions against car wash . . . . . . . . . . . . . . . . . . . . . . . . . P. 430 5 Fuel filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 237 Refueling method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 237 Fuel type/fuel tank capacity . . . . . . .
Pictorial index ■ Instrument panel (left-hand drive vehicles) 1 Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 196, 199 Starting the engine/changing the position or modes . . . . P. 196, 199 Emergency stop of the engine. . . . . . . . . . . . . . . . . . . . . . . . . P. 503 When the engine will not start . . . . . . . . . . . . . . . . . . . . . . . . . P. 571 Warning messages*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 526 2 Shift lever . . .
Pictorial index 4 Drive monitor display*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 92 Multi-information display*1 . . . . . . . . . . . . . . . . . . . . . . . . . P. 101 When the warning messages are displayed . . . . . . . . . . . . . . P. 526 5 Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 223 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 223 Precautions against winter season . . . . . . . . . . .
Pictorial index ■ Switches (left-hand drive vehicles) X Type A X Type B X Type C
Pictorial index 1 Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 166 2 Headlight leveling dial* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 227 3 Windshield wiper de-icer* . . . . . . . . . . . . . . . . . . . . . . P. 395, 404 4 Power heater switch* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 409 5 PCS (Pre-Crash Safety system) switch* . . . . . . . . . . . . . . . P. 246 6 Simple-IPA switch* . . . . . . . . . . . . . . . . . . . . . . .
Pictorial index X Type A X Type B X Type C X TypeD 1 Audio remote control switches*2 . . . . . . . . . . . . . . . . . . . . P. 330 2 Paddle shift switches*1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 214 3 Telephone switches*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 367 4 Speed limiter switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 290 5 “DISP” switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index X Type A X Type B 1 Sport mode switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 210 2 VSC OFF switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 315, 316 3 Stop & Start cancel switch*1 . . . . . . . . . . . . . . . . . . . . . . . . P. 275 4 “Es” switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 214 5 Seat heater switches*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index ■ Interior (left-hand drive vehicles) 1 SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 43 2 Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 34 3 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 155 4 Head restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 159 5 Seat belts . . . . . . . . . . . . . . . . . . . . . . . .
Pictorial index 1 Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 163 2 Sun visors*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 423 3 Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 423 4 Vanity lights*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 414 5 Interior light/personal lights . . . . . . . . . . . . . . . . . . . . . P. 414, 415 6 Auxiliary boxes . . . .
Pictorial index ■ Instrument panel (right-hand drive vehicles) 1 Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Starting the engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Emergency stop of the engine. . . . . . . . . . . . . . . . . . . . . . . . . When the engine will not start . . . . . . . . . . . . . . . . . . . . . . . . . P. 196 P. 196 P. 503 P. 571 2 Shift lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pictorial index 4 Drive monitor display*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 92 Multi-information display*1 . . . . . . . . . . . . . . . . . . . . . . . . . P. 101 When the warning messages are displayed . . . . . . . . . . . . . . P. 526 5 Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 223 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 223 Precautions against winter season . . . . . . . . . . .
Pictorial index ■ Switches (right-hand drive vehicles)
Pictorial index 1 PCS (Pre-Crash Safety system) switch* . . . . . . . . . . . . . . . P. 246 2 Headlight leveling dial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 227 3 Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 166 4 Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 169 5 Door lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 130 6 Power window switches* . . . . . . . . . . . . . . . . .
Pictorial index X Type A X Type B X Type C X TypeD 1 Audio remote control switches*2 . . . . . . . . . . . . . . . . . . . . P. 330 2 Telephone switches*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 367 3 Speed limiter switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 290 4 “DISP” switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 96 5 Cruise control switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 1 Sport mode switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 210 2 VSC OFF switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 315, 316 3 Stop & Start cancel switch*1 . . . . . . . . . . . . . . . . . . . . . . . . P. 275 * 2: *1: If equipped For vehicles with navigation/multimedia system, refer to “Navigation and multimedia system Owner’s manual”.
Pictorial index ■ Interior (right-hand drive vehicles) 1 SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 43 2 Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 34 3 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 155 4 Head restraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 159 5 Seat belts . . . . . . . . . . . . . . . . . . . . . . . .
Pictorial index 1 Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 163 2 Sun visors*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 423 3 Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 423 4 Vanity lights*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 414 5 Interior light/personal lights . . . . . . . . . . . . . . . . . . . . . P. 414, 415 6 Auxiliary boxes . . . .
Pictorial index
For safety and security 1 1-1. For safe use Before driving.......................34 For safety drive ....................36 Seat belts.............................38 SRS airbags.........................43 Airbag manual on-off system ...............................55 Safety information for children ..............................57 Child restraint systems ........58 Installing child restraints ......67 Exhaust gas precautions .....76 1-2. Theft deterrent system Engine immobilizer system .................
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. 1 Insert the retaining hooks (clips) into the floor mat eyelets. 2 Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the marks. * The shape of the retaining hooks (clips) may differ from that shown in the illustration.
1-1. For safe use 35 WARNING ● Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor. ● With the engine stopped and the shift lever in P (Multidrive) or N (multi-mode manual and manual transmissions), fully depress each pedal to the floor to make sure it does not interfere with the floor mat. 1 For safety and security Observe the following precautions.
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture 1 Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer. (→P. 155) 2 Adjust the seat so that you can depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel. (→P.
1-1. For safe use 37 Adjusting the mirrors Make sure that you can see backward clearly by adjusting the inside and outside rear view mirrors properly. (→P. 163, 166) WARNING 1 For safety and security Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback.
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.
1-1. For safe use 39 Adjusting the seat belt shoulder anchor height (front seats) 1 Push the seat belt shoulder anchor down while pressing the release button. 2 Push the seat belt shoulder anchor up. Seat belt pretensioners (front seats) The pretensioners help the seat belts to quickly restrain the occupants by retracting the seat belts when the vehicle is subjected to certain types of severe frontal or side collision.
1-1. For safe use ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully. ■ Child seat belt usage The seat belts of your vehicle were principally designed for persons of adult size. ●Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. (→P.
1-1. For safe use 41 WARNING Obtain medical advice and wear the seat belt in the proper way. (→P. 38) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occupants, extending the shoulder belt completely over the shoulder and avoiding belt contact with the rounding of the abdominal area.
1-1. For safe use WARNING ■ People suffering illness Obtain medical advice and wear the seat belt in the proper way. (→P. 38) ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.
1-1. For safe use 43 SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
1-1. For safe use SRS airbag system components 1 SRS warning light 8 Driver’s knee airbag 2 Side impact sensors (rear) 9 Airbag sensor assembly 3 Curtain shield airbags 10 Front impact sensors 4 Driver airbag 11 Airbag manual on-off switch 5 Side airbags 12 Front passenger airbag 6 Side impact sensors (front) 13 “PASSENGER AIR BAG” indi- 7 Seat belt pretensioners and cator force limiters The main SRS airbag system components are shown above.
1-1. For safe use 45 WARNING 1 For safety and security ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts. ● The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag.
1-1. For safe use WARNING ■ SRS airbag precautions ● Do not sit on the edge of the seat or lean against the dashboard. ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not allow the front seat occupants to hold items on their knees. ● Do not lean against the door, the roof side rail or the front, side and rear pillars.
1-1. For safe use 47 WARNING ■ SRS airbag precautions ● Do not attach anything to areas such as the door, windshield glass, side door glass, front or rear pillar, roof side rail and assist grip. (Except for the speed limit label →P. 540, 545) ● Vehicles without a smart entry & start system: Do not attach any heavy, sharp or hard objects such as keys and accessories to the key.
1-1. For safe use WARNING ■ SRS airbag precautions ● Do not hang coat hangers or other hard objects on the coat hooks. All of these items could become projectiles and may cause death or serious injury, should the SRS curtain shield airbags deploy. ● If a vinyl cover is put on the area where the SRS driver’s knee airbag will deploy, be sure to remove it. ● Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags.
1-1. For safe use 49 WARNING 1 For safety and security ■ Modification and disposal of SRS airbag system components Do not dispose of your vehicle or perform any of the following modifications without consulting any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury.
1-1. For safe use ■ If the SRS airbags deploy (inflate) ●Slight abrasions, burns, bruising etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ●A loud noise and white powder will be emitted. ●Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars, and roof side rails, may be hot for several minutes. The airbag itself may also be hot. ●The windshield may crack.
1-1. For safe use 51 ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
1-1. For safe use ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
1-1. For safe use 53 ■ When to contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional In the following cases, the vehicle will require inspection and/or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ●Any of the SRS airbags have been inflated.
1-1. For safe use ●The portion of the front pillars, rear pillars or roof side rail garnishes (padding) containing the curtain shield airbags inside is scratched, cracked, or otherwise damaged.
1-1. For safe use 55 Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbag when using a child restraint system on the front passenger seat. 1 “PASSENGER AIR BAG” indiVehicles without a smart entry & start system: The “PASSENGER AIR BAG” and “ON” indicator light turns on when the airbag system is on (Only when the engine switch is in the “ON” position).
1-1. For safe use Deactivating the front seat passenger airbag Vehicles without a smart entry & start system: Insert the key into the cylinder and turn it to the “OFF” position. The “OFF” indicator light turns on (only when the engine switch is in the “ON” position). Vehicles with a smart entry & start system: Insert the mechanical key into the cylinder and turn it to the “OFF” position. The “OFF” indicator light turns on (only when the engine switch is in IGNITION ON mode).
1-1. For safe use 57 Safety information for children Observe the following precautions when children are in the vehicle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. WARNING Never leave children unattended in the vehicle, and never allow children to have or use the key. Children may be able to start the vehicle or shift the vehicle into neutral.
1-1. For safe use Child restraint systems Toyota strongly urges the use of child restraint systems. Points to remember Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child. ● For installation details, follow the instructions provided with the child restraint system.
1-1. For safe use 59 Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation ECE No.44: Group 0: Up to 10 kg (22 lb.) (0 - 9 months) Group 0+: Up to 13 kg (28 lb.) (0 - 2 years) Group I: 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) 1 Group II: 15 to 25 kg (34 to 55 lb.
1-1. For safe use Child restraint system suitability for various seating positions Information provided in the table shows your child restraint system suitability for various seating positions. Seating position Front passenger seat Airbag manual on-off switch Rear seat ON OFF Outboard Center 0 Up to 10 kg (22 lb.) (0 - 9 months) X Never put U*1 L1*1 U L1 X 0+ Up to 13 kg (28 lb.
1-1. For safe use 61 Key of letters inserted in the above table: U: Suitable for “universal” category child restraint system approved for the use in this mass group. UF: Suitable for forward-facing “universal” category child restraint system approved for the use in this mass group. L1: Suitable for “TOYOTA G 0+, BABY SAFE PLUS with SEAT BELT FIXATION, BASE PLATFORM” (0 to 13 kg [0 to 28 lb.]) approved for the use in this mass group. X: * Not suitable seat position for children in this mass group.
1-1. For safe use Child restraint system suitability for various seating positions (with ISOFIX rigid anchors) Information provided in the table shows your child restraint system suitability for various seating positions. Mass groups Carrycot 0 Up to 10 kg (22 lb.) (0 - 9 months) 0+ Up to 13 kg (28 lb.) (0 - 2 years) I 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) II, III 15 to 36 kg (34 to 79 lb.
1-1. For safe use 63 (1) For the child restraint system which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the car manufacturer shall indicate the vehicle specific ISOFIX child restraint system(s) recommended for each position. Key of letters inserted in the above table: IUF: Suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this mass group.
1-1. For safe use ■ When installing a child restraint system on the front passenger seat When you have to use a child restraint system on the front passenger seat, adjust the following: ●The seatback to the most upright position. If the child restraint system interferes with the seatback when latching the child restraint system into the support base, adjust the seatback rearward until there is no interference. ●Remove the head restraint. ●Move the seat as far back as possible.
1-1. For safe use 65 WARNING 1 For safety and security ■ Using a child restraint system The use of a child restraint system not suitable for the vehicle may not properly secure the infant or child. It may result in death or serious injury (in the event of sudden braking or an accident).
1-1. For safe use WARNING ■ Child restraint precautions ● Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop or accident. ■ When children are in the vehicle Do not allow children to play with the seat belt.
1-1. For safe use Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using a seat belt or ISOFIX rigid anchors. Attach the top strap when installing a child restraint. For safety and security Seat belts (An ELR belt requires a locking clip) ISOFIX rigid anchors (ISOFIX child restraint system) Lower anchors are provided for the outboard rear seats.
1-1. For safe use Installing child restraints using a seat belt ■ Rear-facing Baby seat/child seat 1 Place the child restraint sys- tem on the rear seat facing the rear of the vehicle. 2 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. 3 Install a locking clip near the tab of the lap and shoulder belt by inserting the lap and shoulder webbing through the recesses of the locking clip. Buckle the belt again.
1-1. For safe use 69 ■ Forward-facing Child seat 1 Place the child restraint sys- tem on the seat facing the front of the vehicle. 2 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. 3 Install a locking clip near the tab of the lap and shoulder belt by inserting the lap and shoulder webbing through the recesses of the locking clip. Buckle the belt again.
1-1. For safe use ■ Junior seat 1 Place the child restraint sys- tem on the seat facing the front of the vehicle. 2 Sit the child in the child restraint system. Fit the seat belt to the child restraint system according to the manufacturer's instructions and insert the plate into the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over the child's shoulder and that the lap belt is as low as possible. (→P.
1-1. For safe use 71 Installation with ISOFIX rigid anchor 1 Widen the gap between the seat cushion and seatback slightly. 2 Latch the buckles onto the exclusive fixing bars. If the child restraint has a top strap, the top strap should be latched onto the anchor bracket.
1-1. For safe use Child restraint systems with a top strap 1 Adjust the head restraint to the downmost position. (→P. 159) 2 Secure the child restraint sys- tem using the seat belt or ISOFIX rigid anchors. 3 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is securely latched.
1-1. For safe use ■ When installing a child restraint system You need a locking clip to install the child restraint system. Follow the instructions provided by the manufacturer of the system. If your child restraint system does not provide a locking clip, you can purchase the following item from any authorized Toyota dealer or repairer, or another duly qualified and equipped professional: Locking clip for child restraint system (Part No.
1-1. For safe use WARNING ■ When installing a child restraint system ● Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on. (→P. 55) The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event of an accident. ● There is a label(s) on the passenger side sun visor, indicating it is forbidden to attach a rear-facing child restraint system to the front passenger seat.
1-1. For safe use 75 WARNING 1 For safety and security ■ When installing a child restraint system ● If child restraint system regulations exist in the country where you reside, please contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for the child restraint system installation. ● When a junior seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder.
1-1. For safe use Exhaust gas precautions Harmful substance to the human body is included in exhaust gases if inhaled. WARNING Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard. ■ Important points while driving ● Keep the trunk closed.
1-2. Theft deterrent system 77 Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. 1 This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system.
1-2.
1-2.
1-2.
1-2.
1-2. Theft deterrent system 83 1 For safety and security NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
1-2.
Instrument cluster 2 2. Instrument cluster Warning lights and indicators ...........................86 Gauges and meters .............92 Drive monitor display ...........95 Multi-information display ....101 Fuel consumption information.......................
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all warning lights and indicators illuminated.
2. Instrument cluster 87 Warning lights Warning lights inform the driver of malfunctions in the indicated vehicle’s systems. *1 *1, 3 Charging system warning light (→P. 513) Low engine oil pressure warning light (→P. 513) *1, 3 *1, 3 *3, 5 Automatic headlight leveling system warning light (→P. 515) LED headlight warning light (→P. 515) Cruise control indicator light (→P. 516) (Yellow) *1, 3 High engine coolant temperature warning light (→P.
2. Instrument cluster *6 *1, 3 *1, 3 *1, 3 Rear passengers’ seat belt reminder lights (→P. 517) *3 *1 Low engine oil level warning light (→P. 517) Engine oil change reminder light (→P. 518) Master warning light (→P. 518) *1, 3 *3, 5 Low windshield washer fluid warning light (→P. 517) Tire pressure warning light (→P. 519) DPF system warning light (→P. 518) Speed limiter indicator (→P.
2. Instrument cluster 89 Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator (→P. 222) Headlight high beam indicator (→P. 224) Automatic High Beam indicator (→P. 264) *3 *3 Slip indicator (→P. 315, 321) Tail light indicator (→P. 224) Smart entry & start system indicator (→P. 199) (Green) *3 Front fog light indicator (→P. 230) *3 Speed limiter indicator (→P. 290) (Green) Rear fog light indicator (→P.
2. Instrument cluster *3 *1, 3, 8 *1, 8 *1, 6 Simple-IPA indicator (→P. 299) PCS warning light (→P. 246) “TRC OFF” indicator (→P. 315) *6 *1, 2, 3, 5 *3, 7 Security indicator (→P. 77) Eco Driving Indicator Light (→P. 99, 109) Low outside temperature indicator (→P. 92) “PASSENGER AIR BAG” indicator (→P.
2. Instrument cluster 91 WARNING ■ If a safety system warning light does not come on Should a safety system light such as the ABS and SRS warning lights not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately if this occurs.
2.
2. Instrument cluster 93 1 Tachometer Displays the engine speed in revolutions per minute. 2 Speedometer Displays the vehicle speed. 3 Outside temperature Displays the outside temperature within the range of -40°C (-40°F) to 50°C (122°F). Drive monitor display: If the outside temperature is 3°C (37°F) or lower, the temperature display flashes 10 times, and then illuminates. Multi-information display: Low outside temperature indicator comes on when the ambient temperature is 3°C (37°F) or lower. →P.
2. Instrument cluster ■ The meters and display illuminate when X Vehicles without a smart entry & start system The engine switch is in the “ON” position. X Vehicles with a smart entry & start system The engine switch is in IGNITION ON mode. ■ Outside temperature display ●In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
2. Instrument cluster 95 Drive monitor display∗ Display content The drive monitor display presents the driver with a variety of drivingrelated data, such as the current outside temperature. ● Engine coolant temperature gauge (→P. 92) ● Outside temperature (→P. 92) ● Shift position and gear position indicator (if equipped) (→P. 209, 213) ● Trip information/Drive information/Meter light control (→P.
2. Instrument cluster Trip information/Drive information/Meter light control ◆ Changing the display To change the displayed item, press the display change switch or the “DISP” switch. Each time the switch is pressed, the displayed item will be changed. ◆ Display items ■ Odometer “ ” will be displayed. Displays the total distance the vehicle has been driven. ■ Trip meter A/trip meter B “ ”/“ ” will be displayed. Displays the distance the vehicle has been driven since the meter was last reset.
2. Instrument cluster 97 ■ Average fuel consumption “ ” will be displayed. Displays the average fuel consumption since the function was reset. • To reset, display the average fuel consumption and press and hold the display change switch or the “DISP” switch. • Vehicles with a Multidrive: When the display is changed to the average fuel economy display, the Eco Driving Indicator zone display (→P. 99) will be displayed instead of the engine coolant temperature gauge.
2. Instrument cluster Display customization The following display items can be customized: ◆ Customizable items ■ Eco Driving Indicator Light (if equipped) Can be enabled or disabled ■ Stop & Start system operation time pop-up display (if equipped) Current Stop & Start system operation time can be enabled or disabled.
2. Instrument cluster 99 ■ Eco Driving Indicator (if equipped) 1 Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off. 2 Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
2. Instrument cluster WARNING ■ Caution for use while driving ● When operating the drive monitor display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the drive monitor display while driving as you may fail to see pedestrians, objects on the road, etc. ahead of the vehicle. ■ The display at low temperatures Allow the interior of the vehicle to warm up before using the display.
2. Instrument cluster 101 Multi-information display∗ Display content The multi-information display presents the driver with a variety of driving-related data, such as the current outside temperature. The multiinformation display can also be used to change the display settings and other settings. ● Outside temperature (→P. 92) ● Shift position and gear position indicator (if equipped) (→P.
2. Instrument cluster ● Menu icons (→P. 104) Select a menu icon to display its content. To display the menu icons, press the steering wheel. or switch on the Drive information (→P. 105) Select to display various drive data. Navigation system-linked display (if equipped) Select to display the following navigation system-linked information.
2. Instrument cluster 103 Trip information ◆ Changing the display To change the displayed item, press the “TRIP” switch. Each time the switch is pressed, the displayed item will be changed. 2 ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter A/trip meter B Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently.
2. Instrument cluster Menu icons ◆ Operating the meter control switches The multi-information display is operated using the meter control switches.
2. Instrument cluster 105 ◆ Drive information ■ Drive information 1/Drive information 2/Drive information 3 Displayed items (listed below) can be changed on the settings display. (→P.
2.
2. Instrument cluster 107 ◆ Settings display ■ LDA (Lane Departure Alert) warning sensitivity (if equipped) LDA warning sensitivity can be set to 2 different levels. Toyota parking assist-sensor (if equipped) ■ Select to activate/deactivate the Toyota parking assist-sensor system. RSA (Road Sign Assist) (if equipped) ■ Select to activate/deactivate the RSA system. Select to adjust the brightness of the meters when in night mode*. *: Night mode: →P.
2. Instrument cluster ● Units Select to change the units of measure displayed on the multiinformation display. ● Eco Driving Indicator Light (if equipped) Select to activate/deactivate the Eco Driving Indicator Light. ● Drive information 1/Drive information 2/Drive information 3 Select to select up to 2 items that will be displayed on the Drive information 1 screen, Drive information 2 screen and Drive information 3 screen (if equipped) respectively. (→P.
2. Instrument cluster 109 ■ Eco Driving Indicator (if equipped) 1 Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), the Eco Driving Indicator Light will turn on. When the acceleration exceeds the Zone of Eco driving, or when the vehicle is stopped, the light turns off. 2 Eco Driving Indicator Zone Display Suggests the Zone of Eco driving with current Eco driving ratio based on acceleration.
2. Instrument cluster ■ Brightness of the meters (day mode and night mode) ●The brightness of the meters is changed between day mode and night mode.
2. Instrument cluster 111 WARNING NOTICE ■ While setting up the display To prevent battery discharge, ensure that the engine is running while setting up the display features. 2 Instrument cluster ■ Caution for use while driving ● When operating the multi-information display while driving, pay extra attention to the safety of the area around the vehicle. ● Do not look continuously at the multi-information display while driving as you may fail to see pedestrians, objects on the road, etc.
2. Instrument cluster Fuel consumption information∗ Fuel consumption information can be displayed on the navigation/multimedia system.
2. Instrument cluster 113 Trip information 1 Press the “CAR” button on the navigation/multimedia system. 2 2 Select “Trip information”. 1 Average vehicle speed since the engine was started. 2 Cruising range (→P. 114) 3 Fuel consumption in the past 15 minutes 4 Elapsed time since engine was started.
2. Instrument cluster Past record 1 Press the “CAR” button on the navigation/multimedia system. 2 Select “Past record”. ■ Past record screen 1 Best recorded fuel consump- tion 2 Previous fuel consumption record 3 Average fuel consumption 4 Updating the average fuel consumption data 5 Resetting the past record data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
Operation of each component 3 3-1. Key information Keys...................................116 3-2. Opening, closing and locking the doors Doors .................................127 Trunk..................................133 Smart entry & start system .....................138 3-3. Adjusting the seats Front seats.........................155 Rear seats .........................156 Head restraints ..................159 3-4. Adjusting the steering wheel and mirrors Steering wheel ...................
3-1. Key information Keys The keys The following keys are provided with the vehicle. X Type A X Type C X Type B 1 Electronic keys • Operating the smart entry & start system (→P. 138) • Operating the wireless remote control function (→P.
3-1. Key information 117 Wireless remote control X Vehicles without a smart entry & start system X Vehicles with a smart entry & start system 3 1 Locks all the doors (→P. 127) 3 Opens the trunk (→P. 134) Using the key 1 Releasing To release the key, press the button. 2 Folding To stow the key back in its case, push the key back to the stowed position while pressing the button. Operation of each component 2 Unlocks all the doors (→P.
3-1. Key information Using the mechanical key To take out the mechanical key, slide the release lever and take the key out. Release lever The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and reattempt to insert it. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key.
3-1. Key information 119 3 Operation of each component ■ Key battery depletion X Vehicles without a smart entry & start system If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 480) X Vehicles with a smart entry & start system ●The standard battery life is 1 to 2 years. ●If the battery becomes low, an alarm will sound in the cabin when the engine stops. (→P.
3-1.
3-1.
3-1.
3-1.
3-1.
3-1.
3-1. Key information NOTICE ■ To prevent key damage ● Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for long periods of time. ● Do not get the keys wet or wash them in an ultrasonic washer etc. ● Do not attach metallic or magnetic materials to the keys or place the keys close to such materials. ● Do not disassemble the keys. ● Do not attach a sticker or anything else to the surface of the electronic key and key.
3-2. Opening, closing and locking the doors 127 Doors Unlocking and locking the doors from the outside (front door handles only) ◆ Smart entry & start system (if equipped) Carry the electronic key to enable this function. 1 Grip the handle to unlock all the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked. 3 indentation on the upper part of the door handle) to lock all the doors.
3-2. Opening, closing and locking the doors ◆ Key Turning the key operates the doors as follows: X Vehicles without a smart entry & start system 1 Locks all the doors 2 Unlocks all the doors X Vehicles with a smart entry & start system The doors can also be locked and unlocked with the mechanical key. (→P. 575) ■ Operation signals The emergency flashers flash to indicate that the doors have been locked/ unlocked.
3-2. Opening, closing and locking the doors 129 ■ When the door cannot be locked by the lock sensor on the upper part of the door handle (vehicles with a smart entry & start system) If the door will not lock even when the topside sensor area is touched, try using your palm to touch the lock sensor. 3 Operation of each component ■ Door lock buzzer (vehicles with a smart entry & start system) If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously.
3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside ◆ Door lock switches (if equipped) 1 Locks all the doors 2 Unlocks all the doors ◆ Inside lock buttons 1 Locks the door 2 Unlocks the door The driver’s door and front passenger’s door can be opened by pulling the inside handle even if the lock button is in the lock position. Locking the front doors from the outside without a key 1 Move the inside lock button to the lock position.
3-2. Opening, closing and locking the doors 131 Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. 1 Unlock 2 Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
3-2.
3-2. Opening, closing and locking the doors 133 Trunk The trunk can be opened using the trunk opener, entry function (if equipped) or wireless remote control. Opening the trunk from inside the vehicle Pull the lever upward to release the trunk lid. 3 ◆ Smart entry & start system (if equipped) While carrying the electronic key, press the button on the trunk lid.
3-2. Opening, closing and locking the doors ◆ Wireless remote control X Vehicles without a entry & start system smart Press and hold the switch. ◆ Trunk opener When the doors are unlocked, raise the trunk lid while pressing the trunk opener switch.
3-2. Opening, closing and locking the doors 135 When closing the trunk Using the trunk grip, lower the trunk without applying force to the side and push the trunk down from the outside to close it. 3 Operation of each component ■ Trunk light The trunk light turns on when the trunk is opened.
3-2. Opening, closing and locking the doors WARNING ■ Caution while driving ● Keep the trunk lid closed while driving. If the trunk lid is left open, it may hit near-by objects while driving or luggage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a serious health hazard. Make sure to close the trunk lid before driving. ● Before driving the vehicle, make sure that the trunk lid is fully closed.
3-2. Opening, closing and locking the doors 137 WARNING ■ Using the trunk Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in serious injury. ● Remove any heavy loads, such as snow and ice, from the trunk lid before opening it. Failure to do so may cause the trunk lid to suddenly shut again after it is opened. ● When opening or closing the trunk lid, thoroughly check to make sure the surrounding area is safe.
3-2. Opening, closing and locking the doors Smart entry & start system∗ The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) ● Locks and unlocks the doors (→P. 127) ● Opens the trunk (→P. 133) ● Starts the engine (→P.
3-2. Opening, closing and locking the doors 139 ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) of either of the outside front door handles. (Only the doors detecting the key can be operated.) When starting the engine or changing engine switch modes The system can be operated when the electronic key is inside the vehicle.
3-2. Opening, closing and locking the doors Alarm Situation Correction procedure An attempt was made Close all of the doors to lock the vehicle while and lock the doors a door was open. again. Vehicles with a drive monitor display: An attempt was made to lock the doors using the Exterior alarm sounds smart entry & start sysonce for 5 seconds tem while the electronic key was still inside the vehicle. Retrieve the electronic key from the passenger compartment and lock the doors again.
3-2. Opening, closing and locking the doors 141 ■ Battery-saving function The battery-saving function will be activated in order to prevent the electronic key battery and the vehicle battery from being discharged while the vehicle is not in operation for a long time. ●In the following situations, the smart entry & start system may take some time to unlock the doors. • The electronic key has been left in an area of approximately 2 m (6 ft.) of the outside of the vehicle for 10 minutes or longer.
3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and engine immobilizer system from operating properly. (Ways of coping: →P.
3-2. Opening, closing and locking the doors 143 3 Operation of each component ■ Note for the entry function ●Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
3-2. Opening, closing and locking the doors ■ Note for locking the doors ●Touching the door lock sensor while wearing gloves may delay or prevent lock operation. Remove the gloves and touch the lock sensor again. ●When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times. After this, no recognition signals will be given.
3-2. Opening, closing and locking the doors 145 3 Operation of each component ■ Note for the unlocking function ●A sudden approach to the effective range or door handle may prevent the doors from being unlocked. In this case, return the door handle to the original position and check that the doors unlock before pulling the door handle again. ●Gripping the door handle when wearing a glove may not unlock the door.
3-2.
3-2.
3-2.
3-2.
3-2.
3-2.
3-2.
3-2. Opening, closing and locking the doors 153 3 ■ Caution regarding interference with electronic devices ● People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the smart entry & start system antennas. (→P. 138) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled.
3-2.
3-3. Adjusting the seats 155 Front seats Adjustment procedure 1 Seat position adjustment lever 2 Seatback angle adjustment lever 3 Vertical height adjustment lever (driver’s seat only) 3 ■ Seat adjustment ● Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt.
3-3. Adjusting the seats Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks 1 Stow the rear outside seat belt buckles and stow the rear center seat belt buckle as shown. 2 Pull the seatback lock release knob and fold the seatback down.
3-3. Adjusting the seats 157 WARNING 3 Operation of each component ■ When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not fold the seatbacks down while driving. ● Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (Multidrive) or N (multi-mode manual transmission and manual transmission). ● Do not allow anyone to sit on a folded seatback or in the trunk while driving.
3-3. Adjusting the seats WARNING ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. ● Make sure that the seatback is securely locked in position by lightly rocking it back and forth. If the seatback is not securely locked, the red marking will be visible on the seatback lock release knob. Make sure that the red marking is not visible. ● Check that the seat belts are not twisted or caught under the seat.
3-3. Adjusting the seats 159 Head restraints Head restraints are provided for all seats. Vertical adjustment 1 Up Pull the head restraints up. 2 Down Push the head restraint down while pressing the lock release button. Lock release button Pull the head restraint up while pressing the lock release button. ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
3-3. Adjusting the seats WARNING ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ● Use the head restraints designed for each respective seat. ● Adjust the head restraints to the correct position at all times. ● After adjusting the head restraints, push down on them and make sure they are locked in position. ● Do not drive with the head restraints removed.
3-4. Adjusting the steering wheel and mirrors 161 Steering wheel Adjustment procedure 1 Hold the steering wheel and push the lever down. 2 Adjust to the ideal position by After adjustment, pull the lever up to secure the steering wheel. Horn To sound the horn, press on or close to the mark. Operation of each component moving the steering wheel horizontally and vertically.
3-4. Adjusting the steering wheel and mirrors WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors 163 Inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view. Adjusting the height of rear view mirror (auto anti-glare inside rear view mirror only) The height of the rear view mirror can be adjusted to suit your driving posture. Adjust the height of the rear view mirror by moving it up and down.
3-4. Adjusting the steering wheel and mirrors X Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic function mode anti-glare On/off When the automatic anti-glare function is in ON mode, the indicator illuminates. Vehicles without a smart entry & start system: The function will set Indicator to ON mode each time the engine switch is turned to the “ON” position.
3-4. Adjusting the steering wheel and mirrors 165 WARNING Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors Outside rear view mirrors Adjustment procedure 1 To select a mirror to adjust, press the switch. 1 Left 2 Right 2 To adjust the mirror, press the switch. 1 Up 2 Right 3 Down 4 Left Folding the mirrors X Manual type Push the mirror back in the direction of the vehicle’s rear. X Power type Press the switch to fold the mirrors. Press it again to extend them to the original position.
3-4. Adjusting the steering wheel and mirrors 167 Automatically folding and extending the mirrors (if equipped) Automatic mode allows the folding or extending of the mirrors to be linked to locking/unlocking of the doors. Automatic operation can be disabled by performing the following. Turn the engine switch to off. Press and hold the switch that folds the mirrors and of the mirror angle adjustment switch at the same time for more than 2 seconds.
3-4. Adjusting the steering wheel and mirrors WARNING ■ Important points while driving Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ● Do not adjust the mirrors while driving. ● Do not drive with the mirrors folded. ● Both the driver and passenger side mirrors must be extended and properly adjusted before driving.
3-5. Opening and closing the windows 169 Power windows∗ Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: X One-touch opening/closing on driver’s window only type 1 Closing 2 One-touch closing (driver’s win- dow only)* 3 Opening 4 One-touch opening Operation of each component window only)* 3 (driver’s *: To stop the window partway, operate the switch in the opposite direction.
3-5. Opening and closing the windows ■ The power windows can be operated when X Vehicles without a smart entry & start system The engine switch is in the “ON” position. X Vehicles with a smart entry & start system The engine switch is in IGNITION ON mode. ■ Operating the power windows after turning the engine off X Vehicles without a smart entry & start system The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position.
3-5. Opening and closing the windows 171 ■ When the power window does not close normally (windows with onetouch closing function only) If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the relevant door.
3-5. Opening and closing the windows WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window.
Driving 4-1. Before driving Driving the vehicle .............174 Cargo and luggage ............187 Trailer towing .....................188 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ....................196 Engine (ignition) switch (vehicles with a smart entry & start system) ....................199 Multidrive ...........................209 Multi-mode Manual Transmission ...................213 Manual transmission..........218 Turn signal lever .....
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine →P. 196, 199 Driving X Multidrive 1 With the brake pedal depressed, shift the shift lever to D. (→P. 209) 2 Release the parking brake. (→P. 223) 3 Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle. X Multi-mode manual transmission 1 With the brake pedal depressed, shift the shift lever to E or M. (→P.
4-1. Before driving 175 Stopping X Multidrive 1 With the shift lever in D, depress the brake pedal. 2 If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P or N. (→P. 209) X Multi-mode manual transmission 1 With the shift lever in E or M, depress the brake pedal. 2 If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to N. (→P.
4-1. Before driving X Multi-mode manual transmission 1 With the shift lever in E or M, depress the brake pedal. 2 Shift the shift lever to E, M or R. (→P. 213) 3 Set the parking brake. (→P. 223) 4 Vehicles without a smart entry & start system: Turn the engine switch to the “LOCK” position to stop the engine. Vehicles with a smart entry & start system: Press the engine switch to stop the engine.
4-1. Before driving 177 Starting off on a steep uphill X Multidrive 1 Make sure that the parking brake is set and shift the shift lever to D. 2 Gently depress the accelerator pedal. 3 Release the parking brake. X Multi-mode manual transmission 1 With the brake pedal depressed, firmly set the parking brake and shift the shift lever to E or M. When shifting the shift lever to E: Make sure that the display of the gear position indicator shows E.
4-1. Before driving ■ When starting off on an uphill The hill-start assist control is available. (→P. 314, 321) ■ Driving in the rain ●Drive carefully when it is raining, because visibility will be reduced, the windows may become fogged-up, and the road will be slippery. ●Drive carefully when it starts to rain, because the road surface will be especially slippery.
4-1. Before driving 179 ■ Idling time before engine stop (diesel engine) To prevent damage to the turbocharger, allow the engine to idle immediately after high-speed driving or hill climbing. Driving condition Normal city driving High-speed driving Idling time Not necessary Constant speed of approx. 80 km/h (50 mph) Approximately 20 seconds Constant speed of approx.
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accelerator pedals to avoid depressing the wrong pedal. • Accidentally depressing the accelerator pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident.
4-1. Before driving 181 WARNING 4 Driving Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving on slippery road surfaces ● Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. ● Sudden acceleration, engine braking due to shifting, or changes in engine speed could cause the vehicle to skid.
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Rotor damage may result if the pads are not replaced when needed.
4-1. Before driving 183 WARNING 4 Driving Observe the following precautions. Failure to do so may result in death or serious injury. ■ When the vehicle is parked ● Do not leave cigarette lighters in the vehicle. If a cigarette lighter is in a place such as the glove box or on the floor, it may be lit accidentally when luggage is loaded or the seat is adjusted, causing a fire. ● Do not attach adhesive discs to the windshield or windows.
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When braking ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and this may cause one side of the vehicle to brake differently than the other side. Also, the parking brake may not securely hold the vehicle.
4-1. Before driving 185 NOTICE 4 Driving ■ When driving the vehicle (vehicles with a manual transmission) ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain engine output. ● Do not shift gears unless the clutch pedal is fully depressed. After shifting, do not release the clutch pedal abruptly. Doing so may damage the clutch, transmission and gears. ● Observe the following to prevent the clutch from being damaged.
4-1. Before driving NOTICE ■ If you get a flat tire while driving A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually depress the brake pedal to slow down the vehicle. ● It may be difficult to control your vehicle. ● The vehicle will make abnormal sounds or vibrations. ● The vehicle will lean abnormally. Information on what to do in case of a flat tire (→P.
4-1. Before driving 187 Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load: WARNING 4 Driving ■ Things that must not be carried in the trunk The following things may cause a fire if loaded in the trunk: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions.
4-1. Before driving Trailer towing Your vehicle is designed primarily as a passenger carrying vehicle. Towing a trailer will have an adverse effect on handling, performance, braking, durability, and fuel consumption. Your safety and satisfaction depend on the proper use of correct equipment and cautious driving habits. For your safety and the safety of others, do not overload the vehicle or trailer.
4-1. Before driving 189 Important points regarding trailer loads ■ Total trailer weight and permissible drawbar load 1 Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is dangerous. (→P. 592) When towing a trailer, use a friction coupler or friction stabilizer (sway control device). 2 Permissible drawbar load Allocate the trailer load so that the drawbar load is greater than 25 kg (55.1 lb.
4-1. Before driving ■ Information tag (manufacturer’s label) 1 Gross vehicle mass 2 Maximum permissible rear axle capacity ■ Gross vehicle mass The combined weight of the driver, passengers, luggage, towing hitch, total curb mass and drawbar load should not exceed the gross vehicle mass by more than 100 kg (220.5 lb.). Exceeding this weight is dangerous.
4-1. Before driving 191 Installation positions for the towing hitch/bracket and hitch ball 1 461 mm (18.1 in.) 2 461 mm (18.1 in.) 4 4 527 mm (20.7 in.) 5 336 mm (13.2 in.) 6 271 mm (10.7 in.) 7 355 mm (14.0 in.) 8 25 mm (1.0 in.) Driving 3 1064 mm (41.9 in.
4-1. Before driving ■ Tire information ●Increase the tire inflation pressure to 20.0 kPa (0.2 kgf/cm2 or bar, 3 psi) greater than the recommended value when towing. (→P. 606) ●Increase the air pressure of the trailer tires in accordance with the total trailer weight and according to the values recommended by the manufacturer of your trailer. ■ Trailer lights Check that the turn signal lights and stoplights are operating correctly every time you hitch up the trailer.
4-1. Before driving 193 Guidance Your vehicle will handle differently when towing a trailer. In order to avoid accident, death or serious injury, keep the following in mind when towing: ■ Checking connections between trailer and lights Stop the vehicle and check the operation of the connection between the trailer and lights after driving for a brief period as well as before starting off.
4-1. Before driving ■ Important points regarding stability Vehicle movement resulting from uneven road surfaces and strong crosswinds will affect handling. The vehicle may also be rocked by passing buses or large trucks. Frequently check behind when moving alongside such vehicles. As soon as such vehicle movement occurs, immediately start to decelerate smoothly by slowly applying the brakes. Always steer the vehicle straight ahead while braking.
4-1. Before driving 195 WARNING NOTICE ■ Do not directly splice trailer lights Directly splicing trailer lights may damage your vehicle's electrical system and cause a malfunction. 4 Driving Follow all the instructions described in this section. Failure to do so could cause an accident resulting in death or serious injury. ■ Trailer towing precautions When towing, make sure that none of the weight limits are exceeded. (→P.
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) Starting the engine X Multidrive 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Sit in the driver’s seat and firmly depress the brake pedal. 4 Turn the engine switch to the “START” position and start the engine. X Multi-mode manual transmission 1 Check that the parking brake is set.
4-2. Driving procedures 197 Changing the engine switch positions 1 “LOCK” The steering wheel is locked and the key can be removed. (vehicles with a Multidrive: The key can be removed only when the shift lever is in P.) 2 “ACC” Some electrical components such as the audio system can be used. 3 “ON” All electrical components can be used. 4 “START” For starting the engine. When starting the engine, the engine switch may seem stuck in the “LOCK” position.
4-2. Driving procedures WARNING ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Caution when driving Do not turn the engine switch to the “LOCK” position while driving.
4-2. Driving procedures 199 Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch modes. Starting the engine 1 Check that the parking brake is set. X Vehicles with a drive monitor display 2 Multidrive: Check that the shift lever is set in P. Firmly depress the brake pedal.
4-2. Driving procedures X Vehicles with a multi-information display 2 Multidrive: Check that the shift lever is set in P. Firmly depress the brake pedal. Multi-mode manual transmission: Firmly depress the brake pedal, press the engine switch at once and shift the shift lever to N. Manual transmission: Check that the shift lever is set in N. Firmly depress the clutch pedal. will be displayed on the multi-information display. If it is not displayed, the engine cannot be started.
4-2. Driving procedures 201 Stopping the engine 1 Stop the vehicle. 2 Multidrive: Shift the shift lever to P. Multi-mode manual transmission: Shift the shift lever to E, M or R. Manual transmission: Shift the shift lever to N. 3 Set the parking brake. (→P. 223) 4 Press the engine switch.
4-2. Driving procedures Changing engine switch modes Modes can be changed by pressing the engine switch with the brake pedal (except vehicles with a manual transmission) or clutch pedal (vehicles with a manual transmission) released. (The mode changes each time the switch is pressed.) X Vehicles with a drive monitor display Off* The emergency flashers can be used. The smart entry & start system indicator light (green) is off.
4-2. Driving procedures X 203 Vehicles with a multi-information display Off* The emergency flashers can be used. The multi-information display will not be displayed. ACCESSORY mode Some electrical components such as the audio system can be used. “Power ON.” will be displayed on the multi-information display. IGNITION ON mode All electrical components can be used. “Power ON.” will be displayed on the multi-information display.
4-2. Driving procedures When stopping the engine with the shift lever in a position other than P (vehicles with a Multidrive) If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure to turn the switch off: 1 Check that the parking brake is set. 2 Shift the shift lever to P.
4-2. Driving procedures 205 4 Driving ■ Auto power off function X Vehicles with a Multidrive If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNITION ON mode (the engine is not running) for more than an hour with the shift lever in P, the engine switch will automatically turn off. However, this function cannot entirely prevent battery discharge. Do not leave the vehicle with the engine switch in ACCESSORY or IGNITION ON mode for long periods of time when the engine is not running.
4-2. Driving procedures ■ When the steering lock cannot be released Vehicles with a drive monitor display: The smart entry & start system indicator light (green) will flash quickly. Vehicles with a multi-information display: “Steering lock active.” will be displayed on the multi-information display. Vehicles with a Multidrive: Check that the shift lever is set in P. Press the engine switch while turning the steering wheel left and right.
4-2. Driving procedures 207 WARNING 4 Driving ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Caution while driving If engine failure occurs while the vehicle is moving, do not lock or open the doors until the vehicle reaches a safe and complete stop.
4-2. Driving procedures NOTICE ■ To prevent battery discharge ● Do not leave the engine switch in ACCESSORY or IGNITION ON mode for long periods of time without the engine running. ● Vehicles with a drive monitor display: If the smart entry & start system indicator light (green) is illuminated, the engine switch is not off. When exiting the vehicle, always check that the engine switch is off. ● Vehicles with a multi-information display: If “Power ON.
4-2. Driving procedures 209 Multidrive∗ Shifting the shift lever 4 While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever. Vehicles with a smart entry & start system: While the engine switch is in IGNITION ON mode, depress the brake pedal and move the shift lever. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped.
4-2. Driving procedures Shift position purpose Shift position Objective or function P Parking the vehicle/starting the engine R Reversing N Neutral D Normal driving*1 M 7-speed sport sequential shiftmatic mode driving*2 (→P. 211) *1: To improve fuel efficiency and reduce noises, set the shift lever in D for normal driving. * 2 : Selecting gear step using the M position achieves suitable engine braking forces by operating the shift lever. Sport mode Press the switch.
4-2. Driving procedures 211 Changing gear steps in the M position To enter 7-speed sport sequential shiftmatic mode, shift the shift lever to M. Gear steps can then be selected by operating the shift lever, allowing you to drive in the gear step of your choosing. 1 Upshifting 2 Downshifting The gear changes once every time the shift lever is operated. The selected gear step, from M1 to M7, will be displayed in the meter.
4-2. Driving procedures ■ When driving with cruise control activated (if equipped) Even when performing the following actions with the intent of enabling engine braking, engine braking will not activate because cruise control will not be canceled. ●While driving in D or 7-speed sport sequential shiftmatic mode, downshifting to 6, 5 or 4. (→P. 211) ●When switching the driving mode to sport mode while driving in D position. (→P.
4-2. Driving procedures 213 Multi-mode Manual Transmission∗ Shifting the shift lever 4 Driving Shift position uses Shift position Function R Reversing N Neutral or starting the engine E Easy (E) mode driving*1 M Manual (M) mode driving*2 (→P. 214) *1: The most appropriate gear position is automatically selected according to operation of the accelerator pedal and vehicle speed. * 2 : A gear position must be selected manually.
4-2. Driving procedures Selecting the Easy sports (Es) mode (when the shift lever in E only) The Es mode can be selected for superior driving performance and to achieve a feeling of faster acceleration than in E mode. Press the “Es” switch. Press the switch once more to cancel the Es mode. To improve fuel economy, cancel the Es mode for ordinary driving. Changing gear positions in M mode Shift the shift lever to M and operate the shift lever or paddle shift switch.
4-2. Driving procedures 215 Changing gear positions in E or Es mode When the shift position is in E or Es, the paddle shift switches can be used to select a gear position temporarily. When a gear position is selected, the gear position will be displayed. 1 Upshifting 2 Downshifting *1: Vehicles with a drive monitor dis- *1 *2 play * 2 : Vehicles with a multi-information display Gear Shift Indicator 1 Upshifting 2 Downshifting Gear Shift Indicator operates only in M mode.
4-2. Driving procedures ■ Maximum allowable speeds Observe the following maximum allowable speeds in each gear when maximum acceleration is necessary. km/h (mph) Gear position Maximum speed 1 42 (26) 2 79 (49) 3 115 (71) 4 156 (96) 5 ■ Downshifting restrictions warning buzzer (in E mode [when the paddle shift switch is operated] or M mode) To help ensure safety and driving performance, downshifting operation may sometimes be restricted.
4-2. Driving procedures 217 WARNING ■ Gear Shift Indicator display For safety, the driver should not look only at the display. Refer to the display when it is safe to do so while considering actual traffic and road conditions. Failure to do so may lead to an accident. 4 Driving ■ If the parking brake is set when the shift lever is in a position other than N with engine running ●When the driver’s door is opened A buzzer will sound and the gear position will automatically change to N in 10 seconds.
4-2. Driving procedures Manual transmission∗ Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release it slowly. Shifting the shift lever to R Shift the shift lever to R while lifting up the ring section.
4-2. Driving procedures 219 Gear Shift Indicator Gear Shift Indicator is a guide to help the driver achieve improved fuel economy and reduced exhaust emissions within limits of engine performance.
4-2. Driving procedures X Diesel engine km/h (mph) Maximum speed 1ND-TV engine Shift position Vehicles without a Stop & Vehicles with a Stop & Start system Start system 1 42 (26) 45 (27) 2 79 (49) 83 (51) 3 122 (75) 129 (80) 4 165 (102) 174 (108) 5 WARNING ■ Gear Shift Indicator display For safety, the driver should not look only at the display. Refer to the display when it is safe to do so while considering actual traffic and road conditions.
4-2. Driving procedures 221 NOTICE ■ To prevent damage to the transmission ● Do not shift the shift lever to R without depressing the clutch pedal. 4 Driving ● Do not lift up the ring section except when shifting the lever to R. ● Shift the shift lever to R only when the vehicle is stationary.
4-2. Driving procedures Turn signal lever Operating instructions 1 Right turn 2 Lane change to the right (move the lever partway and release it) The right hand signals will flash 3 times. 3 Lane change to the left (move the lever partway and release it) The left hand signals will flash 3 times. 4 Left turn ■ Turn signals can be operated when X Vehicles without a smart entry & start system The engine switch is in the “ON” position.
4-2. Driving procedures 223 Parking brake Operating instructions 1 To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. 2 To release the parking brake, slightly raise the lever and lower it completely while pressing the button. 4 Driving ■ Parking brake engaged warning buzzer A buzzer will sound if the vehicle is driven at a speed of approximately 5 km/h (3 mph) or more with the parking brake engaged. (→P. 513, 526) ■ Usage in winter time →P.
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: X 1 Type A Off The daytime running lights turn on. (→P. 227) 2 The front position, tail, license plate and instrument panel lights turn on. 3 The headlights and all lights listed above turn on.
4-3. Operating the lights and wipers X 1 Type B The headlights, daytime running lights (→P. 227) and all the lights listed below turn on and off automatically. (Vehicles without a smart entry & start system: When the engine switch is in the “ON” position) (Vehicles with a smart entry & start system: When the engine switch is in IGNITION ON mode) * The front position, tail, license plate and instrument panel lights turn on. 3 The headlights and all lights listed above turn on.
4-3. Operating the lights and wipers Turning on the high beam headlights 1 With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. 2 Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off. Follow me home system This system allows the headlights to be turned on for 30 seconds when the engine switch is turned off.
4-3. Operating the lights and wipers 227 Manual headlight leveling dial (vehicles with halogen headlights) The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle. 1 Raises the level of the head- lights 2 Lowers the level of the head- lights ■ Guide to dial settings Occupancy and luggage load conditions Dial position Luggage load Driver None 0 Driver and front passenger None 0 All seats occupied None 1.
4-3. Operating the lights and wipers ■ Automatic light off system X Vehicles without a smart entry & start system When the light switch is in or : The headlights and front fog lights (if equipped) turn off automatically if the engine switch is turned off. When the light switch is in : All lights turn off automatically if the engine switch is turned off. To turn the lights on again, turn the engine switch to the “ON” position, or turn the light switch off once and then back to or .
4-3. Operating the lights and wipers 229 ■ Customization Settings (e.g. light sensor sensitivity) can be changed. (Customizable features: →P. 611) WARNING ■ Manual headlight leveling dial precautions (if equipped) Observe the following precautions. Failure to do so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury. ● Do not adjust the headlight beam level while the vehicle is moving. ● Adjust the headlight level to the proper level before driving.
4-3. Operating the lights and wipers Fog light switch The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. X Rear fog light switch 1 Turns the rear fog light off 2 Turns the rear fog light on Releasing the switch ring returns it to . Operating the switch ring again turns the rear fog light off.
4-3. Operating the lights and wipers X 231 Front and rear fog light switch 1 Turns the front and rear fog lights off 2 Turns the front fog lights on 3 Turns both front and rear fog lights on Releasing the switch ring returns it to . Operating the switch ring again turns only the rear fog light off. 4 Driving ■ Fog lights can be used when X Vehicles with a rear fog light switch The headlights are turned on.
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever X Intermittent windshield wipers with interval adjuster The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted.
4-3. Operating the lights and wipers 233 7 Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts. Vehicles with headlight cleaners: When the headlights are on and the lever is pulled and held, the headlight cleaners will operate once. After this, the headlight cleaners will operate every 5th time the lever is pulled. X Rain-sensing windshield wipers When “AUTO” is selected, the wipers will operate automatically when the sensor detects falling rain.
4-3. Operating the lights and wipers When “AUTO” is selected, the sensor sensitivity can be adjusted as follows by turning the switch ring. 5 Increases the rain-sensing windshield wiper sensitivity 6 Decreases the rain-sensing windshield wiper sensitivity 7 Washer/wiper dual operation Wipers will automatically operate a couple of times after the washer squirts. Vehicles with headlight cleaners: When the headlights are on and the lever is pulled and held, the headlight cleaners will operate once.
4-3. Operating the lights and wipers 235 ■ Raindrop sensor (vehicles with rain-sensing windshield wipers) ●The raindrop sensor judges the amount of raindrops. An optical sensor is adopted. It may not operate properly when sunlight from the rising or setting of the sun intermittently strikes the windshield, or if bugs etc. are present on the windshield. WARNING ■ Caution regarding the use of washer fluid When it is cold, do not use the washer fluid until the windshield becomes warm.
4-3. Operating the lights and wipers NOTICE ■ When the windshield is dry Do not use the wipers, as they may damage the windshield. ■ When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may overheat. ■ When a nozzle becomes blocked In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Do not try to clear it with a pin or other object. The nozzle will be damaged.
4-4. Refueling 237 Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Close all the doors and windows, and turn the engine switch off. ● Confirm the type of fuel. ■ Fuel types →P. 609 ■ Fuel tank opening for unleaded gasoline (gasoline engine) To help prevent incorrect fueling, your vehicle has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps.
4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity. It is important to discharge static electricity before refueling because sparks resulting from static electricity can cause fuel vapors to ignite while refueling.
4-4. Refueling 239 Opening the fuel tank cap 1 Pull up the opener to open the fuel filler door. 2 Turn the fuel tank cap slowly to remove it and hang it on the back of the fuel filler door. 4 After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction. WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle.
4-5. Toyota Safety Sense Toyota Safety Sense∗ The Toyota Safety Sense consists of the following drive assist systems and contributes to a safe and comfortable driving experience. ◆ PCS (Pre-Crash Safety system) →P. 246 ◆ LDA (Lane Departure Alert) →P. 259 ◆ Automatic High Beam →P. 264 ◆ RSA (Road Sign Assist) →P.
4-5.
4-5. Toyota Safety Sense WARNING ■ Front sensor The front sensor uses lasers to detect vehicles ahead of your vehicle. The front sensor is classified as class 1M laser product according to the IEC 60825-1 standard. Under normal usage conditions, these lasers are not harmful to the naked eye. However, it is necessary to observe the following precautions. Failure to do so may result in the loss of eyesight or severe visual impairment.
4-5. Toyota Safety Sense 243 WARNING Laser emission data Maximum average power: 45 mW Pulse duration: 33 ns Wave length: 905 nm Divergence (horizontal x vertical): 28° x 12° ■ To avoid malfunction of the front sensor Observe the following precautions. Otherwise, the front sensor may not operate properly, possibly leading to an accident resulting in death or serious injury. ● Keep the windshield clean at all times. If the windshield is dirty or covered with an oily film, water droplets, snow, etc.
4-5. Toyota Safety Sense WARNING ● If there is a large difference in temperature between the inside and outside of the vehicle, such as in winter, the windshield is likely to fog up easily. If the part of the windshield in front of the front sensor is fogged up or covered with condensation or ice, the PCS warning light may flash and the system may be temporarily disabled. In this case, use the windshield defogger to remove the fog, etc. (→P.
4-5. Toyota Safety Sense 245 WARNING ● If a surfboard or other long object is to be mounted on the roof, make sure that it will not obstruct the front sensor. ● Do not modify the headlights or other lights. ● Do not attach anything to or place anything on the dashboard.
4-5. Toyota Safety Sense PCS (Pre-Crash Safety system)∗ The pre-crash safety system uses the front sensor to detect vehicles in front of your vehicle. When the system determines that the possibility of a frontal collision with a vehicle is high, a warning operates to urge the driver to take evasive action and the potential brake pressure is increased to help the driver avoid the collision.
4-5. Toyota Safety Sense 247 WARNING 4 Driving ■ Limitations of the pre-crash safety system ● The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. Do not use the pre-crash safety system instead of normal braking operations under any circumstances. This system will not prevent collisions or lessen collision damage or injury in every situation. Do not overly rely on this system.
4-5. Toyota Safety Sense WARNING ● While driving, such as when driving through a railway crossing, the system may determine that the possibility of a collision with an object, such as railway crossing barrier, is high and operate the pre-crash braking function. To move the vehicle in an emergency, such as if the system operates in a railway crossing, perform the following operations and then take the necessary measures to ensure your safety.
4-5. Toyota Safety Sense 249 Changing settings of the pre-crash safety system ■ Enabling/disabling the pre-crash safety system Press the PCS switch for 3 seconds or more. The PCS warning light will turn on and a message will be displayed on the multi-information display. To enable the system, press the PCS switch again. The pre-crash safety system is enabled each time the engine is started.
4-5. Toyota Safety Sense ■ Operational conditions The pre-crash safety system is enabled and determines that the possibility of a frontal collision with a vehicle is high. Each function is operational at the following speeds: ●Pre-crash warning: • Vehicle speed is approximately 15 to 140 km/h (10 to 86 mph). • The relative speed between your vehicle and a preceding vehicle is approximately 15 km/h (10 mph) or more. ●Pre-crash brake assist: • Vehicle speed is approximately 30 to 80 km/h (19 to 49 mph).
4-5. Toyota Safety Sense 251 ■ Conditions under which the system may operate even if there is no possibility of a collision ●In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
4-5. Toyota Safety Sense • When passing extremely close to a vehicle or structural object • When there is a vehicle or object by the roadside at the entrance of a curve • When driving on a narrow path surrounded by a structure, such as in a tunnel or on an iron bridge • When there is a reflective object (manhole cover, steel plate, etc.), steps, dip, or a protrusion on the road surface or roadside • When passing through a place with a low structure above the road (low ceiling, traffic sign, etc.
4-5. Toyota Safety Sense 253 • When rapidly closing on an electric toll gate barrier, parking area barrier, or other barrier that opens and closes • When using an automatic car wash • When approaching a low hanging object that may contact the vehicle, such as a banner, tree branches or thick grass • When the vehicle is hit by water, snow, dust, etc.
4-5. Toyota Safety Sense • When the sensor is misaligned due to a strong impact being applied to the sensor, etc. • When the vehicle is being parked in a place where there is a low hanging object at the height of the front sensor • When the windshield is covered with raindrops, etc.
4-5.
4-5. Toyota Safety Sense • When a vehicle ahead is not directly in front of your vehicle • When driving in inclement weather such as heavy rain, fog, snow or a sand storm • When the vehicle is hit by water, snow, dust, etc.
4-5. Toyota Safety Sense 257 • If your vehicle is skidding • When the front part of the vehicle is raised or lowered If the wheels are misaligned If a wiper blade is blocking the front sensor The vehicle is wobbling. The vehicle is being driven at extremely high speeds. When driving on roads with sharp bends or uneven surfaces When a preceding vehicle is a poor reflector of laser • When the sensor is misaligned due to a strong impact being applied to the sensor, etc.
4-5. Toyota Safety Sense ■ If the PCS warning light flashes and a warning message is displayed on the multi-information display The pre-crash safety system may be temporarily unavailable or there may be a malfunction in the system.
4-5. Toyota Safety Sense 259 LDA (Lane Departure Alert)∗ Summary of function When driving on roads with white (yellow) lines, this function alerts the driver when the vehicle might depart from its lane. The LDA system recognizes visible white (yellow) lines with the front sensor on the upper portion of the windshield.
4-5. Toyota Safety Sense WARNING ■ Before using the LDA system Do not rely solely upon the LDA system. LDA is not a system which automatically drives the vehicle or reduces the amount of attention that must be paid to the area in front of the vehicle. The driver must always assume full responsibility for driving safely by always paying careful attention to the surrounding conditions and operate the steering wheel to correct the path of the vehicle.
4-5. Toyota Safety Sense 261 Turning the LDA system on Press the LDA switch to turn the LDA system on. The LDA indicator illuminates and a message is displayed on the multi-information display. Press the LDA switch again to turn the LDA system off. When the LDA system is turned on or off, operation of the LDA system continues in the same condition the next time the engine is started Indication on the multi-information display X Indicates that the system is recognizing white (yellow) lines.
4-5. Toyota Safety Sense ■ If “Check LDA system.” is displayed on the multi-information display If the LDA indicator does not come on when the LDA switch is pressed to turn the system on, the system may be malfunctioning. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. ■ Operation conditions This function operates when all of the following conditions are met. ●LDA is turned on.
4-5. Toyota Safety Sense 263 4 Driving ■ Conditions in which functions may not operate properly In the following situations, the front sensor may not detect white (yellow) lines and various functions may not operate normally. ●There are shadows on the road that run parallel with, or cover, the white (yellow) lines. ●The vehicle is driven in an area without white (yellow) lines, such as in front of a tollgate or checkpoint, or at an intersection, etc.
4-5. Toyota Safety Sense Automatic High Beam∗ The Automatic High Beam uses an in-vehicle front sensor to assess the brightness of streetlights, the lights of vehicles ahead etc., and automatically turns the high beam on or off as necessary. WARNING ■ Limitations of the Automatic High Beam Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning the high beam on or off manually if necessary.
4-5. Toyota Safety Sense 265 Turning the high beam on/off manually ■ Switching to low beam Pull the lever to original position. The Automatic High Beam indicator will turn off. Push the lever away from you to activate the Automatic High Beam system again. ■ Switching to high beam Turn the light switch to position. 4 Driving The Automatic High Beam indicator will turn off and the high beam indicator will turn on.
4-5. Toyota Safety Sense ■ High beam automatic turning on or off conditions ●When all of the following conditions are fulfilled, the high beam will be automatically turned on (after approximately 1 second): • Vehicle speed is approximately 40 km/h (25 mph) or more. • The area ahead of the vehicle is dark. • There are no vehicles ahead with headlights or tail lights turned on. • There are few streetlights on the road ahead.
4-5. Toyota Safety Sense 267 4 Driving ●In the situations shown below, the system may not be able to accurately detect surrounding brightness levels. This may cause the low beams to remain on or the high beams to cause problems for pedestrians, vehicles ahead or other parties. In these cases, manually switch between the high and low beams. • In bad weather (rain, snow, fog, sandstorms, etc.) • The windshield is obscured by fog, mist, ice, dirt, etc. • The windshield is cracked or damaged.
4-5. Toyota Safety Sense RSA (Road Sign Assist)∗ Summary of function RSA recognizes specific road signs using the front sensor and provides information to the driver via the multi-information display. If the system judges that the vehicle is being driven over the speed limit, performing prohibited actions, etc., in relation to the recognized road signs, it alerts the driver using a warning display and warning buzzer*. *: This setting needs to be customized.
4-5. Toyota Safety Sense 269 Indication on the multi-information display After the front sensor recognizes a sign, it is displayed on the multiinformation display when the vehicle passes the sign. ● When the driving assist system information is selected, a maximum of 3 signs can be displayed. (→P. 101) A no overtaking sign and a speed limit sign with supplemental mark are not displayed.
4-5. Toyota Safety Sense Types of recognized road signs The following types of road signs, including electronic signs and blinking signs, are recognized. A non-official (not meeting the Vienna Convention) or a recently introduced traffic sign may not be recognized.
4-5. Toyota Safety Sense 271 Warning display In the following situations, the RSA system alerts the driver using a warning display. ● When the vehicle speed exceeds the speed warning threshold applied to the speed limit of the sign displayed on the multi-information display, the sign color becomes inverted. ● If it is detected that your vehicle is overtaking when a no overtaking sign is displayed on the multi-information display, the sign flashes.
4-5. Toyota Safety Sense ■ Conditions in which the function may not operate or detect correctly In the following situations, RSA does not operate normally and may not recognize signs, display the incorrect sign, etc. However, this does not indicate a malfunction. ●The front sensor is misaligned due to a strong impact being applied to the sensor, etc. ●Dirt, snow, stickers, etc., are on the windshield near the front sensor.
4-5. Toyota Safety Sense 273 ■ When driving vehicle in country with different speed unit Since RSA recognizes signs based on the set unit of the meter, it is necessary to change the set unit of the meter. Adjust the set unit of the meter to the speed unit of signs in the current location. (→P. 611) ■ Turning the system on/off 1 Select (→P. 107) on the settings display 2 Press the enter/set switch on the meter control switches.
4-6. Using the driving support systems Stop & Start system∗ The Stop & Start system stops and restarts the engine according to the clutch pedal operation when the vehicle is stopped. Stop & Start system operation ■ Stopping the engine 1 With the clutch pedal fully depressed, depress the brake pedal, and stop the vehicle. 2 Shift the shift lever to N (→P. 209), and release the clutch pedal. The Stop & Start indicator will come on.
4-6. Using the driving support systems 275 Disabling the Stop & Start system Press the Stop & Start cancel switch to disable the Stop & Start system. The Stop & Start cancel indicator will come on. Pressing the switch again will enable the Stop & Start system and the Stop & Start cancel indicator will turn off.
4-6. Using the driving support systems ■ Operating conditions ●The Stop & Start system is operational when all of the following conditions are met: • Vehicles with an automatic air conditioning system: is off. • The driver’s seat belt is fastened. • The engine is adequately warmed up. • The driver’s door is closed. • The clutch pedal is not being depressed. • The outside temperature is -5°C (23°F) or higher. • The shift lever is in N. • The hood is closed.
4-6. Using the driving support systems 277 4 Driving ●In the following situations, the engine may restart automatically if the engine is stopped by the Stop & Start system. (To enable stopping of the engine by the Stop & Start system, drive the vehicle.) • The brake pedal is pumped or strongly depressed. • The air conditioning system is being used. • The battery is not sufficiently charged.
4-6. Using the driving support systems ■ If the windshield is fogged up while the engine is stopped by the Stop & Start system ●Vehicles with a manual air conditioning system: Restart the engine by depressing the clutch pedal or by pressing the Stop & Start cancel switch, and then set the air outlet selector dial to . (→P.394) If the windshield fogs up frequently, press the Stop & Start cancel switch to deactivate the system. ●Vehicles with an automatic air conditioning system: Turn on.
4-6. Using the driving support systems 279 ■ Changing the idling stop time with the air conditioning system on The length of time the Stop & Start system will operate when the air conditioning system is on can be changed by performing the following operation. (The length of time the Stop & Start system will operate when the air conditioning system is off cannot be changed.
4-6. Using the driving support systems ■ The Stop & Start system protection function ●Vehicles without a smart entry & start system: When an excessively loud sound is being projected by the audio system, the audio system may be automatically cut off in order to reduce battery consumption. If it occurs, turn the engine switch off, wait for 3 seconds or longer and then turn it to “ACC” or “ON” position to re-enable the audio system.
4-6. Using the driving support systems 281 ■ Multi-information display messages (vehicles with a multi-information display) If the following situations, and a message may be displayed on the multi-information display. ●When the engine cannot be stopped by the Stop & Start system Message Details The brake pedal is not depressed “Depress brake enough. firmly to activate.” If the brake pedal is depressed further, the system will operate.
4-6. Using the driving support systems Message Details “Battery charging.” “For brake tem.” • The battery charge amount may be low. Engine stop is temporarily prohibited to prioritize charging of the battery, but if the engine is operated for a short while, engine stop is allowed.
4-6. Using the driving support systems Message 283 Details “Driver seat belt The driver seat belt is not fastened. unbuckled.” ●When the engine automatically restarts while stopped by the Stop & Start system Message Details • The air conditioning system has been turned on or is being used. “For climate con• trol.” has been turned on. (Vehicles with an automatic air conditioning system) “For brake tem.” “Battery charging.” The battery charge amount may be low.
4-6. Using the driving support systems ■ If “Stop & Start system malfunction. Inspect at dealer.” is displayed on the multi-information display (vehicles with a multi-information display) The system may be malfunctioning. Have the vehicle inspected by any authorized Toyota retailers or Toyota authorized repairers, or any reliable repairers. ■ If the Stop & Start cancel indicator continues to flash The system may be malfunctioning.
4-6. Using the driving support systems 285 NOTICE 4 Driving ■ To ensure the system operates correctly If any of the following situations occur, the Stop & Start system may not operate correctly. Have your vehicle checked by any authorized Toyota retailers or Toyota authorized repairers, or any reliable repairers. ● While the driver’s seat belt is fastened, the driver’s and front passenger’s seat belt reminder light flashes.
4-6. Using the driving support systems Cruise control∗ Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. 1 Indicators 2 Cruise control switch Setting the vehicle speed 1 Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on. Press the button again to deactivate the cruise control. 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
4-6. Using the driving support systems 287 Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. 1 Increases the speed 2 Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold the lever in the desired direction. The set speed will be increased or decreased as follows: Fine adjustment: By approximately 1.6 km/h (1 mph) each time the lever is operated.
4-6. Using the driving support systems ■ Cruise control can be set when ●The shift lever is in the D or gear step 4 or higher of M has been selected. (Multidrive) ●Vehicle speed is above approximately 40 km/h (25 mph). ■ Accelerating after setting the vehicle speed ●The vehicle can be accelerated normally. After acceleration, the set speed resumes.
4-6. Using the driving support systems 289 WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
4-6. Using the driving support systems Speed limiter∗ Summary of functions A desired maximum speed can be set using the cruise control switch. The speed limiter prevents vehicle speed from exceeding the set speed.
4-6. Using the driving support systems 291 Setting the vehicle speed 1 Turn the speed limiter switch on. Press the switch once more to deactivate the speed limiter. *1 *2 2 Accelerate or decelerate to the 4 If the lever is pushed down while the vehicle speed is below 30 km/h (20 mph), the set speed will be 30 km/h (20 mph).
4-6. Using the driving support systems Canceling and resuming the speed limiter 1 Cancel Pull the lever towards you to cancel the speed limiter. 2 Resume To resume use of the speed limiter, push the lever up.
4-6. Using the driving support systems 293 Toyota parking assist-sensor∗ The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display and a buzzer. Always check the surrounding area when using this system.
4-6. Using the driving support systems ■ Enabling/disabling the Toyota parking assist-sensor system This system can be enabled/disabled on the multi-information display. 1 Display the settings display (→P. 101), and then press on the meter control switches to select / . 2 Press on the meter control switches to enable/disable the system. When enabled, the Toyota parking assist-sensor indicator will illuminate.
4-6. Using the driving support systems 295 Sensor detection display, obstacle distance ■ Distance display Sensors that detect an obstacle will illuminate continuously or blink. Approximate distance to obstacle Display Corner sensors/ front side sensors* Center sensors Front: 100 to 55 cm (3.3 to 1.8 ft.) Rear: 150 to 55 cm (4.9 to 1.8 ft.) (continuous) 4 55 to 42.5 cm (1.8 to 1.4 ft.) 37.5 to 25 cm (1.2 to 0.8 ft.) 42.5 to 30 cm (1.4 to 1.0 ft.) Less than 25 cm (0.8 ft.) Less than 30 cm (1.
4-6. Using the driving support systems ■ Buzzer operation and distance to an obstacle A buzzer sounds when the sensors are operating. ● The buzzer beeps faster as the vehicle approaches an obstacle. When the vehicle comes within the following distance of the obstacle, the buzzer sounds continuously: • Corner sensors and front side sensors*: Approximately 25 cm (0.8 ft.) • Center sensors: Approximately 30 cm (1.0 ft.
4-6. Using the driving support systems 297 4 Driving ■ The Toyota parking assist-sensor can be operated when Vehicles without a smart entry & start system: The engine switch is in the “ON” position. Vehicles with a smart entry & start system: The engine switch is in IGNITION ON mode. ●Front sensors: • Vehicles with a Multidrive: The shift lever is in a position other than P. • Vehicles with a multi-mode manual transmission or manual transmission: The parking brake is not applied.
4-6. Using the driving support systems ●The shape of the obstacle may prevent the sensor from detecting it. Pay particular attention to the following obstacles: • Wires, fences, ropes, etc. • Cotton, snow and other materials that absorb sound waves • Sharply-angled objects • Low obstacles • Tall obstacles with upper sections projecting outwards in the direction of your vehicle ■ If “Clean sonar.” is displayed on the multi-information display A sensor may be dirty or covered with snow or ice.
4-6. Using the driving support systems 299 Simple-IPA (Simple-Intelligent Parking Assist)∗ Simple-IPA is a system that assists parallel parking operations. When parking between two parked vehicles or in the space behind one parked vehicle, the sensors installed on the sides of the front bumper are utilized and a space which the vehicle can be parked in is detected. Parking operations are then assisted by automatic operation of the steering wheel.
4-6. Using the driving support systems Operating Simple-IPA Operate Simple-IPA according to the multi-information display and the buzzer. The system detects parking spaces on the front passenger’s side of the vehicle and assists with parking in a detected space. When parking in a space on the driver’s side of the vehicle, move the turn signal lever to indicate turning on the driver’s seat side. Leave the turn signal lever in that position until automatic steering begins.
4-6. Using the driving support systems 301 3 When the multi-information dis- play changes, reduce the vehicle speed. Move the vehicle forward slowly until the buzzer sounds. 4 the vehicle when the buzzer sounds. The multi-information display will change. Visually check that the detected space is safe for parking. If the vehicle moves 10 m (32 ft.) or more after the buzzer sounds, detection of a new parking space will begin.
4-6. Using the driving support systems 5 Shift the shift lever to R. The multi-information display will change and automatic steering will begin. While taking care not to catch your hands on the steering wheel and checking the safety of the surrounding area, reverse the vehicle slowly by operating the accelerator and brake pedals. During automatic steering, maintain a vehicle speed of 6 km/h (3 mph) or less. 6 When the multi-information dis- play changes, reduce the vehicle speed.
4-6. Using the driving support systems 303 7 When the rear Toyota parking assist-sensor’s warning buzzer sounds continuously, completely stop the vehicle immediately. The multi-information display will change when the warning buzzer starts sounding continuously. 4 8 Shift the shift lever to D (Multidrive), E, M (multi-mode manual While the steering wheel is turning, keep the vehicle at a complete stop.
4-6. Using the driving support systems 10 Shift the shift lever to R. While the steering wheel is turning, keep the vehicle at a complete stop. When the steering wheel stops turning, reverse the vehicle slowly while checking the safety of the area behind the vehicle. 11 Repeat steps 7 through 10 until the parking assist operation has completed. When the parking assist operation has completed, the buzzer sounds and the multi-information display changes.
4-6. Using the driving support systems 305 When a message is shown on the multi-information display Message Cause What to do The vehicle speed Reduce vehicle speed “IPA slot not detected, exceeded 30 km/h (18 to 30 km/h (18 mph) or speed too high.” mph). less. The Simple-IPA switch Turn the was turned off. switch on. Simple-IPA The Simple-IPA switch Park the vehicle manuwas turned on while ally or detect another reversing. parking space.
4-6. Using the driving support systems Message Cause The power temporarily heated. “IPA cancelled, over.” take What to do steering Attempt to use Simpleover- IPA after waiting a little while. Have the vehicle inspected by any authorized Toyota Possible system maldealer or repairer, or function. another duly qualified and equipped professional. The steering wheel was Park the vehicle manu“IPA cancelled, take manually operated dur- ally or detect another over, driver intervened.
4-6. Using the driving support systems Message Cause What to do “IPA cancelled, take The switch was Turn the over, TRC/VSC is off.” turned off. on. switch More than 6 minutes have elapsed since the Simple-IPA switch was Park the vehicle manuturned on and the shift ally or detect another lever was shifted to R, parking space. before automatic steering could begin. “IPA cancelled, over, timeout.
4-6. Using the driving support systems Message Cause What to do Reduce vehicle speed Excessive vehicle “IPA not available, to 30 km/h (18 mph) or speed (over 50 km/h speed too high.” less and turn the Sim[31 mph]) ple-IPA switch on. “IPA not available, The TRC/VSC is off.” After turning the switch is off. switch on, turn the Simple-IPA switch on. System initialization “IPA not available, stop has not been perPerform the vehicle, turn wheel formed since the bat→P.
4-6. Using the driving support systems 309 ■ Operation conditions of Simple-IPA ●The engine is started. ●The switch is on. 4 Driving ●The vehicle speed is 30 km/h (18 mph) or less. (During automatic steering, the vehicle speed is 6 km/h [3 mph] or less.) ■ Canceling of the Simple-IPA operation Simple-IPA operation will be canceled when: ●The Simple-IPA switch is turned off. ●The ABS, VSC or TRC is operating. ●The shift lever is shifted to R during detection of a parking space.
4-6. Using the driving support systems ■ When using Simple-IPA repeatedly When Simple-IPA is used repeatedly, the power steering may overheat temporarily. It may deactivate or cancel Simple-IPA operation. In this case, wait a few minutes before using Simple-IPA again. ■ Toyota parking assist-sensor operation during Simple-IPA operation Even if the Toyota parking assist-sensor switch is turned off while Simple-IPA is activated, the Toyota parking assist-sensor will keep operating.
4-6. Using the driving support systems 311 WARNING 4 Driving ■ Conditions in which the use of Simple-IPA is prohibited Do not use Simple-IPA under the following conditions. Doing so may cause improper operation and lead to an unexpected accident. ● On sharp bends or slopes. ● On slippery or icy roads, or in snow. ● On uneven road surfaces such as gravel. ● During bad weather such as heavy rain, fog, snow, or a sandstorm. ● When the tires are extremely worn or tire pressure is low.
4-6. Using the driving support systems NOTICE ■ When using the Simple-IPA ● Check that the parking space is suitable. (Width of the space, if there are any obstacles, road surface condition, etc.) ● Simple-IPA will not operate properly if the vehicle at the front or back of the parking space moves, or if an obstacle enters the parking space after the sensors have detected the parking space. Always check the surrounding area during parking assist operation.
4-6. Using the driving support systems 313 Diesel particulate filter system (diesel engine only) When the deposit collected by the filter reaches a predetermined amount, it is automatically cleaned. ■ Cleaning the DPF catalytic converter Cleaning the DPF catalytic converter is performed as necessary in accordance with driving conditions. ■ Equipment characteristics ■ Replacing the engine oil →P.
4-6. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle.
4-6. Using the driving support systems 315 ◆ Emergency brake signal When the brakes are applied suddenly, the emergency flashers automatically flash to alert the vehicle behind. When the TRC/VSC systems are operating The slip indicator light will flash while the TRC/VSC systems are operating. Disabling the TRC system 4 If the vehicle gets stuck in mud, dirt or snow, the TRC system may to turn the system off may make it easier for you to rock the vehicle in order to free it.
4-6. Using the driving support systems X Vehicles with a multi-information display To turn the TRC system off, quickly press and release . The “TRC OFF” will be shown on the multi-information display. Press again to turn the system back on. ■ Turning off both TRC and VSC systems X Vehicles with a drive monitor display To turn the TRC and VSC systems off, press and hold for more than 3 seconds while the vehicle is stopped. The “TRC OFF” indicator light and VSC OFF indicator light will come on.
4-6. Using the driving support systems 317 ■ When the message is displayed on the multi-information display showing that TRC has been disabled even if has not been pressed (vehi- 4 Driving cles with a multi-information display) TRC cannot be operated. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
4-6. Using the driving support systems ■ EPS operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction.
4-6. Using the driving support systems 319 WARNING 4 Driving ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■ Stopping distance when the ABS is operating may exceed that of normal conditions The ABS is not designed to shorten the vehicle’s stopping distance.
4-6. Using the driving support systems WARNING ■ Hill-start assist control does not operate effectively when (except for vehicles with a diesel engine for Turkey) ● Do not overly rely on hill-start assist control. Hill-start assist control may not operate effectively on steep inclines and roads covered with ice. ● Unlike the parking brake, hill-start assist control is not intended to hold the vehicle stationary for an extended period of time.
4-6. Using the driving support systems 321 Hill-start assist control (vehicles with a diesel engine for Turkey) Assists with starting off and temporarily maintains braking power even if the foot is removed from the brake pedal when starting off on an incline or a slippery slope. To engage hill-start assist control, further depress the brake pedal when the vehicle is stopped completely. A buzzer will sound once to indicate the system is activated. The slip indicator will also start flashing.
4-6. Using the driving support systems ■ Hill-start assist control buzzer ●When hill-start assist control is activated, the buzzer will sound once. ●In the following situations, hill-start assist control will be canceled and the buzzer will sound twice. • No attempt is made to drive the vehicle within approximately 2 seconds of releasing the brake pedal. • The parking brake is applied. • The brake pedal is depressed again. • The brake pedal has been depressed for more than approximately 3 minutes.
4-7. Driving tips 323 Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside temperatures. • Engine oil • Engine coolant • Washer fluid ● Have a service technician inspect the condition of the battery.
4-7. Driving tips When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road conditions. When parking the vehicle Park the vehicle and move the shift lever to P (Multidrive) or 1 (manual transmission) or R (multi-mode manual transmission or manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released.
4-7. Driving tips 325 ■ 215/45R17 tires Tire chains cannot be installed on 215/45R17 tires. ■ Tire chain installation Observe the following precautions when installing and removing chains: ●Install and remove tire chains in a safe location. ●Install tire chains on the front tires. Do not install tire chains on the rear tires. ●Install tire chains on front tires as tightly as possible. Retighten chains after driving 0.5 1.0 km (1/4 1/2 mile).
4-7. Driving tips NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters. ■ Fitting tire chains The tire pressure warning valves and transmitters may not function correctly when tire chains are fitted.
Audio system 5-1. Basic Operations Audio system types ...........328 Steering wheel audio switches...........................330 AUX port/USB port ............331 5-2. Using the audio system Optimal use of the audio system .............................332 5-3. Using the radio Radio operation .................334 5-4. Playing audio CDs and MP3/WMA discs CD player operation...........338 5-5. Using an external device Listening to an iPod ...........346 Listening to a USB memory device ................
5-1. Basic Operations Audio system types∗ X Vehicles with an audio system X Vehicles with a navigation/multimedia system Owners of models equipped with a navigation/multimedia system should refer to the “Navigation and multimedia system Owner’s manual”.
5-1. Basic Operations 329 ■ Using cellular phones Interference may be heard through the audio system’s speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. ■ About Bluetooth® The Bluetooth wordmark and logo are owned by Bluetooth SIG. and permission has been granted to use the trademark of the licensee Panasonic Corporation. Other trademarks and trade names are owned by various different owners.
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
5-1. Basic Operations 331 AUX port/USB port Connect an iPod, USB memory device or portable audio player to the AUX port/USB port as indicated below. Press the “MODE” button to select “iPod”, “USB” or “AUX”. Connecting using the AUX port/USB port ■ iPod Push the cover to open and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. ■ USB memory 5 Push the cover to open and connect a USB memory device.
5-2. Using the audio system Optimal use of the audio system Sound quality (treble/bass) and volume balance can be adjusted. 1 Displays the current mode 2 Changes the following settings • Sound quality and volume balance (→P. 332) The sound quality and volume balance settings can be changed to produce the best sound. • Automatic Sound Levelizer on/off (→P. 333) 3 Selects a mode Using the audio control function ■ Changing sound quality modes 1 Press the “SETUP/ENTER” button.
5-2. Using the audio system ■ Adjusting sound quality Pressing the “” button adjusts the level. Press the “” button Low High F7 to R7 Shifts to rear Shifts to front L7 to R7 Shifts to left Shifts to right Sound quality mode Mode displayed Level Bass* “Bass” -5 to 5 Treble* “Treble” -5 to 5 Front/rear volume balance “Fader” Left/right volume balance “Balance” *: The sound quality level is adjusted individually in each audio mode.
5-3. Using the radio Radio operation Select “AM” or “FM” to begin listening to the radio.
5-3. Using the radio 335 Setting station presets 1 Search for a desired station by pressing the “” button. 2 Press and hold a desired station selector button until you hear a beep. Using the station list ■ Updating the station list 1 Press “List”. The station list will be displayed. 2 Press “Update” to update the list. “Updating” is displayed while the searching is in process, and then available stations will be listed on the display. To cancel the updating process, press “Back”.
5-3. Using the radio RDS (Radio Data System) This feature allows your radio to receive RDS data. ■ Listening to stations of the same network 1 Press the “SETUP/ENTER” button. 2 Press the “” button to select “Radio” and press the “SETUP/ENTER” button. 3 Press the “” button to select the desired mode: “FM AF” or “Region code”. 4 Press the “SETUP/ENTER” button to select “On” or “Off”.
5-3. Using the radio 337 ■ EON (Enhanced Other Network) system (for traffic announcement function) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins. ■ When the battery is disconnected Station presets are erased.
5-4.
5-4. Playing audio CDs and MP3/WMA discs 339 Loading a CD, MP3 or WMA disc Insert a disc. Ejecting a CD, MP3 or WMA disc Press and remove the disc. Using the CD player ■ Selecting a track Press the “TUNE>” or “SEEK>” button to move up or the “” button to select a track.
5-4. Playing audio CDs and MP3/WMA discs Playing back an MP3 or WMA disc ■ Selecting a folder To select the desired folder, press “ ” or “ ”. ■ Selecting a folder and file from a folder list 1 Press “List”. The folder list will be displayed. 2 Press the “” button to select a folder or file. 3 Press the “SETUP/ENTER” button to open the selected file/ folder. To return to the previous display, press “Back”.
5-4. Playing audio CDs and MP3/WMA discs 341 ■ Switching the display Press “Text”. Track title, Artist name and Album title (MP3 only) are shown on the display. To return to the previous display, press “Text” or “Back”. ■ Display Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all. ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures.
5-4. Playing audio CDs and MP3/WMA discs ■ Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration. CDs with copy-protection features may not play correctly. ■ CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected.
5-4. Playing audio CDs and MP3/WMA discs 343 5 Audio system ●WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) ●Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CDRWs.
5-4. Playing audio CDs and MP3/WMA discs ●MP3 and WMA playback When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.
5-4. Playing audio CDs and MP3/WMA discs 345 NOTICE ■ Discs and adapters that cannot be used Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, Dual Discs or printable discs. Doing so may damage the player and/or disc insert/eject function. 5 Audio system ● Discs that have a diameter that is not 12 cm (4.7 in.). ● Low-quality or deformed discs. ● Discs with a transparent or translucent recording area.
5-5. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “iPod” is displayed. Connecting an iPod →P.
5-5. Using an external device 347 Selecting a play mode 1 Press “Menu” to select iPod menu mode. 2 Pressing the “TUNE>” button changes the play mode in the follow- ing order: “Playlists”→“Artists”→“Albums”→“Songs”→ “Podcasts”→“Genres”→“Composers”→“Audiobooks” 3 Press the “SETUP/ENTER” button to select the desired play mode.
5-5. Using an external device ■ Play mode list First selection Second selection Third selection Fourth selection Playlist Song - - “Artists” Artist Album Song - “Albums” Album Song - - “Songs” Song - - - Podcast Episode - - Genre Artist Album Song “Composers” Composer Album Song - “Audiobooks” Audiobook Chapter - - Play mode “Playlists” “Podcasts” “Genres” ■ Selecting a list 1 Press the “” button to display the first selection list.
5-5. Using an external device 349 Selecting a song Press the “”, “” button to select the desired song. Selecting a song from the song list 1 Press “List”. The song list will be displayed. 2 Press the “” button to select a song. 3 Press the “SETUP/ENTER” button to play the song. To return to the previous display, press “Back”. Fast-forwarding and reversing a song To fast-forward or reverse, press and hold the “SEEK>” or “
5-5. Using an external device Adjusting sound quality and volume balance 1 Press the “SETUP/ENTER” button to enter Set up menu mode. 2 Press the “” button to change sound modes. (→P. 332) ■ About iPod ●“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
5-5. Using an external device 351 ■ iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner’s Manual. ■ Display →P. 341 ■ Error messages If an error message is displayed, refer to the following table and take the appropriate measures.
5-5. Using an external device ■ Compatible models The following iPod, iPod nano, iPod classic, iPod touch and iPhone devices can be used with this system.
5-5. Using an external device 353 WARNING ■ Caution while driving Do not connect iPod or operate the controls. NOTICE ■ To prevent damage to iPod ● Do not leave the iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected. ● Do not insert foreign objects into the port.
5-5. Using an external device Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Press the “MODE” button until “USB” is displayed. Connecting a USB memory →P.
5-5.
5-5. Using an external device Selecting a folder ■ Selecting folders one at a time Press “ ” or “ ” to select the desired folder. ■ Selecting a folder and file from a folder list 1 Press “List”. The folder list will be displayed. 2 Press the “” button to select a folder or file. 3 Press the “SETUP/ENTER” button to open the selected file/ folder. To return to the previous display, press “Back”. ■ Returning to the first folder Press and hold “ ” until you hear a beep.
5-5. Using an external device 357 Switching the display Press “Text”. Track title, Artist name and Album title (MP3 only) are displayed on the display. To return to the previous display, press “Text” or “Back”. ■ USB memory functions ●Depending on the USB memory that is connected to the system, the device itself may not be operable and certain functions may not be available.
5-5. Using an external device ■ USB memory ●Compatible devices USB memory that can be used for MP3 and WMA playback ●Compatible device formats The following device formats can be used: • USB communication formats: USB 2.0 FS (12 Mbps) • File formats: FAT12/16/32 (Windows) • Correspondence class: Mass storage class MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
5-5. Using an external device 359 5 Audio system ●WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz) • Compatible bit rates HIGH PROFILE 32-320 (kbps, CBR) ●File names The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ●ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.
5-5. Using an external device WARNING ■ Caution while driving Do not connect USB memory or operate the controls. NOTICE ■ To prevent damage to USB memory ● Do not leave USB memory in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the device. ● Do not push down on or apply unnecessary pressure to the USB memory while it is connected. ● Do not insert foreign objects into the port.
5-5. Using an external device 361 Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Press the “MODE” button until “AUX” is displayed. Connecting a portable player →P. 331 ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself.
5-6. Using Bluetooth® devices Bluetooth® audio/phone The following can be performed using Bluetooth® wireless communication: ■ Bluetooth® audio The Bluetooth® audio system enables you to enjoy music on a portable player from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system cannot be used.
5-6. Using Bluetooth® devices 363 Device registration/connection flow 1. Register a Bluetooth® device to be used with the audio system (→P. 368) 2. Connect a registered Bluetooth® device to be used (→P. 369, 370) 3. Set automatic connection of the device (→P. 372) 4. Check the Bluetooth® connection condition (→P. 364) 5. Use Bluetooth® audio (→P. 379) To be used for hands-free phone 5. Use Bluetooth® phone (→P.
5-6. Using Bluetooth® devices Audio unit ® 1 Bluetooth connection status If “BT” is not displayed, the cannot Bluetooth® audio/phone be used. 2 Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed.
5-6.
5-6.
5-6. Using Bluetooth® devices 367 Using the steering wheel switches∗ The steering wheel switches can be used to operate a connected cellular phone or portable digital audio player (portable player). Operating a Bluetooth® phone using the steering wheel switches 1 Volume The voice guidance volume cannot be adjusted using these buttons.
5-6. Using Bluetooth® devices Registering a Bluetooth® device Before using the Bluetooth® audio/phone, it is necessary to register a Bluetooth® device in the system. You can register up to 5 Bluetooth® devices. How to register a Bluetooth® device 1 Press the “SETUP/ENTER” button and select “Bluetooth*” using the “” button. *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. 2 Press the “SETUP/ENTER” button and select “Pairing” using the “” button.
5-7. “SET UP” menu 369 Using the “SET UP” menu (“Bluetooth*” menu) Registering a Bluetooth® device in the system allows the system to function. The following functions can be used for registered devices: *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. Registering a portable player Select “Pairing” using the “” and “SETUP/ ENTER” buttons (→P. 365), and perform the procedure for registering a portable player. (→P.
5-7. “SET UP” menu ● Disconnecting the registered cellular phone from the audio system 1 Select the name of the cellular to be disconnected using the “” and “SETUP/ENTER” buttons. 2 Select “Disconnect” using the “” and “SETUP/ENTER” buttons. 3 Press “Yes”. Listing the registered portable players Select “List audio” using the “” and “SETUP/ ENTER” buttons. (→P. 365) The list of registered portable players will be displayed.
5-7. “SET UP” menu 371 ● Disconnecting the registered portable player from the audio system 1 Select the name of the portable player to be disconnected using the “” and “SETUP/ENTER” buttons. 2 Select “Disconnect” using the “” and “SETUP/ENTER” buttons. 3 Press “Yes”. ● Selecting the connection method 1 Select the name of the desired portable player using the “” and “SETUP/ENTER” buttons.
5-7. “SET UP” menu Setting automatic connection of the device on or off If “BT power” is set to on, the registered device will be connected automatically when the engine switch is turned to the “ACC” position (vehicles without a smart entry & start system) or ACCESSORY mode (vehicles with a smart entry & start system). 1 Select “BT power” using the “” and “SETUP/ ENTER” buttons. (→P. 365) 2 Select “On” or “Off” using the “SETUP/ENTER” button.
5-7. “SET UP” menu 373 Initialization Select “Reset” using the “” and “SETUP/ENTER” buttons. (→P. 365) ● Initializing the sound settings Select “Sound settings” using the “” and “SETUP/ENTER” buttons and press “Yes”. For details about sound settings: →P. 377 ● Initializing the device information Select “Car Device Info” using the “” and “SETUP/ENTER” buttons and press “Yes”.
5-7. “SET UP” menu Using the “SET UP” menu (“Phone” menu) Adding a new phone number Select “Add contacts” using the “” and “SETUP/ ENTER” buttons. (→P. 365) ● Transferring all contacts from the cellular phone Select “Overwrite all” using the “” and “SETUP/ ENTER” buttons and press “Yes”. ● Transferring one contact from the cellular phone Select “Add contact” using the “” and “SETUP/ ENTER” buttons and press “Yes”.
5-7. “SET UP” menu Deleting call histories Select “Delete call history” using the “” and “SETUP/ENTER” buttons. (→P. 365) ● Deleting outgoing call history 1 Select “Outgoing calls” using the “” and “SETUP/ENTER” buttons. 2 Select the desired phone number using the “” and “SETUP/ENTER” buttons and press To delete all outgoing call history data, press press “Yes”. “All” and then “Yes”.
5-7. “SET UP” menu ● Deleting missed call history 1 Select “Missed calls” using the “” and “SETUP/ENTER” buttons. 2 Select the desired phone number using the “” and “SETUP/ENTER” buttons and press To delete all missed call history data, press press “Yes”. “All” and then “Yes”. ● Deleting a number from all call histories (Outgoing calls, Incoming calls and Missed calls) 1 Select “All calls” using the “” and “SETUP/ ENTER” buttons.
5-7. “SET UP” menu 377 Deleting a registered phone number 1 Select “Delete contacts” using the “” and “SETUP/ENTER” buttons. (→P. 365) 2 Select the desired phone number using the “” and “SETUP/ENTER” buttons and press “Yes”. To delete all of the registered phone numbers, Press and then press “All” “Yes”. Press “A-Z” to display the registered names in alphabetical order of the initial.
5-7. “SET UP” menu Setting ringtone volume 1 Select “Ringtone volume” using the “” and “SETUP/ENTER” buttons. (→P. 365) 2 Change the ringtone volume. To decrease the volume: Press the “” button. To set the volume, press “Back”. Setting ringtone 1 Select “Ringtone” using the “” and “SETUP/ ENTER” buttons. (→P. 365) 2 Using the “” button, select a ringtone (1 - 3).
5-8.
5-8. Bluetooth® Audio Selecting an album Press “ ” or “ ” to select the desired album. Selecting a track Press the “SEEK>” or “” or “
5-8. Bluetooth® Audio 381 Repeat play Pressing “RPT” changes the repeat play mode in the following order: Track repeat → Album repeat → Off Switching the display Press “Text”. Track title and artist name are displayed on the display. To return to the previous display, press “Text” or “Back”. ■ Bluetooth® audio system functions Depending on the portable player that is connected to the system, certain functions may not be available.
5-9. Bluetooth® Phone Making a phone call To enter the “PHONE” or “TEL” mode, press the off-hook switch. Dialing by selecting a name 1 Select “Phonebook” using the “” and “SETUP/ ENTER” buttons. 2 Select the desired name using the “” and “SETUP/ENTER” buttons and press the off-hook switch. By pressing “Add S. Dial” and then one of the speed dial buttons while the desired name is selected, the selected item can be registered as a speed dial.
5-9. Bluetooth® Phone 383 Dialing from call histories 1 Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using the “” and “SETUP/ENTER” buttons. 2 Select the desired number using the “” and “SETUP/ENTER” buttons and press the off-hook switch. The following operations can be performed: ● Registering a number as a speed dial Press “Add S. Dial” and then press the desired preset button. ● Deleting the selected number Press “Delete” and press “Yes”.
5-9. Bluetooth® Phone Receiving a phone call Answering the phone Press the off-hook switch. Refusing a call Press the on-hook switch. Receiving a call when on another call Press the off-hook switch. Pressing the off-hook switch again returns you to the previous call. Adjusting the ringtone volume when receiving a call Change the ringtone volume using the “VOL-” or “VOL+” button. To decrease the volume: Press the “VOL-” button. To increase the volume: Press the “VOL+” button.
5-9. Bluetooth® Phone 385 Speaking on the phone Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone. b. Press * “Phone”. *: This operation can be performed only when transferring a call from the cellular phone to the system during a call. Muting your voice Press “Mute”.
5-9. Bluetooth® Phone ■ When talking on the phone ●Do not talk at the same time as the other party. ●Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 80 km/h (50 mph) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 70 km/h (43 mph) or less. ■ Phone call system functions Depending on the cellular phone, certain functions may not be available.
5-10. Bluetooth® 387 Bluetooth® ■ When using the Bluetooth® audio/Phone ●In the following situations, the system may not function.
5-10.
5-10.
5-10. Bluetooth® WARNING ■ While driving Do not operate the portable audio player, cellular phone or connect a device to the Bluetooth® system. ■ Caution regarding interference with electronic devices ● Your audio unit is fitted with Bluetooth® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas.
Interior features 6 6-1. Using the air conditioning system and defogger Manual air conditioning system .............................392 Automatic air conditioning system .........399 Power heater .....................409 Seat heaters ......................411 6-2. Using the interior lights Interior lights list.................413 • Front interior light/ personal lights ...............414 • Vanity lights ...................414 • Rear interior light ...........415 6-3.
6-1.
6-1. Using the air conditioning system and defogger 393 ■ Adjusting the temperature setting X Vehicles without the button To adjust the temperature setting, turn the temperature control dial clockwise to increase the temperature. X Vehicles with the button To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air.
6-1. Using the air conditioning system and defogger Other functions ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (indicator off) and recirculated air mode (indicator on) each time is pressed. ■ Defogging the windshield Defoggers are used to defog the windshield and front side windows. Set the air outlet selector dial to the position.
6-1. Using the air conditioning system and defogger 395 ■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the windshield and wiper blades. Press the switch to turn the system on/off. The indicator comes on when the windshield wiper de-icer is on. The windshield de-icer will automatically turn off after a period of time. Air outlets ■ Location of air outlets The air outlets and air volume changes according to the selected airflow mode.
6-1. Using the air conditioning system and defogger X Front side outlets Direct air flow to the left or right, up or down. 1 Open the vent 2 Close the vent ■ Fogging up of the windows ●Vehicles with the button: The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively. ●Vehicles with the button: If you turn off, the windows may fog up more easily.
6-1. Using the air conditioning system and defogger 397 ■ Ventilation and air conditioning odors ●To let fresh air in, set the air conditioning system to the outside air mode. ●During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. ●To reduce potential odors from occurring: It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
6-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not set the air outlet selector dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. ● Do not place anything on the instrument panel which may cover the air outlets.
6-1. Using the air conditioning system and defogger 399 Automatic air conditioning system∗ Air outlets and fan speed are automatically adjusted according to the temperature setting. The illustrations below are for left-hand drive vehicles. The button positions and shapes will differ for right-hand drive vehicles. Also, the display and button positions will differ depending on the type of the system.
6-1.
6-1. Using the air conditioning system and defogger 401 ■ Change the airflow mode To change the airflow mode, move the airflow change knob upward or downward. The air outlets used are changed each time the knob is operated. 1 Air flows to the upper body. 2 Air flows to the upper body and feet. 3 Air flows to the feet. 4 Air flows to the feet and the windshield ates. defogger Airflow change knob oper- Using automatic mode 1 Press . The dehumidification function begins to operate.
6-1. Using the air conditioning system and defogger ■ Adjusting the temperature for driver and front passenger seats separately To turn on the dual control mode, perform any of the following procedures: ● Press . ● Adjust the front passenger side temperature setting. The indicator comes on when the dual control mode is on. Other functions ■ Switching between outside air and recirculated air modes X Vehicles without a blower customize function Press to change to recirculated air mode.
6-1. Using the air conditioning system and defogger 403 ■ Defogging the windshield Defoggers are used to defog the windshield and front side windows. Press . The dehumidification function operates and fan speed increases. Set the outside/recirculated air mode button to the outside air mode if the recirculated air mode is used. (It may switch automatically.) To defog the windshield and the front side windows early, turn the air flow and temperature up.
6-1. Using the air conditioning system and defogger ■ Blower customization (if equipped) Fan speed settings can be changed. 1 Press . 2 Press . 3 Each time is pressed, the fan speed changes as follows. “MEDIUM”→“SOFT”→“FAST” ■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the windshield and wiper blades. Press the switch to turn the system on/off. The indicator comes on when the windshield wiper de-icer is on.
6-1. Using the air conditioning system and defogger 405 ■ Adjusting the position of and opening and closing the air out- lets X Front center outlets 1 Direct air flow to the left or right, up or down. 2 Turn the knob up to open the vent and down to close the vent. X Front side outlets Direct air flow to the left or right, up or down.
6-1. Using the air conditioning system and defogger ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed. ■ Fogging up of the windows ●The windows will easily fog up when the humidity in the vehicle is high. Turning or on will dehumidify the air from the outlets and defog the windshield effectively.
6-1. Using the air conditioning system and defogger 407 ■ Air conditioning system operations when the engine is stopped due to the Stop & Start system (vehicles with a Stop & Start system) When the engine is stopped due to Stop & Start system operation, the air conditioning cooling, heating and dehumidification functions turn off and only ambient temperature air is blown, and there is a possibility that the blowing of ambient temperature air will stop.
6-1. Using the air conditioning system and defogger WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. ● Do not place anything on the instrument panel which may cover the air outlets.
6-1. Using the air conditioning system and defogger 409 Power heater∗ This feature is used to keep the cab warm in cold conditions. On/off The power heater turns on about 30 seconds after you press the switch and it takes about another 55 seconds to warm up. ∗: If equipped 6 Interior features ■ Power heater can be operated when The engine is running.
6-1. Using the air conditioning system and defogger WARNING ■ To prevent burns or damage to your vehicle ● Do not touch the heater or its exhaust pipe as they are hot. You may burn yourself. ● Keep flammable items such as fuel away from the heater and its exhaust pipe. This may cause a fire. NOTICE ■ To prevent damage to your vehicle ● Do not turn the heater on and off repeatedly in 5 minute intervals as this can shorten the life of the heater components.
6-1. Using the air conditioning system and defogger 411 Seat heaters∗ WARNING ● Care should be taken to prevent injury if anyone in the following categories comes in contact with the seats when the heater is on: • Babies, small children, the elderly, the sick and the physically challenged • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.
6-1. Using the air conditioning system and defogger ■ The seat heaters can be used when X Vehicles without a smart entry & start system The engine switch is in the “ON” position. X Vehicles with a smart entry & start system The engine switch is in IGNITION ON mode. ■ When not in use Put the switch in the neutral position. The indicator will turn off.
6-2. Using the interior lights 413 Interior lights list 1 Vanity lights (if equipped) (→P. 414) 2 Front interior light/personal lights (→P. 414) 6 3 Rear interior light (→P.
6-2. Using the interior lights Front interior light/personal lights ■ Front interior light 1 Door position 2 Off ■ Personal lights On/off When a light is on due to its door link switch, the light will not turn off even if the lens is pressed.
6-2. Using the interior lights 415 Rear interior light 1 On 2 Door position 3 Off 6 Interior features ■ Illuminated entry system X Vehicles without a smart entry & start system When the interior light switch is in the door position, the interior light automatically turns on/off according to the engine switch position, whether the doors are locked/unlocked and whether the doors are open/closed.
6-3. Using the storage features List of storage features 1 Auxiliary boxes (→P. 420) 4 Cup holders (→P. 419) 2 Glove box (→P. 417) 5 Console box (→P. 417) 3 Bottle holders (→P. 418) WARNING ● Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: • Glasses may be deformed by heat or cracked if they come into contact with other stored items. • Lighters or spray cans may explode.
6-3. Using the storage features 417 Glove box Pull up the lever to open the glove box. The glove box light turns on when the tail lights are on. Console box X Console box X Upper level box 6 Lift the lid while pulling up the knob on the left side. ■ When using the console box lid as an armrest (sliding type only) If necessary, the console box lid can be slid forward. Pull the lid forward by grasping the front of the lid. Interior features Lift the lid while pulling up the knob on the right side.
6-3. Using the storage features Bottle holders X Front X Rear ●When storing a bottle, close the cap. ●The bottle may not be stored depending on its size or shape. WARNING Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. NOTICE Put the cap on before stowing a bottle. Do not place open bottles in the bottle holders, or glass or paper cups containing liquid.
6-3. Using the storage features 419 Cup holders X Front X Rear (if equipped) Pull the armrest down. ■ Adjusting the size of the cup holder (front) 1 Remove the cup holder insert. 2 Change the cup holder insert position. 6 Interior features ■ Removing the cup holder insert (front) The cup holder insert may be removed for cleaning.
6-3. Using the storage features WARNING Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury. If possible, cover hot drinks to prevent burns. Auxiliary boxes X Type A Push the lid to open. X Type C Pull the lid to open. X Type B Pull the tab to open.
6-3. Using the storage features 421 WARNING ● Keep the auxiliary boxes closed. In the event of sudden braking, an accident may occur due to an occupant being struck by an open auxiliary box or the items stored inside. ● Type A only: Do not store items heavier than 0.2 kg (0.4 lb.). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
6-3. Using the storage features Trunk features Grocery bag hook NOTICE Do not hang any object heavier than 3 kg (6.6 lb.).
6-4. Other interior features 423 Other interior features Sun visors 1 To set the visor in the forward position, flip it down. 2 To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Open the cover. 6 The clock can be adjusted.
6-4. Other interior features ■ The clock is displayed when X Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. X Vehicles with a smart entry & start system The engine switch is in ACCESSORY or IGNITION ON mode. ■ When the battery is disconnected The clock data will be reset. Power outlets Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). X Front After pulling the lid to open, open the cover.
6-4. Other interior features 425 Armrest (if equipped) Fold down the armrest for use. NOTICE To prevent damage to the armrest, do not apply too much load on the armrest. Coat hook The coat hook is provided with the rear assist grip (driver’s side). 6 Do not hang coat hangers or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
6-4. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. 1 Front 2 Rear WARNING Do not use the assist grip when getting in or out of the vehicle or rising from your seat. NOTICE To prevent damage to the assist grip, do not put a heavy load on the assist grip.
Maintenance and care 7 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..........428 Cleaning and protecting the vehicle interior ...........432 7-2. Maintenance Maintenance requirements....................435 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......................438 Hood ..................................441 Positioning a floor jack.......443 Engine compartment..........444 Tires...................................460 Tire inflation pressure ..
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water.
7-1. Maintenance and care 429 ■ When using a car wash (vehicles with a smart entry & start system) If the door handle becomes wet while the electronic key is within the effective range, the door may lock and unlock repeatedly. In that case, follow the following correction procedures to wash the vehicle: ●Place the key in a position 2 m (6 ft.) or more separate from the vehicle while the vehicle is being washed. (Take care to ensure that the key is not stolen.
7-1. Maintenance and care WARNING ■ When washing the vehicle Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components etc. to catch fire. ■ When cleaning the windshield (vehicles with rain-sensing windshield wipers) Set the wiper switch to off. If the wiper switch is in “AUTO”, the wipers may operate unexpectedly in the following situations, and may result in hands being caught or other serious injuries and cause damage to the wiper blades.
7-1. Maintenance and care 431 NOTICE 7 Maintenance and care ■ To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.
7-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ● Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. ● If dirt cannot be removed, wipe it off with a soft cloth dampened with neutral detergent diluted to approximately 1%.
7-1. Maintenance and care 433 ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible.
7-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach • Seats: Alkaline or acidic solutions, such as thinner, benzene, and alcohol ● Do not use polish wax or polish cleaner. The instrument panel’s or other interior part’s painted surface may be damaged.
7-2. Maintenance 435 Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance are essential. Toyota recommends the following maintenance: Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule. For full details of your maintenance schedule, refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.
7-2. Maintenance ■ Where to go for maintenance service? In order to maintain your vehicle in the best possible condition, Toyota recommends that maintenance service operations as well as other inspections and repairs be carried out by authorized Toyota dealers or repairers or other duly qualified and equipped professionals.
7-2. Maintenance 437 WARNING ■ If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible serious injury or death. ■ Handling of the battery Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (→P.
7-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections. Items Parts and tools • Baking soda • Grease Battery condition • Warm water (→P.
7-3. Do-it-yourself maintenance 439 WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt. ● Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driving as they may be hot.
7-3. Do-it-yourself maintenance WARNING ■ When working near the electric cooling fan or radiator grille Vehicles without a smart entry & start system: Be sure the engine switch is off. With the engine switch in the “ON” position, the electric cooling fan may automatically start to run if the air conditioning is on and/or the coolant temperature is high. (→P. 453) Vehicles with a smart entry & start system: Be sure the engine switch is off.
7-3. Do-it-yourself maintenance 441 Hood Release the lock from the inside of the vehicle to open the hood. 1 Pull the hood lock release lever. The hood will pop up slightly. 2 Pull up the auxiliary catch lever and lift the hood. 3 Hold the hood open by inserting the support rod into the slot.
7-3. Do-it-yourself maintenance WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■ After installing the support rod into the slot Make sure the rod supports the hood securely preventing it from falling down onto your head or body. NOTICE ■ When closing the hood Be sure to return the support rod to its clip before closing the hood.
7-3. Do-it-yourself maintenance 443 Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury.
7-3. Do-it-yourself maintenance Engine compartment X 1NR-FE engine 1 Washer fluid tank (→P. 457) 5 Battery (→P. 454) 2 Engine coolant reservoir 6 Fuse box (→P. 483) (→P. 452) 3 Engine oil filler cap (→P. 449) 4 Engine oil level dipstick (→P. 447) 7 Electric cooling fan 8 Condenser (→P. 453) 9 Radiator (→P.
7-3. Do-it-yourself maintenance X 445 1ZR-FAE engine 1 Washer fluid tank (→P. 457) 5 Battery (→P. 454) 2 Engine coolant reservoir 6 Fuse box (→P. 483) (→P. 452) 3 Engine oil filler cap (→P. 449) 4 Engine oil level dipstick (→P. 447) 7 Electric cooling fan 8 Condenser (→P. 453) 9 Radiator (→P.
7-3. Do-it-yourself maintenance X 1ND-TV engine 1 Washer fluid tank (→P. 457) 5 Fuel filter (→P. 458) 2 Engine coolant reservoir 6 Battery (→P. 454) 7 Fuse box (→P. 483) 8 Radiator (→P. 453) (→P. 452) 3 Engine oil filler cap (→P. 449) 4 Engine oil level dipstick (→P. 447) 9 Electric cooling fan 10 Condenser (→P. 453) 11 Intercooler (→P.
7-3. Do-it-yourself maintenance 447 Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil 1 Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine. 2 Holding a rag under the end, pull the dipstick out. X 1NR-FE engine X 1ND-TV engine X 1ZR-FAE engine 7 4 Flat dipstick: Reinsert the dipstick fully.
7-3. Do-it-yourself maintenance 4 Non-flat dipstick: Reinsert the non-flat dipstick fully with its protruding areas ( 1 in the illustration) pointing towards the engine. 5 Holding a rag under the end, pull the dipstick out and check the oil level. 1 Low 2 Normal 3 Excessive X Flat dipstick X Non-flat dipstick The shape of the dipstick may differ depending on the type of vehicle or engine. 6 Wipe the dipstick and reinsert it fully.
7-3. Do-it-yourself maintenance 449 ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. Make sure to check the oil type and prepare the items needed before adding oil. Engine oil selection →P. 598 X 1ND-TV engine (except for Turkey) Oil quantity (Low → Full) 1.3 L (1.4 qt., 1.1 Imp. qt.) X Others 1.5 L (1.6 qt., 1.3 Imp. qt.) Items Clean funnel 1 Remove the oil filler cap by turning it counterclockwise.
7-3. Do-it-yourself maintenance ■ When adding engine oil (diesel engine only) Do not overfill the engine. Use the dipstick to ensure that the oil level does not exceed the full mark. If exceeded, the oil level will have to be adjusted to below the full mark. ■ Engine oil consumption A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals.
7-3. Do-it-yourself maintenance 451 X Vehicles with a multi-information display 1 Switch the display to the trip meter “A” when the engine is running. (→P. 103) 2 Turn the engine switch off. 3 Vehicles without a smart entry & start system: While pressing the “TRIP” switch (→P. 103), turn the engine switch to the “ON” position (do not start the engine because reset mode will be canceled). Continue to press and hold the switch until the trip meter displays “00000”.
7-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. 1 Reservoir cap 2 “FULL” line 3 “LOW” line If the level is on or below the “LOW” line, add coolant up to the “FULL” line.
7-3. Do-it-yourself maintenance 453 NOTICE ■ When adding coolant Coolant is neither plain water nor straight antifreeze. The correct mixture of water and antifreeze must be used to provide proper lubrication, corrosion protection and cooling. Be sure to read the antifreeze or coolant label. ■ If you spill coolant Be sure to wash it off with water to prevent it from damaging parts or paint.
7-3. Do-it-yourself maintenance Battery Check the battery as follows. ■ Caution symbols The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked flames, no sparks Battery acid Shield eyes Note operating instructions Keep away from children Explosive gas ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps.
7-3. Do-it-yourself maintenance 455 ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, observe the following before recharging: ●If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable. ●Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ● Do not cause sparks by touching the battery terminals with tools. ● Do not smoke or light a match near the battery. ● Avoid contact with eyes, skin and clothes. ● Never inhale or swallow electrolyte.
7-3. Do-it-yourself maintenance 457 Washer fluid X Type A If the fluid level is extremely low add washer fluid. Raise the cap keeping your finger pressed down on the hole in the center and check the fluid level in the tube. X Type B Add washer fluid in the following situations: ● A washer does not work. ● Vehicles with a drive monitor display: The windshield low washer fluid warning light (if equipped) comes on. (→P.
7-3. Do-it-yourself maintenance NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary. Refer to the freezing temperatures listed on the label of the washer fluid bottle. Fuel filter (diesel engine only) You may drain the fuel filter yourself.
7-3. Do-it-yourself maintenance 459 4 Operate the priming pump until fuel begins to run out. 5 After draining, tighten the drain plug by hand.
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance schedules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread. Check the spare tire condition and pressure if not rotated. 1 New tread 2 Worn tread 3 Treadwear indicator The location of treadwear indicators is shown by a “TWI” or “∆” mark, etc., molded into the sidewall of each tire.
7-3. Do-it-yourself maintenance 461 Tire rotation Rotate the tires in the order shown. To equalize tire wear and help extend tire life, Toyota recommends that you rotate your tires approximately every 10000 km (6000 miles). Front Tire pressure warning system Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P.
7-3. Do-it-yourself maintenance ◆ Initializing the tire pressure warning system ■ The tire pressure warning system must be initialized in the fol- lowing circumstances: ● When changing the tire size. ● When the tire inflation pressure is changed such as when changing traveling speed or load weight. When the tire pressure warning system is initialized, the current tire inflation pressure is set as the benchmark pressure.
7-3. Do-it-yourself maintenance 463 5 Vehicles without a smart entry & start system: Wait for a few min- utes with the engine switch in the “ON” position and then turn the engine switch to the “ACC” or “LOCK” position. Vehicles with a smart entry & start system: Wait for a few minutes with the engine switch in IGNITION ON mode and then turn the engine switch off. ◆ Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code.
7-3. Do-it-yourself maintenance ■ Low profile tires (17-inch tires) Generally, low profile tires will wear more rapidly and tire grip performance will be reduced on snowy and/or icy roads when compared to standard tires. Be sure to use snow tires or tire chains* on snowy and/or icy roads and drive carefully at a speed appropriate for road and weather conditions. *: Tire chains cannot be mounted on 215/45R17 tires.
7-3. Do-it-yourself maintenance 465 ■ If you press the tire pressure warning reset switch accidentally If initialization is performed, adjust the tire inflation pressure to the specified level and initialize the tire pressure warning system again. ■ When initialization of the tire pressure warning system has failed Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly.
7-3.
7-3.
7-3.
7-3.
7-3.
7-3. Do-it-yourself maintenance 471 WARNING ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train as well as dangerous handling characteristics, which may lead to an accident resulting in death or serious injury. ● Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota.
7-3. Do-it-yourself maintenance NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves, transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as the tire pressure warning valves and transmitters may be damaged if not handled correctly.
7-3. Do-it-yourself maintenance 473 Tire inflation pressure Make sure to maintain proper tire inflation pressure. Tire inflation pressure should be checked at least once per month. However, Toyota recommends that tire inflation pressure be checked once every two weeks. (→P. 606) Tire-loading information label Tire inflation pressure is specified on the label on the driver’s side pillar as shown.
7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ●Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1.5 km or 1 mile, you will get an accurate cold tire inflation pressure reading. ●Always use a tire pressure gauge. It is difficult to judge if a tire is properly inflated based only on its appearance.
7-3. Do-it-yourself maintenance 475 Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*. Replacement wheels are available at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3. Do-it-yourself maintenance ■ When removing the wheel ornament (vehicles with the wheel cap clip) Remove the wheel ornament using the wheel cap clip. WARNING ■ When replacing wheels ● Do not use wheels that are a different size from those recommended in the Owner’s Manual, as this may result in a loss of handling control. ● Never use an inner tube in a leaking wheel which is designed for a tubeless tire. Doing so may result in an accident, causing death or serious injury.
7-3. Do-it-yourself maintenance 477 NOTICE ■ Replacing tire pressure warning valves and transmitters ● Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or other qualified service shop.
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method 1 Turn the engine switch off. 2 Open the glove box. Slide off the damper. 3 Push in the glove box on the vehicle’s outer side to disconnect the claws. Then pull out the glove box and disconnect the lower claws. 4 Remove the filter cover.
7-3. Do-it-yourself maintenance 479 ■ Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.
7-3. Do-it-yourself maintenance Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted or “Key battery low.” is displayed on the multi-information display (vehicles with a multi-information display).
7-3. Do-it-yourself maintenance X 481 Vehicles with a smart entry & start system 1 Release the lock and take out the mechanical key. 2 Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag. 3 Remove the depleted battery.
7-3. Do-it-yourself maintenance ■ Use a CR2016 (vehicles without a smart entry & start system) or CR2032 (vehicles with a smart entry & start system) lithium battery ●Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, local electrical appliance shops or camera stores. ●Replace only with the same or equivalent type recommended by the manufacturer. ●Dispose of used batteries according to local laws.
7-3. Do-it-yourself maintenance 483 Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1 Turn the engine switch off. 2 Open the fuse box cover. X Engine compartment Push the tab in and lift the lid off.
7-3. Do-it-yourself maintenance X Driver’s side instrument panel (left-hand drive vehicles) Under the lower instrument panel: Remove the lid. Behind the auxiliary box: 1 Open the auxiliary box. Push in each side of the auxiliary box to disconnect the upper claws. 2 Pull out the auxiliary box and disconnect the lower claws.
7-3. Do-it-yourself maintenance X 485 Passenger’s side instrument panel (right-hand drive vehicles) Under the lower instrument panel: Remove the cover and the lid. Behind the glove box: 1 Open the glove box. Slide off the damper. 2 Push in each side of the glove 7 Maintenance and care box disconnect the upper claws. Then pull out the glove box and disconnect the lower claws.
7-3. Do-it-yourself maintenance 3 Remove the fuse with the pull- out tool. Only type A fuses can be removed using the pullout tool. 4 Check if the fuse is blown. 1 Normal fuse 2 Blown fuse Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
7-3. Do-it-yourself maintenance 487 ■ After a fuse is replaced ●If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (→P. 488) ●If the replaced fuse blows again, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. ■ If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
7-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (→P.
7-3.
7-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams (bulb type) 1 Turn the bulb base counter- clockwise. 2 Pull the bulb out while press- ing the lock release of the connector. 3 Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert. 4 Turn and secure the bulb base.
7-3. Do-it-yourself maintenance 491 ■ Headlight high beams (bulb type) 1 Turn the bulb base counter- clockwise. 2 Pull the bulb out while press- ing the lock release of the connector. 3 Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert. 7 base. Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
7-3. Do-it-yourself maintenance ■ Front fog light (if equipped) 1 Remove the fender liner bolts and clip. 2 Remove the fender liner. 3 Unplug the connector while depressing the lock release. 4 Turn the bulb base counter- clockwise.
7-3. Do-it-yourself maintenance 493 5 Install a new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn clockwise and secure the bulb base. 6 Install the connector. Shake the connector gently to check that it is not loose, turn the front fog lights on once and visually confirm that no light is leaking through the mounting. 7 7 When installing the fender liner, install by conducting 2 and 1 Make sure that the fender liner is attached to the inside of the bumper.
7-3. Do-it-yourself maintenance ■ Front turn signal light 1 Turn the bulb base counter- clockwise. 2 Remove the light bulb. 3 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance 495 ■ Stop/tail light (bulb type) and rear turn signal light 1 Open the trunk remove the clips. lid and To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. 2 Partly remove the luggage trim cover. 3 Turn the bulb base counter- clockwise. 1 Rear turn signal light 2 Stop/tail light 7 1 Rear turn signal light 2 Stop/tail light 5 When installing, reverse the steps listed. Maintenance and care 4 Remove the light bulb.
7-3. Do-it-yourself maintenance ■ Rear fog light (bulb type), tail light (bulb type) and back-up light 1 Open the trunk lid and remove the clip. Then partly remove the trunk panel cover. To prevent damage to the vehicle, cover the tip of the screwdriver with a rag. 2 Turn the bulb base counter- clockwise. 1 Tail light 2 Rear fog light 3 Back-up light 3 Remove the light bulb. 1 Tail light 2 Rear fog light 3 Back-up light 4 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance 497 ■ License plate light 1 Remove the lens. Insert a properly sized screwdriver into the hole of the lens, and pry off the lens as shown in the illustration. To prevent damaging the vehicle, wrap the screwdriver with a tape. 2 Remove the light bulb. 3 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance ■ Side turn signal light 1 Remove the cover. Insert the flathead screwdriver and slide along the side turn signal light. To prevent damaging the vehicle, wrap the flathead screwdriver with a tape. 2 Press on the 2 clips and remove the side turn signal light from the visor housing. 3 Remove the socket from the side turn signal light housing. 4 Remove the bulb.
7-3. Do-it-yourself maintenance 499 5 Replace the bulb and install the socket to the side turn signal light housing. Align the grooves of the socket to the side turn signal light housing. 6 With the wire harness pass- ing through the lower part of the side turn signal light, install it to the visor housing. 7 Align the 6 tabs and install the cover. After hearing a click sound, confirm that the cover is secure.
7-3. Do-it-yourself maintenance ■ Replacing the following bulbs If any of the lights listed below has burnt out, have it replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
When trouble arises 8-1. Essential information Emergency flashers...........502 If your vehicle has to be stopped in an emergency.......................503 8-2. Steps to take in an emergency If your vehicle needs to be towed ..........................505 If you think something is wrong ...........................511 Fuel pump shut off system .............................512 If a warning light turns on or a warning buzzer sounds .............................513 If a warning message is displayed .......
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. ■ Emergency flashers If the emergency flashers are used for a long time while the engine is not operating, the battery may discharge.
8-1. Essential information 503 If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: 1 Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle. 2 Shift the shift lever to N.
8-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine. ● Vehicles without a smart entry & start system: Never attempt to remove the key, as doing so will lock the steering wheel.
8-2. Steps to take in an emergency 505 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
8-2. Steps to take in an emergency Towing with a wheel-lift type truck X From the front Release the parking brake. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. X From the rear Use a towing dolly under the front wheels.
8-2. Steps to take in an emergency 507 Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for at most 80 km (50 miles) at under 30 km/h (18 mph). A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition.
8-2. Steps to take in an emergency 4 Tighten down the towing eyelet securely using a wheel nut wrench or hard metal bar. 5 Securely attach cables or chains to the towing eyelet. Take care not to damage the vehicle body. 6 Vehicles without a smart entry & start system: Enter the vehicle being towed and start the engine. If the engine does not start, turn the engine switch to the “ON” position. Vehicles with a smart entry & start system: Enter the vehicle being towed and start the engine.
8-2. Steps to take in an emergency 509 WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground. If the vehicle is towed with the front wheels contacting the ground, the drivetrain and related parts may be damaged. ■ While towing ● When towing using cables or chains, avoid sudden starts, etc.
8-2. Steps to take in an emergency NOTICE ■ To prevent causing serious damage to the Stop & Start system when towing (vehicles with a Stop & Start system) Never tow this vehicle with four wheels on the ground. Use a flatbed truck, or lift up front or rear of the vehicle by using a wheel-lift type truck.
8-2. Steps to take in an emergency 511 If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Visible symptoms ● Fluid leaks under the vehicle. (Water dripping from the air conditioning after use is normal.
8-2. Steps to take in an emergency Fuel pump shut off system (gasoline engine) To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated. X Vehicles without a smart entry & start system 1 Turn the engine switch to the “ACC” or “LOCK” position. 2 Restart the engine.
8-2. Steps to take in an emergency 513 If a warning light turns on or a warning buzzer sounds Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Multi-mode manual transmission warning light*3 Indicates a malfunction in the multi-mode manual transmission system. → Have the system checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency Warning light 515 Warning light/Details/Actions ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS (Electric Power Steering) system.
8-2. Steps to take in an emergency Warning light (If equipped) (Flashes) (If equipped) (If equipped) (Comes on in yellow) (If equipped) Warning light/Details/Actions PCS warning light When the warning light flashes (and a buzzer sounds): Indicates a malfunction in the PCS (Pre-Crash Safety system) → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
8-2. Steps to take in an emergency Warning light (Comes on in yellow) (If equipped) (Flashes in yellow for 15 seconds) (If equipped) (If equipped) 517 Warning light/Details/Actions Speed limiter indicator Indicates a malfunction in the speed limiter. → Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. Smart entry & start system indicator light Indicates a malfunction in the smart entry & start system.
8-2. Steps to take in an emergency Warning light (If equipped) (If equipped) (If equipped) Warning light/Details/Actions DPF system warning light • Indicates that the DPF catalytic converter needs to be cleaned due to repeated short trips and/or low-speed driving. • Indicates that the amount of accumulated deposits in the DPF catalytic converter has reached the specified level.
8-2. Steps to take in an emergency Warning light 519 Warning light/Details/Actions Tire pressure warning light When the light comes on: Low tire inflation pressure such as • Natural causes (→P. 522) • Flat tire (→P. 532, 555) → Adjust the tire inflation pressure to the specified level. The light will turn off after a few minutes.
8-2. Steps to take in an emergency Follow the correction procedures. (vehicles with a smart entry & start system and with a drive monitor display) After taking the specified steps to correct the suspected problem, check that the warning light turns off.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer 9 times Warning light (Flashes in yellow) Once Once Once (Flashes in yellow for 15 seconds) (Flashes quickly in green for 15 seconds) (Flashes in yellow for 30 seconds) 521 Warning light/Details/Action Smart entry & start system indicator light An attempt was made to drive when the regular key was not inside the vehicle. → Confirm that the electronic key is inside the vehicle.
8-2. Steps to take in an emergency ■ Front passenger detection sensor, seat belt reminder and warning buzzer ●If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash and the warning buzzer to sound even if a passenger is not sitting in the seat. ●If a cushion is placed on the seat, the sensor may not detect a passenger, and the warning light may not operate properly.
8-2. Steps to take in an emergency 523 ■ Conditions that the tire pressure warning system may not function properly →P. 464 ■ If the tire pressure warning light frequently comes on after blinking for 1 minute If the tire pressure warning light frequently comes on after blinking for 1 minute when the engine switch is turned on, have it checked by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency WARNING ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury.
8-2. Steps to take in an emergency 525 NOTICE ■ To ensure the tire pressure warning system operates properly Do not install tires with different specifications or makers, as the tire pressure warning system may not operate properly. ■ When the DPF system warning light comes on (if equipped) If the DPF system warning light is left on without performing cleaning, after an additional 100 to 300 km (62 to 187 miles), the malfunction indicator lamp may come on.
8-2. Steps to take in an emergency If a warning message is displayed (vehicles with a multi-information display) The multi-information display shows warnings of system malfunctions, incorrectly performed operations, and messages that indicate a need for maintenance. When a message is shown, perform the correction procedure appropriate to the message.
8-2.
8-2. Steps to take in an emergency Other messages displayed on the multi-information display Take the appropriate actions as instructed in the message displayed. If any of the following messages are displayed, also refer to this Owner’s Manual. ■ If “Check charging system.” is displayed Indicates a malfunction in the vehicle's charging system. Immediately stop the vehicle in a safe place and contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency 529 ■ If “Drain water from fuel filter.” is displayed (if equipped) Indicates that the amount of water that has accumulated in the fuel filter has reached a specified level. →P. 458 ■ If “Engine oil low.” is displayed (if equipped) Indicates that the engine oil level may be low. Park the vehicle on a level surface, check the engine oil level and add engine oil if necessary. ■ If “Oil Maintenance required soon.
8-2. Steps to take in an emergency ■ If “DPF full. See owner’s manual.” is displayed (if equipped) Indicates that the amount of accumulated deposits in the DPF catalytic converter has reached a specified level and it is necessary to clean the DPF catalytic converter. (Deposits may accumulate more quickly due to repeated short trips and/or frequent low-speed driving.
8-2. Steps to take in an emergency 531 ■ System warning light In the following situation, the master warning light will not come on or flash. Instead, a separate system warning light will come on along with a message displayed on the multi-information display. Malfunction of the brake system The brake system warning light will come on. (→P. 513) ■ Warning buzzer In some cases, the buzzer may not be heard because of noisy place or an audio sound.
8-2. Steps to take in an emergency If you have a flat tire (vehicles with an emergency tire puncture repair kit) Your vehicle is not equipped with a spare tire, but instead is equipped with an emergency tire puncture repair kit. A puncture caused by a nail or screw passing through the tire tread can be repaired temporarily using the emergency tire puncture repair kit. (The kit contains a bottle of sealant.
8-2. Steps to take in an emergency 533 ■ Before repairing the tire ● Stop the vehicle in a safe place on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (vehicles with a Multidrive) or N (vehicles with a multi-mode manual transmission or manual transmission). ● Stop the engine. ● Turn on the emergency flashers. (→P. 502) ● Check the degree of the tire damage. • Do not remove the nail or screw from the tire.
8-2. Steps to take in an emergency ■ Location of the emergency tire puncture repair kit X Type A 4 Jack*1 1 Luggage floor cover 2 Emergency repair kit 3 Towing eyelet tire puncture 5 Tool bag 6 Wheel cap clip*2 *1: Use of the jack, jack handle and wheel nut wrench. (if equipped) (→P. 562) A jack, jack handle and wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. *2: Use of the wheel cap clip. (if equipped) (→P.
8-2. Steps to take in an emergency X 535 Type B 4 Jack*1 1 Luggage floor cover 2 Emergency repair kit 3 Towing eyelet tire puncture 5 Tool bag 6 Wheel cap clip*2 *1: Use of the jack, jack handle and wheel nut wrench. (if equipped) (→P. 562) A jack, jack handle and wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. *2: Use of the wheel cap clip. (if equipped) (→P.
8-2.
8-2.
8-2. Steps to take in an emergency Taking out the emergency tire puncture repair kit 1 Remove the luggage floor cover. 2 Take out the emergency tire puncture repair kit. (→P. 534) Emergency repair method (type A) 1 Take out the emergency tire puncture repair kit from the tool box. 2 Remove the valve cap from the valve of the punctured tire. 3 Remove the protective film from the bottle and extend the hose. Remove the air release cap from the hose.
8-2. Steps to take in an emergency 539 4 Connect the hose to the valve. Screw the end of the hose clockwise as far as possible. 5 Make sure that the compressor switch is off. 6 Remove the power plug from the compressor. 7 Connect the power plug to the power outlet socket. (→P.
8-2. Steps to take in an emergency 8 Remove the sticker. 9 Attach the 2 stickers as shown. Remove any dirt and moisture from the wheel before attaching the label. If it is impossible to attach the label, make sure to tell any authorized Toyota dealer or repairer, or other duly qualified and equipped professional when you have them repair and replace the tire that sealant is injected.
8-2. Steps to take in an emergency 541 10 Connect the bottle to the com- pressor. As shown in the illustration, insert the bottle vertically into the compressor to connect making sure that the claw on the bottle's neck is hooked onto the cutout of the compressor case. 11 Check the specified tire inflation pressure. Tire inflation pressure is specified on the label as shown. (→P. 473) 12 Start the vehicle’s engine. 13 To inject the sealant and inflate the tire, turn the compressor switch on.
8-2. Steps to take in an emergency 14 Inflate the tire until the specified air pressure is reached. 1 The sealant will be injected and the pressure will surge and then gradually decrease. 2 The air pressure gauge will display the actual tire inflation pressure about 1 minute (5 minutes at low temperature) after the switch is turned on. 3 Inflate the tire until the speci- fied air pressure. • Turn the compressor switch off and then check the tire inflation pressure.
8-2. Steps to take in an emergency 543 15 With the compressor switch off, disconnect the hose from the valve on the tire and then pull out the power plug from the power outlet socket. Some sealant may leak when the hose is removed. 16 Install the valve cap onto the valve of the emergency repaired tire. 17 Attach the air release cap to the end of the hose. If the air release cap is not attached, the sealant may leak and the vehicle may get dirty.
8-2. Steps to take in an emergency 21 Turn the compressor switch on and wait for an approximately 5 seconds, and then turn it off. Check the tire inflation pressure. 1 If the tire inflation pressure is under 130 kPa (1.3 kgf/cm2 or bar, 19 psi): The puncture cannot be repaired. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. 2 2 If the tire inflation pressure is 130 kPa (1.
8-2. Steps to take in an emergency 545 Emergency repair method (type B) 1 Take out the repair kit from the tool box. When taking out the bottle from the original bag, do not tear or discard the bag. 2 Attach the 2 stickers as shown. Remove any dirt and moisture from the wheel before attaching the label.
8-2. Steps to take in an emergency 5 Remove the cap from the bot- tle. 6 Pull the hose out from the com- pressor. 7 Connect the bottle to the com- pressor. Screw the end of the nozzle clockwise as far as possible. 8 Make sure that the compressor switch is off.
8-2. Steps to take in an emergency 547 9 Remove the power plug from the compressor. 10 Connect the power plug to the power outlet socket. (→P. 424) 11 Check the specified tire inflation pressure. Tire inflation pressure is specified on the label as shown. (→P. 473) 12 Start the vehicle’s engine. 13 To inject the sealant and inflate the tire, turn the compressor switch on.
8-2. Steps to take in an emergency 14 Inflate the tire until the specified air pressure is reached. 1 The sealant will be injected and the pressure will surge and then gradually decrease. 2 The air pressure gauge will display the actual tire inflation pressure about 1 minute (5 minutes at low temperature) after the switch is turned on. 3 Inflate the tire until the speci- fied air pressure.
8-2. Steps to take in an emergency 549 18 Disconnect the hose from the bottle and attach the cap to the bottle. Place the bottle in the original bag and zip it. 19 Temporarily store the bottle and compressor in the trunk. 20 To spread the liquid sealant evenly within the tire, immediately drive safely for about 5 km (3 miles) below 80 km/h (50 mph). 21 After driving for about 5 km (3 miles), stop your vehicle in a safe place on a hard, flat surface and connect the compressor.
8-2. Steps to take in an emergency 25 Taking precautions to avoid sudden braking, sudden acceleration and sharp turns, drive carefully at under 80 km/h (50 mph) to the nearest authorized Toyota dealer or repairer, or another duly qualified and equipped professional for tire repair or replacement. ■ If the tire is inflated to more than the specified air pressure X Type A 1 Disconnect the hose from the valve.
8-2. Steps to take in an emergency 551 ■ After a tire is repaired with the emergency tire puncture repair kit ●The tire pressure warning valve and transmitter should be replaced. ●Even if the tire inflation pressure is at the recommended level, the tire pressure warning light may come on/flash. ■ Note for checking the emergency tire puncture repair kit Check the sealant expiry date occasionally. The expiry date is shown on the bottle. Do not use sealant whose expiry date has already passed.
8-2. Steps to take in an emergency WARNING ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. Driving with a flat tire may cause a circumferential groove on the side wall. In such a case, the tire may explode when using a repair kit. ■ Caution while driving ● The repair kit is exclusively only for your vehicle.
8-2. Steps to take in an emergency 553 WARNING ■ When fixing the flat tire ● After inflation of the tire has completed, the sealant may splatter when the hose is disconnected or some air is let out of the tire. ● Follow the operation procedure to repair the tire. If the procedures not followed, the sealant may spray out. ● Keep back from the tire while it is being repaired, as there is a chance of it bursting while the repair operation is being performed.
8-2. Steps to take in an emergency NOTICE ■ When performing an emergency repair ● A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a sharp object such as nail or screw passing through the tire tread. Do not remove the sharp object from the tire. Removing the object may widen the opening and disenable emergency repair with the repair kit. ● The repair kit is not waterproof.
8-2. Steps to take in an emergency 555 If you have a flat tire (vehicles with a spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: →P. 460 WARNING ■ If you have a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair, which could result in an accident.
8-2.
8-2.
8-2.
8-2. Steps to take in an emergency 559 WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● Only use the tire jack that comes with this vehicle for replacing a flat tire.
8-2. Steps to take in an emergency Taking out the jack 1 Remove the luggage cover. 2 Remove the jack cover. 3 Take out the jack.
8-2. Steps to take in an emergency 561 Taking out the spare tire 1 Remove the luggage floor cover. X Vehicles with a compact spare tire 2 Remove the tool tray. X Vehicles with a full-size spare tire 2 Remove the spare wheel cush- ion. (if equipped) 8 secures the spare tire.
8-2. Steps to take in an emergency WARNING ■ When storing the spare tire Be careful not to catch fingers or other body parts between the spare tire and the body of the vehicle. Replacing a flat tire 1 Chock the tires.
8-2. Steps to take in an emergency 563 3 Slightly loosen the wheel nuts (one turn). 4 Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indicate the jack point positions. 5 Raise the vehicle until the tire is slightly raised off the ground. 6 Remove all the wheel nuts and the tire.
8-2. Steps to take in an emergency WARNING ■ Replacing a flat tire ● Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot. Touching these areas with hands, feet or other body parts while changing a tire, etc. may result in burns.
8-2. Steps to take in an emergency 565 Installing the spare tire 1 Remove any dirt or foreign mat- ter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off. 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.
8-2. Steps to take in an emergency 4 Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N•m (10.5 kgf•m, 76 ft•lbf) 5 Vehicles with a full-size spare tire: Reinstall the wheel ornament. Align the cutout of the wheel ornament with the valve stem as shown. 6 Stow the flat tire, tire jack and all tools.
8-2. Steps to take in an emergency 567 ■ The full-size spare tire ●On vehicles with a tire pressure warning system, the full-size spare tire has a “Temporary use only” label on the outer surface of the wheel. Use the full-size spare tire temporarily, and only in an emergency. ●Make sure to check the tire inflation pressure of the full-size spare tire. (→P. 606) ■ The compact spare tire ●The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall.
8-2.
8-2. Steps to take in an emergency 569 WARNING ■ When using the compact spare tire ● Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle. ● Do not use more than one compact spare tires simultaneously. ● Replace the compact spare tire with a standard tire as soon as possible. ● Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations that cause sudden engine braking.
8-2. Steps to take in an emergency NOTICE ■ Be careful when driving over bumps with the compact spare tire installed on the vehicle. The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces. ■ Driving with tire chains and the compact spare tire Do not fit tire chains to the compact spare tire. Tire chains may damage the vehicle body and adversely affect driving performance.
8-2. Steps to take in an emergency 571 If the engine will not start If the engine will not start even though correct starting procedures are being followed (→P. 196, 199), consider each of the following points: The engine will not start even though the starter motor operates normally. One of the following may be the cause of the problem: ● There may not be sufficient fuel in the vehicle’s tank. Refuel the vehicle. ● The engine may be flooded.
8-2. Steps to take in an emergency The starter motor does not turn over, the interior lights and headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem: ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (→P. 578) ● There may be a malfunction in the steering lock system.
8-2. Steps to take in an emergency 573 If the shift lever cannot be shifted from P (vehicles with a Multidrive) If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
8-2. Steps to take in an emergency If the shift lever cannot be shifted (vehicles with a multi-mode manual transmission) If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, immediately.
8-2. Steps to take in an emergency 575 If the electronic key does not operate properly (vehicles with a smart entry & start system) If communication between the electronic key and vehicle is interrupted (→P. 142) or the electronic key cannot be used because the battery is depleted, the smart entry & start system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below.
8-2. Steps to take in an emergency Starting the engine 1 Multidrive: Ensure that the shift lever is in P and depress the brake pedal. Multi-mode manual transmission: Ensure that the shift lever is in N and depress the brake pedal. Manual transmission: Shift the shift lever to N and depress the clutch pedal. 2 Touch the Toyota emblem side of the electronic key to the engine switch. When the electronic key is detected, a buzzer sounds and the engine switch will turn to IGNITION ON mode.
8-2. Steps to take in an emergency 577 ■ Stopping the engine Shift the shift lever to P (Multidrive) or N (manual transmission or multi-mode manual transmission) and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted. (→P.
8-2. Steps to take in an emergency If the vehicle battery is discharged The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below. 1 Open the hood. (→P.
8-2. Steps to take in an emergency 579 3 Connect the jumper cables according to the following procedure: X 1NR-FE engine 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency X 1ZR-FAE engine 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency X 581 1ND-TV engine 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency 7 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. ■ Starting the engine when the battery is discharged The engine cannot be started by push-starting.
8-2. Steps to take in an emergency 583 WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
8-2. Steps to take in an emergency If your vehicle overheats The following may indicate that your vehicle is overheating. ● Vehicles with a drive monitor display: The high engine coolant temperature warning light (→P. 513) comes on or a loss of power is experienced. Vehicles with a multi-information display: The engine coolant temperature gauge (→P. 101) enters the red zone or a loss of power is experienced. ● Steam comes out from under the hood.
8-2. Steps to take in an emergency 585 4 The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir. 1 Reservoir 2 “FULL” line 3 “LOW” line 5 Add engine coolant if neces- sary. Water can be used in an emergency if engine coolant is unavailable. 6 Start the engine and turn the air conditioning system on to check that the radiator cooling fan operate and to check for coolant leaks from the radiator or hoses.
8-2. Steps to take in an emergency WARNING ■ When inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot. ● Keep hands and clothing (especially a tie, a scarf or a muffler) away from the fan and belts. ● Do not loosen the coolant reservoir cap while the engine and radiator are hot.
8-2. Steps to take in an emergency 587 If you run out of fuel and the engine stalls (diesel engine) If you run out of fuel and the engine dies: 1 Refuel your vehicle. 2 Operate the priming pump until you feel more resistance to bleed the fuel system. 3 Start the engine. (→P. 196, 199) If the engine does not start after the above steps have been performed, wait for 10 seconds and try step 2 and 3 again.
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: 1 Stop the engine. Set the parking brake and shift the shift lever to P (Multidrive) or N (manual transmission and multi-mode manual transmission). 2 Remove the mud, snow or sand from around the front wheels. 3 Place wood, stones or some other material under the front wheels to help provide traction. 4 Restart the engine.
8-2. Steps to take in an emergency 589 ■ When it is difficult to free the vehicle Press to turn off TRC. *1: Vehicles with a drive monitor display *2: Vehicles with a multi-information dis- *1 *2 play WARNING ■ When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free. Use extreme caution.
8-2.
Vehicle specifications 9 9-1. Specifications Maintenance data (fuel, oil level, etc.)...........592 Fuel information .................609 9-2. Customization Customizable features .......611 9-3. Initialization Items to initialize ................
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 4620 mm (181.9 in.) Overall width 1775 mm (69.9 in.) Overall height*1 1465 mm (57.7 in.) 1485 mm (58.5 in.)*2 Wheelbase 2700 mm (106.3 in.) Front 1535 mm (60.4 in.)*3 1525 mm (60.0 in.)*4 1515 mm (59.6 in.)*5 Rear 1535 mm (60.4 in.)*3 1520 mm (59.8 in.)*4 1510 mm (59.4 in.)*5 Tread X 1NR-FE engine 1735 kg (3826 lb.) X 1ZR-FAE engine Gross vehicle mass 1775 kg (3913 lb.
9-1. Specifications 593 Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the right-hand front seat. This number is also on the manufacturer’s label.
9-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown.
9-1. Specifications 595 Engine X Gasoline engine Model 1NR-FE, 1ZR-FAE Type 4-cylinder in line, 4-cycle, gasoline X 1NR-FE engine Bore and stroke 72.5 × 80.5 mm (2.85 × 3.17 in.) X 1ZR-FAE engine 80.5 × 78.5 mm (3.17 × 3.09 in.) Displacement Valve clearance X 1NR-FE engine 1329 cm3 (81.1 cu.in.) X 1ZR-FAE engine 1598 cm3 (97.5 cu.in.) Automatic adjustment X 1NR-FE engine Automatic adjustment X 1ZR-FAE engine 7.6 10.0 mm (0.30 0.39 in.
9-1. Specifications X Diesel engine Model 1ND-TV Type 4-cylinder in line, 4-cycle, diesel (with turbocharger) Bore and stroke 73 × 81.5 mm (2.87 × 3.21 in.) Displacement 1364 cm3 (83.2 cu.in.) Valve clearance (engine Intake: 0.11 0.17 mm (0.004 0.007 in.) cold) Exhaust: 0.14 0.20 mm (0.006 0.008 in.) Drive belt tension Automatic adjustment NOTICE ■ Drive belt type (1ND-TV engine) The high strength drive belt is used for the generator side drive belt.
9-1. Specifications 597 Fuel X Gasoline engine Fuel type EU area: Unleaded gasoline conforming to European standard EN228 only Except EU area: Unleaded gasoline only Research Octane Number 95 or higher Fuel tank capacity (Reference) 55 L (14.5 gal., 12.1 Imp. gal.) X Diesel engine Fuel type EU area: Diesel fuel conforming to European standard EN590 Except EU area: Diesel fuel that contains 50 ppm or less of sulfur Cetane number 48 or higher Fuel tank capacity (Reference) 55 L (14.5 gal.
9-1. Specifications Lubrication system Oil capacity (Drain and refill reference*) With filter X 1NR-FE engine 3.4 L (3.6 qt., 3.0 Imp. qt.) X 1ZR-FAE engine 4.2 L (4.4 qt., 3.7 Imp. qt.) X 1ND-TV engine (for Turkey) 3.9 L (4.1 qt., 3.4 Imp. qt.) X 1ND-TV engine (except for Turkey) 3.7 L (3.9 qt., 3.3 Imp. qt.) Without filter X 1NR-FE engine 3.2 L (3.4 qt., 2.8 Imp. qt.) X 1ZR-FAE engine 3.9 L (4.1 qt., 3.4 Imp. qt.) X 1ND-TV engine (for Turkey) 3.5 L (3.7 qt., 3.1 Imp. qt.
9-1. Specifications 599 Recommended viscosity (SAE): SAE 0W-20 is filled into your Toyota vehicle at manufacturing, and the best choice for good fuel economy and good starting in cold weather. If SAE 0W-20 oil is not available, SAE 5W-30 oil may be used. However, it should be replaced with SAE 0W-20 at the next oil change. If you use SAE 10W-30 or a higher viscosity engine oil in extremely low temperatures, the engine may become difficult to start, so SAE 0W-20 or 5W30 engine oil is recommended.
9-1. Specifications How to read oil container labels: Either or both API registered marks are added to some oil containers to help you select the oil you should use. 1 API Service Symbol Top portion: “API SERVICE SN” means the oil quality designation by American Petroleum Institute (API). Center portion: “SAE 0W-20” means the SAE viscosity grade. Lower portion: “ResourceConserving” means that the oil has fuel-saving and environmental protection capabilities.
9-1. Specifications X 601 Diesel engine “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used Oil grade: ACEA C2 NOTICE Using engine oil other than ACEA C2 may damage the catalytic converter. Recommended viscosity (SAE): SAE 0W-30 is filled into your Toyota vehicle at manufacturing, and the best choice for good fuel economy and good starting in cold weather.
9-1. Specifications Cooling system 1NR-FE engine 4.7 L (5.0 qt., 4.1 Imp. qt.) X Vehicles with a Multidrive 1ZR-FAE engine Capacity 5.8 L (6.1 qt., 5.1 Imp. qt.) X Vehicles with a manual transmission 5.6 L (5.9 qt., 4.9 Imp. qt.) X Without power heater 1ND-TV engine 5.6 L (5.9 qt., 4.9 Imp. qt.) X With power heater 6.0 L (6.3 qt., 5.3 Imp. qt.) Coolant type Use either of the following.
9-1. Specifications 603 Electrical system Battery Open voltage at 20°C 12.3 V or more (68°F): If the voltage is lower than the standard value, charge the battery. (Voltage is checked 20 minutes after the engine and all lights are turned off.) Charging rates 5 A max. Multidrive Fluid capacity* 7.5 L (7.9 qt., 6.6 Imp. qt.) Fluid type Toyota Genuine CVTF FE *: The fluid capacity is a reference quantity.
9-1. Specifications Manual transaxle Gear oil capacity (Reference) 2.4 L (2.5 qt., 2.1 Imp. qt.) Gear oil type “TOYOTA Genuine Manual Transmission Gear Oil LV GL-4 75W” or equivalent NOTICE ■ Manual transaxle gear oil ● Be aware that depending on the particular characteristics of the gear oil used or the operating conditions, the idle sound, shift feeling and/or fuel efficiency may be different or affected, and damage to the transaxle may occur.
9-1. Specifications 605 Clutch Pedal free play 5 15 mm (0.2 0.6 in.) Fluid type SAE J1703 or FMVSS No.116 DOT 3 or SAE J1704 or FMVSS No.116 DOT 4 Brakes Pedal clearance*1 Left-hand drive vehicles 69 mm (2.71 in.) Min. Right-hand drive vehi- 78 mm (3.07 in.) Min. cles 1 6 mm (0.04 0.24 in.) Pedal free play Parking travel*2 Fluid type brake lever 6 8 clicks SAE J1704 or FMVSS No.116 DOT 4 *1: Minimum pedal clearance when depressed with a force of 300 N (30.6 kgf, 67.
9-1. Specifications Steering Free play Less than 30 mm (1.2 in.) Tires and wheels X 15-inch tires Tire size 195/65R15 91H Vehicle speed Front wheel Rear wheel kPa (kgf/cm2 kPa (kgf/cm2 or bar, psi) or bar, psi) Type A*: 260 (2.6, 38) Type B*: 270 (2.7, 39) Type A*: 260 (2.6, 38) Type B*: 270 (2.7, 39) Type A*: 160 km/h (100 230 (2.3, 33) mph) or less Type B*: 240 (2.4, 35) Type A*: 230 (2.3, 33) Type B*: 240 (2.
9-1. Specifications X 16-inch and 17-inch tires Tire size 205/55R16 91V, 215/45R17 87W Vehicle speed Front wheel Rear wheel kPa (kgf/cm2 kPa (kgf/cm2 or bar, psi) or bar, psi) Tire inflation pressure More than 160 (Recommended 260 (2.6, 38) cold tire inflation km/h (100 mph) pressure) 160 km/h (100 230 (2.3, 33) mph) or less Wheel size 16 × 6 1/2 J (16-inch tires), 17 × 7 J (17-inch tires) Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf) X 607 260 (2.6, 38) 230 (2.
9-1. Specifications Light bulbs Light Bulbs Exterior W Type Headlights (bulb type) Low beam High beam 55 60 A B Front fog lights* 19 C Front turn signal lights 21 D Side turn signal lights 5 D Rear fog light (bulb type) 21 E Rear turn signal lights 21 D 21/5 E Tail lights (bulb type) 5 E Back-up lights 16 E Licence plate lights 5 E Vanity lights* 5 F Front interior light/personal lights 8 E Rear interior light 8 F 3.
9-1. Specifications 609 Fuel information X Gasoline engine EU area: You must only use unleaded gasoline conforming to European standard EN228. Select unleaded gasoline with a Research Octane Number of 95 or higher for optimum engine performance. Except EU area: You must only use unleaded gasoline. Select unleaded gasoline with a Research Octane Number of 95 or higher for optimum engine performance. X Diesel engine EU area: You must only use diesel fuel conforming to European standard EN590.
9-1. Specifications NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Gasoline engine: Do not use leaded gasoline. Leaded gasoline will cause the three-way catalytic converter to lose its effectiveness and the emission control system to function improperly. ● Diesel engine: Do not use a fuel that contains more than 50 ppm of sulfur. Use of such a high sulfur fuel may damage the engine.
9-2. Customization 611 Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed using the meter control switches, on the navigation/multimedia system screen or at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
9-2. Customization ■ Gauges, meters and multi-information display*1 (→P.
9-2. Customization *1: Vehicles with a multi-information display *2: For details about each function: →P. 107 *3: The default setting varies according to country.
9-2. Customization ■ Smart entry & start system* (→P. 127, 133, 138) Function Default setting Customized setting Smart entry & start system On Off O — O Number of consecutive door lock operations 2 times As many as desired — — O 1 2 3 *: If equipped ■ Wireless remote control (→P.
9-2. Customization ■ Automatic light control system* (→P. 224) Function Default setting Customized setting Adjust the sensitivity of the ambient light sensor Level 3 Levels 1 to 5 1 2 3 O — O *: If equipped ■ Follow me home system (→P. 226) Function Default setting Time elapsed before headlights automatically turn off Customized setting 1 2 3 60 seconds 30 seconds 90 seconds — — O 120 seconds ■ LDA (Lane Departure Alert)* (→P.
9-2. Customization ■ Stop & Start system* (→P. 274) Function Default setting Customized setting Change the Stop & Start system duration when the A/C is on Normal Long 1 2 3 — O — *: If equipped ■ Toyota parking assist-sensor* (→P. 293) Function Toyota parking sensor system assist- Default setting Customized setting On Off 1 2 3 — O — *: If equipped ■ Automatic air conditioning system* (→P.
9-2. Customization ■ Illumination (→P. 413) Function Default setting Customized setting Interior light illumination control* On Off Time elapsed before the interior lights turn off 15 seconds Operation after the engine switch is turned off On Off — — O Operation when doors are unlocked On Off — — O On Off — — O the Operation when you approach the vehicle with the electronic key on your person* 7.
9-3. Initialization Items to initialize The following item must be initialized for normal system operation after such cases as the 12-volt battery being reconnected, or maintenance being performed on the vehicle: Item Engine data* oil maintenance When to initialize After changing the engine oil • When changing the tire size • When changing the tire inflaTire pressure warning systion pressure by changing tem* traveling speed or load weight, etc. *: If equipped Reference P. 450 P.
Index What to do if... (Troubleshooting) .....................620 Alphabetical index ......................
What to do if... (Troubleshooting) What to do if... (Troubleshooting) If you have a problem, check the following before contacting any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The doors cannot be locked, unlocked, opened or closed You lose your keys ● If you lose your keys or mechanical keys, new genuine keys or mechanical keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. (→P.
What to do if... (Troubleshooting) 621 The rear door cannot be opened ● Is the child-protector lock set? The rear door cannot be opened from inside the vehicle when the lock is set. Open the rear door from outside and then unlock the child-protector lock. (→P. 131) The trunk lid is closed with the electronic key left inside (vehicles with a smart entry & start system) ● The function to prevent the electronic key from being left inside the trunk will operate and you can open the trunk as usual.
What to do if... (Troubleshooting) The engine does not start (vehicles with a smart entry & start system) ● Except vehicles with a manual transmission: Did you press the engine switch while firmly depressing the brake pedal? (→P. 199) ● Vehicles with a manual transmission: Did you press the engine switch while firmly depressing the clutch pedal? (→P. 199) ● Vehicles with a Multidrive: Is the shift lever in P? (→P. 205) ● Is the electronic key anywhere detectable inside the vehicle? (→P.
What to do if... (Troubleshooting) 623 The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart entry & start system: It is locked to prevent theft of the vehicle if the key is pulled from the engine switch. (→P. 197) ● Vehicles with a smart entry & start system: It is locked automatically to prevent theft of the vehicle. (→P.
What to do if... (Troubleshooting) A warning buzzer sounds during driving ● The seat belt reminder light is flashing Are the driver and the front passenger wearing the seat belts? (→P. 517) ● The brake system warning light is on Is the parking brake released? (→P. 223) Depending on the situation, other types of warning buzzer may also sound. (→P.
What to do if... (Troubleshooting) 625 When a problem has occurred If you have a flat tire ● Vehicles with an emergency tire puncture repair kit: Stop the vehicle in a safe place and repair the flat tire temporarily with the emergency tire puncture repair kit. (→P. 532) ● Vehicles with a spare tire: Stop the vehicle in a safe place and replace the flat tire with the spare tire. (→P. 555) The vehicle becomes stuck ● Try the procedure for when the vehicle becomes stuck in mud, dirt, or snow. (→P.
Alphabetical index Alphabetical index A A/C..................................... 392, 399 Air conditioning filter.............. 478 ABS (Anti-lock Brake System)...... 314 Function ................................ 314 Warning light ......................... 515 Air conditioning filter .............. 478 Air conditioning system ............................ 392, 399 Air conditioning filter.............. 478 Airbag manual on-off system ......................................55 Airbags .....................
Alphabetical index B Back-up lights Replacing light bulb............... 496 Wattage................................. 608 Battery ...................................... 454 Checking ............................... 454 If the vehicle has discharged battery................................. 578 Preparing and checking before winter....................... 323 Warning light ......................... 513 Bluetooth® Audio system ........................ 379 Hands-free system (for cellular phone)..............
Alphabetical index Child safety ................................57 Airbag precautions ..................45 Battery precautions ....... 456, 583 Child restraint system .............58 How your child should wear the seat belt ..........................40 Installing child restraints..........67 Power window lock switch .... 169 Power window precautions ... 172 Rear door child-protectors .... 131 Removed electronic key battery precautions ............. 482 Seat belt precautions ..............
Alphabetical index E Eco Driving Indicator ........................... 99, 109 Electric Power Steering (EPS)....................................... 314 Function ................................ 314 Warning light ......................... 515 Electronic key .......................... 116 Battery-saving function ......... 141 If the electronic key does not operate properly ................. 575 Replacing the battery ............ 480 Emergency, in case of If a warning message or indicator is displayed .......
Alphabetical index F Flat tire Vehicles with a spare tire ...... 555 Vehicles with an emergency tire puncture repair kit......... 532 Floor mats ..................................34 Fluid Brake..................................... 605 Multidrive............................... 603 Washer.................................. 457 Fog lights.................................. 230 Replacing light bulbs............. 488 Switch ................................... 230 Wattage.................................
Alphabetical index H Hands-free system (for cellular phone)................ 382 Head restraints......................... 159 Headlights ................................ 224 Follow me home system ....... 226 Light switch ........................... 224 Replacing light bulbs..... 490, 491 Wattage................................. 608 Heaters Outside rear view mirrors ........................ 394, 403 Seat heaters.......................... 411 Hill-start assist control ................. 314, 321 Hood..........
Alphabetical index L Lever Auxiliary catch lever .............. 441 Hood lock release lever ........ 441 Shift lever .............. 209, 213, 218 Turn signal lever ................... 222 Wiper lever............................ 232 License plate lights ................. 224 Light switch ........................... 224 Replacing light bulbs............. 497 Wattage................................. 608 Light bulbs Replacing .............................. 488 Wattage.................................
Alphabetical index MP3 disc ................................... 338 Multi-information display ........ 101 Drive information................... 105 Language .............................. 108 LDA (Lane Departure Alert) ................................... 261 PCS (Pre-Crash Safety system) ....................... 246, 249 RSA (Road Sign Assist)................................. 269 Settings ................................. 107 Stop & Start system .............. 281 Warning message .................
Alphabetical index R Radiator .................................... 453 Radio......................................... 334 Radio Data System (RDS) ....... 336 Rear fog light............................ 230 Replacing light bulb............... 496 Switch ................................... 230 Wattage................................. 608 Rear interior light..................... 414 Rear seat Folding down......................... 156 Rear turn signal lights............. 222 Replacing light bulbs..........
Alphabetical index Sensor Automatic headlight system ................................ 227 Inside rear view mirror .......... 164 Rain-sensing windshield wipers ................................. 235 Toyota parking assist-sensor ...................... 293 Shift lever ................. 209, 213, 218 If the shift lever cannot be shifted ............................ 574 If the shift lever cannot be shifted from P ................ 573 Manual transmission ............. 218 Multidrive..............................
Alphabetical index Switches Airbag manual on-off switch.................................... 55 Audio remote control switches.............................. 330 Cruise control switch............. 286 “DISP” switch ..........................96 Door lock switches ................ 130 Emergency flashers switch ... 502 Engine switch................ 196, 199 “Es” switch ............................ 214 Fog light switch ..................... 230 Ignition switch ............... 196, 199 Light switches ........
Alphabetical index T Tachometer ........................ 92, 101 Tail lights .................................. 224 Light switch ........................... 224 Replacing light bulbs............. 495 Wattage................................. 608 Telephone switches* ............... 367 Theft deterrent system Engine immobilizer system .....77 Tire inflation pressure ............. 473 Maintenance data ................. 606 Tire pressure warning system .................................... 461 Function .........
Alphabetical index Traction Control (TRC) ............ 314 Trailer towing .......................... 188 Transmission ........... 209, 213, 218 TRC (Traction Control) ............ 314 Trip information ................. 96, 103 Trip meters ......................... 96, 103 Trunk......................................... 133 Smart entry & start system ................................ 133 Trunk features....................... 422 Trunk handle ......................... 135 Trunk light .....................
Alphabetical index W Warning buzzers ...................... 513 Brake system ........................ 513 Clutch.................................... 514 Downshifting ................. 212, 216 Key reminder......................... 197 Open door ............................. 517 Open trunk ............................ 517 Seat belt reminder................. 517 Toyota parking assist-sensor ...................... 293 Warning lights............................87 ABS.......................................
GAS STATION INFORMATION Auxiliary catch lever Trunk opener Fuel filler door P. 441 P. 133 P. 239 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 441 P. 239 P. 606 Fuel tank capacity (Reference) Fuel type 55 L (14.5 gal., 12.1 Imp. gal.) P. 597, 609 Cold tire inflation pressure P. 606 Engine oil capacity (Drain and refill — reference) P. 598 Engine oil type “Toyota Genuine Motor Oil” or equivalent P.
