TABLE OF CONTENTS 1 Before driving Adjusting and operating features such as door locks, mirrors, and steering column. 2 When driving Driving, stopping and safe-driving information. 3 Interior features Air conditioning and audio systems, as well as other interior features for a comfortable driving experience. 4 Maintenance and care Cleaning and protecting your vehicle, performing do-ityourself maintenance, and maintenance information.
TABLE OF CONTENTS 1 Index 1-6. Theft deterrent system Before driving Engine immobilizer system ................................ 68 Theft prevention labels ........ 70 1-1. Key information Keys ..................................... 26 1-7. Safety information Correct driving posture ......... SRS airbags ......................... Front passenger occupant classification system........... Child restraint systems ......... Installing child restraints ....... 1-2.
2-3. Operating the lights and wipers Headlight switch.................. Fog light switch ................... Windshield wipers and washer .............................. Rear window wiper and washer .............................. 3 138 141 143 146 2-4. Using other driving systems Cruise control...................... 148 Driving assist systems ........ 152 2-5. Driving information Cargo and luggage ............. Vehicle load limits ............... Winter driving tips ............... Trailer towing (1.
TABLE OF CONTENTS Index 3-4. Using the hands-free phone system (for cellular phone) 4 Making a phone call ........... 262 Using the “SET UP” menu (“Bluetooth” menu) ........... 267 Using the “SET UP” menu (“Phone” menu) ................ 273 3-5. Using the interior lights Interior lights list ................. • Interior light ...................... • Personal/interior lights...... • Personal lights ................. 279 280 281 282 3-6. Using the storage features List of storage features.......
5 When trouble arises 6 6-1. Specifications 5-1. Essential information Emergency flashers ............ If your vehicle needs to be towed ................................ If you think something is wrong ................................ Fuel pump shut off system .............................. Maintenance data (fuel, oil level, etc.) ........... 438 Fuel information.................. 454 Tire information .................. 457 388 389 395 2 396 Customizable features........ 469 6-3.
Pictorial index Exterior Headlights (low beam) P. 138 Headlights (high beam) and daytime running lights P. 138, 140 Hood P. 330 Moon roof ∗ P. 61 Outside rear view mirrors P. 57 Front turn signal/parking and front side marker lights P. 129, 138 Windshield wipers P. 143 Front fog lights ∗ P.
Rear window defogger P. 193 Fuel filler door Doors P. 64 P. 31 Rear window wiper ∗ P. 146 Back door P. 36 License plate lights P. 138 Tires ●Rotation ●Replacement ●Inflation pressure ●Information P. 349 P. 408 P. 451 P. 457 Stop/tail and rear side marker lights P. 138 Rear turn signal lights P.
Pictorial index Seat belts P. 48 Head restraints P. 46 Interior SRS driver airbag P. 73 Bottle holders P. 287 Power window switches ∗ P. 59 SRS front passenger airbag P. 73 Bottle holders P. 287 Glove box P. 284 Cup holders P. 285 Floor mats P. 301 Grocery bag hook Console box P. 284 SRS side airbags 8 MATRIX_U P. 297 P. 73 Front seats P.
A Vehicles with moon roof Vanity mirrors P. 291 Sun visors P. 290 Auxiliary box P. 288 Microphone ∗, *1 P. 255 Moon roof switches SRS curtain shield airbags P. 61 P. 73 Interior lights P. 280 Assist grips P. 300 Personal/interior lights P. 281 Anti-glare inside rear view mirror P. 55 Compass ∗ P. 309 ∗: If equipped *1: For vehicles with a Display Audio system, refer to “Display Audio System Owner’s Manual”.
Pictorial index Interior A Vehicles without moon roof Vanity mirrors P. 291 Sun visors P. 290 Personal lights P. 282 Microphone ∗, *1 P. 255 SRS curtain shield airbags P. 73 Interior lights P. 280 Assist grips P. 300 Anti-glare inside rear view mirror 10 MATRIX_U P.
B Door lock switch ∗ Inside door lock button P. 32 P. 31 Window lock switch ∗ P. 59 Power window switches ∗ P. 59 ∗: If equipped *1: For vehicles with a Display Audio system, refer to “Display Audio System Owner’s Manual”.
Pictorial index Interior C Power outlet ∗ P. 295 Cup holders P. 285 Power outlet ∗ P. 295 Cigarette lighter ∗ P. 294 Parking brake lever P. 130 AUX port ∗ P. 246 AUX port/USB port ∗ P.
Pictorial index Instrument panel Gauges and meters P. 132 Headlight switch P. 138 Turn signal lever P. 129 Fog light switch ∗ P. 141 Outside rear view mirror switches P. 57 Fuel filler door opener P. 64 Emergency flasher switch P. 388 Horn P. 131 Security indicator P. 68 Audio system P. 194 Windshield wiper and washer switch P. 143 Rear window wiper and washer switch ∗ P. 146 Tire pressure warning reset switch ∗ P. 349 Tilt and telescopic steering control lever P.
Pictorial index Instrument panel A Air conditioning system P. 186 Rear window and outside rear view mirror defogger switch ∗/rear window defogger switch ∗ P.
B Engine (ignition) switch P. 118 Audio remote control switches P. 248 Cruise control switch ∗ P.
Pictorial index Instrument panel C Clock P. 292 Shift lock override button ∗ P. 423 16 MATRIX_U Shift lever P.
D VSC off switch P. 152 Auxiliary box P. 288 Hood lock release lever P.
For your information Main Owner’s Manual Please note that this manual covers all models and all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice.
Installation of a mobile two-way radio system As the installation of a mobile two-way radio system in your vehicle may affect electronic systems such as the multi-port fuel injection system/sequential multi-port fuel injection system, cruise control system, anti-lock brake system, SRS airbag system or seat belt pretensioner system, be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation.
Event data recorder This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained • In response to an official request by the police, a court of law or a government agency • For use by Toyota in a law suit However, if necessary, Toyota may: • Use the data for research on vehicle safety performance • Disclose the data to a third party for research purposes without disclosing information abou
CAUTION ■ General precautions while driving Driving under the influence: Never drive your vehicle when under the influence of alcohol or drugs that have impaired your ability to operate your vehicle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury. Defensive driving: Always drive defensively. Anticipate mistakes that other drivers or pedestrians might make and be ready to avoid accidents.
Symbols used throughout this manual Cautions & Notices CAUTION This is a warning against anything which may cause death or injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others. NOTICE This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored.
24 MATRIX_U
Before driving 1-5. Refueling 1-1. Key information Keys ................................... 26 1-2. Opening, closing and locking the doors Opening the fuel tank cap ................................... 64 1-6. Theft deterrent system Wireless remote control ..... 28 Doors ................................. 31 Back door........................... 36 Engine immobilizer system ............................. 68 Theft prevention labels....... 70 1-7. Safety information 1-3.
1-1. Key information Keys The following keys are provided with the vehicle. Vehicles without wireless remote control Keys Key number plate Vehicles with wireless remote control Keys Operating the wireless remote control function (→P. 28) Key number plate ■ Key number plate Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P.
1-1. Key information NOTICE ■ To prevent key damage ● Do not subject the keys to strong shocks, expose them to high temperatures by placing them in direct sunlight, or get them wet. ● Do not disassemble the key. 27 MATRIX_U Before driving ● Do not expose the keys to electromagnetic materials or attach any material that blocks electromagnetic waves to the key surface.
1-2. Opening, closing and locking the doors Wireless remote control∗ The wireless remote control can be used to lock and unlock the vehicle from outside the vehicle. Locks all doors Sounds an alarm (press and hold) Unlocks doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. ■ Operation signals A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked.
1-2. Opening, closing and locking the doors ■ Key battery depletion If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 367) ■ Security feature If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again. The wireless remote control function may not operate normally in the following situations.
1-2. Opening, closing and locking the doors ■ Certification for wireless remote control For vehicles sold in the U.S.A. NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1-2. Opening, closing and locking the doors Doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. ■ Wireless remote control (if equipped) 1 →P. 28 Before driving ■ Key Locks the door Unlocks the door Vehicles with power door lock system: Turning the key locks and unlocks all doors. In the driver’s door lock, turning the key once unlocks the driver’s door. Turning the key again within 3 seconds unlocks the other doors.
1-2. Opening, closing and locking the doors ■ Inside lock button Unlocks the door Locks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position. Rear door child-protector lock The door cannot be opened from inside the vehicle when the locks are set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
1-2. Opening, closing and locking the doors Automatic door locking and unlocking systems (vehicles with power door lock system) The following functions can be set or cancelled: 1 Function Operation Shifting the shift lever out of P locks all doors. Shift position linked door unlocking function* Shifting the shift lever to P unlocks all doors.
1-2. Opening, closing and locking the doors ■ Setting and canceling the functions To switch between set and canceled, follow the procedure below: STEP 1 Close all the doors and switch the engine switch to the “ON” position. (Perform step 2 within 10 seconds.) STEP 2 Shift the shift lever to P or N, and press and hold the driver's door lock switch ( or ) for approximately 5 seconds and then release. The shift lever and switch positions corresponding to the desired function to be set are shown as follows.
1-2. Opening, closing and locking the doors ■ When all the doors are locked with the wireless remote control or key The doors cannot be unlocked with the door lock switch. The door lock switch can be reset by unlocking all the doors with the wireless remote control or key. 1 ■ The doors cannot be locked when Before driving The key is in the engine switch and either of the front door is open. ■ Customization that can be configured at Toyota dealer Settings (e.g.
1-2. Opening, closing and locking the doors Back door The back door can be locked and unlocked using the wireless remote control or key. Wireless remote control (if equipped) →P. 28 Key Locks the back door Unlocks the back door Opens the back door ■ Back door handle Use the back door handle when closing.
1-2. Opening, closing and locking the doors CAUTION ■ Caution while driving ● Before driving the vehicle, make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving, causing an accident. ● Never let anyone sit in the luggage compartment. In the event of sudden braking or a collision, they are susceptible to death or serious injury. ■ When children are in the vehicle Observe the following precautions.
1-2. Opening, closing and locking the doors CAUTION ● When opening or closing the back door, thoroughly check to make sure the surrounding area is safe. ● If anyone is in the vicinity, make sure they are safe and let them know that the back door is about to open or close. ● Use caution when opening or closing the back door in windy weather as it may move abruptly in strong wind. ● The back door may suddenly shut if it is not opened fully.
1-2. Opening, closing and locking the doors NOTICE ■ Back door damper stays The back door is equipped with damper stays that hold the back door in place. ●Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod. ●Do not touch the damper stay rod with gloves or other fabric items. ●Do not attach any accessories other than genuine Toyota parts to the back door. ●Do not place your hand on the damper stay or apply lateral forces to it.
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Seat position lever adjustment Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only) Folding down the front passenger's seat (vehicles with seatback table) STEP 1 40 MATRIX_U Move the seat rearward.
1-3. Adjustable components (seats, mirrors, steering wheel) STEP 2 Lower the head restraint and fix the seatback at the most upright lock position. 1 Pull up either seatback lock release knob beside the seatback and fold the seatback down. Active head restraints When the occupant’s back presses against the seatback during a rear-end collision, the head restraint moves slightly forward to help reduce the risk of whiplash on the seat occupant.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate problems. Inner structure During rear-end collision CAUTION ■ Seat adjustment ● Be careful that the seat does not hit passengers or luggage.
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position (vehicles with seatback table) ■ Caution while driving (vehicles with seatback table) Do not sit on or place anything on the folded seatback. 43 MATRIX_U 1 Before driving Make sure the seatback is securely locked by pressing forward and rearward on the top of the seatback. Failure to do so will prevent seat belt from operating properly.
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats The seatbacks of the rear seats can be folded down. STEP 1 Stow the rear outside seat belt buckles and move the rear center seat belt buckle as shown. STEP 2 Lower the head restraints to the lowest position. STEP 3 Fold the seatback down while pulling the seatback lock release knob.
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ After returning the seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. ● Check that the seat belts are not twisted or caught in the seatback. ■ Caution while driving Do not sit on the folded seatback. 45 MATRIX_U Before driving ● Make sure that the seatback is securely locked in position by lightly rocking it back and forth.
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Up Pull the head restraints up. Lock release button Down Push the head restraint down while pushing the lock release button. ■ Removing the head restraints Pull the head restraint up while pushing the lock release button. ■ Installing the head restraints Align the head restraint with the installation holes and push it down while pressing the lock release button.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Always raise the head restraint one level from the stowed position when using. CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. ■ Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Adjusting the height of the belt (front seats) Push the seat belt shoulder anchor down while pressing the release button. 1 Before driving Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occupant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Pregnant women Obtain medical advice and wear the seat belt in the proper way. (→P. 48) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occupants. Extend the shoulder belt completely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area.
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failing to do so may cause death or severe injury. 1 ■ Wearing a seat belt ● Always wear a seat belt properly. ● Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children.
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Seat belt pretensioners ● Do not place anything, such as a cushion, on the front passenger's seat. Doing so will disperse the passenger's weight, which prevents the sensor from detecting the passenger's weight properly. As a result, the seat belt pretensioner for the front passenger's seat may not activate in the event of a collision. ● If the pretensioner has activated, the SRS warning light will come on.
1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender. ● The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended. NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt.
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel The steering wheel can be adjusted to a comfortable position. STEP 1 Hold the steering wheel and press the lever down. STEP 2 Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the steering wheel. CAUTION ■ Caution while driving Do not adjust the steering wheel while driving.
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror 1 Normal position Before driving Anti-glare position Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.
1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the rear view mirror Adjust the height of the rear view mirror by moving it up and down. ■ To prevent sensor error To ensure that the sensors operate properly, do not touch or cover them. CAUTION ■ Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch. STEP 1 Select a mirror to adjust. Left 1 Right Before driving STEP 2 Adjust the mirror. Up Right Down Left Folding back the mirrors Push backward to fold the mirrors.
1-3. Adjustable components (seats, mirrors, steering wheel) ■ Mirror angle can be adjusted when The engine switch is in the “ACC” or “ON” position. ■ When the mirrors are fogged up (vehicles with outside rear view mirror defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 193) CAUTION ■ When driving the vehicle Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.
1-4. Opening and closing the windows and moon roof Power windows∗ The power windows can be opened and closed using the following switches. Closing 1 Opening Before driving One-touch opening (driver’s window only)* *: To stop the window partway, operate the switch in the opposite direction. Lock switch Press the switch down to lock the passenger window switches. Use this switch to prevent children from accidentally opening or closing a passenger window.
1-4. Opening and closing the windows and moon roof CAUTION ■ Closing the windows Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their body in a position where it could be caught when a window is being operated. ● Do not allow children to operate the power windows. Closing a power window on someone can cause serious injury, and in some instances, even death.
1-4. Opening and closing the windows and moon roof Moon roof∗ Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing 1 Opens the moon roof* Before driving The moon roof stops slightly before the fully open position to reduce wind noise. Press the switch again to fully open the moon roof. Closes the moon roof* *: Lightly press either of the moon roof switches to stop the moon roof partway.
1-4. Opening and closing the windows and moon roof ■ The moon roof can be operated when The engine switch is in the “ON” position. ■ Operating the moon roof after turning the engine OFF The moon roof can be operated for approximately 45 seconds after the engine switch is turned to the “ACC” or “LOCK” position. It cannot, however, be operated once either front door is opened.
1-4. Opening and closing the windows and moon roof CAUTION ■ Opening the moon roof Observe the following precautions. Failing to do so may cause death or serious injury. 1 ● Do not sit on top of the moon roof. ■ Closing the moon roof Observe the following precautions. Failing to do so may result in death or serious injury. ● Check to make sure that all passengers do not have any part of their bodies in a position where it could be caught when the moon roof is being operated.
1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. ■ Before refueling the vehicle Turn the engine switch OFF and ensure that all the doors and windows are closed. ■ Opening the fuel tank cap STEP 1 Pull up the fuel filler door opener. STEP 2 Turn the fuel tank cap slowly to open. STEP 3 Hang the fuel tank cap on the back of the fuel filler door.
1-5. Refueling Closing the fuel tank cap When replacing the fuel tank cap, turn it until a clicking sound is heard. ■ Fuel type Unleaded gasoline (Octane rating 87 [Research Octane Number 91] or higher) ■ Fuel tank capacity 13.2 gal. (50 L, 10.9 Imp. gal.) 65 MATRIX_U Before driving After releasing your hand, the cap will turn slightly to the opposite direction.
1-5. Refueling CAUTION ■ Refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● Touch the vehicle or some other metal surface to discharge any static electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite. ● Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened.
1-5. Refueling NOTICE ■ Refueling 67 MATRIX_U 1 Before driving Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle's painted surface.
1-6. Theft deterrent system Engine immobilizer system The vehicle's keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle's on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the key has been removed from the engine switch to indicate that the system is operating.
1-6. Theft deterrent system ■ Certifications for the engine immobilizer system (for vehicles sold in Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
1-6. Theft deterrent system Theft prevention labels (except for Canada) These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. Do not remove under penalty of law.
1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 40) 1 Before driving Adjust the position of the seat forward or backward to ensure the pedals can be reached and easily depressed to the extent required. (→P. 40) Adjust the seatback so that the controls are easily operable. Adjust the tilt and telescopic positions of the steering wheel downward so the airbag is facing your chest. (→P.
1-7. Safety information CAUTION ■ While driving ● Do not adjust the position of the driver's seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger. ● Do not place anything under the front seats.
1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. 1 Before driving Front airbags Driver airbag and front passenger airbag Can help protect the head and chest of the driver and front passenger from impact with interior components.
1-7.
1-7. Safety information ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, and parts of the front and rear pillars and roof side rail, may be hot for several minutes. The airbag itself may also be hot. ● The windshield may crack.
1-7. Safety information ■ SRS airbag deployment conditions (SRS front airbags) ● The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approximately 12 - 18 mph [20 - 30 km/h] frontal collision with a fixed wall that does not move or deform).
1-7. Safety information ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
1-7. Safety information ■ Types of collisions that may not deploy the SRS side airbags and curtain shield airbags The SRS side airbags and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
1-7. Safety information ■ When to contact your Toyota dealer In the following cases, contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ●A portion of a door is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side airbags and curtain shield airbags to inflate. ●The pad section of the steering wheel or dashboard (shaded in the illustration) is scratched, cracked, or otherwise damaged.
1-7. Safety information CAUTION ■ SRS airbag precautions Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. ● The driver and all passengers in the vehicle must wear their seat belts properly. The SRS airbags are supplemental devices to be used with the seat belts. ● The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag.
1-7. Safety information CAUTION ■ SRS airbag precautions ● The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag. The front passenger seat should be as far from the airbag as possible with the seatback adjusted, so the front passenger sits upright. ● Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag.
1-7. Safety information CAUTION ■ SRS airbag precautions ● Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger. ● Do not drive the vehicle while the driver or passenger has items resting on their knees. ● Do not lean against the door, the roof side rail or the front, side and rear pillars. ● Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle.
1-7. Safety information CAUTION ■ SRS airbag precautions ●Do not hang coat hangers or other hard objects on the coat hooks. All of these items could become projectiles and seriously injure or kill you, should the SRS curtain shield airbag deploy. ● Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags. ● Do not strike or apply significant levels of force to the area of the SRS airbag components (→P. 74).
1-7. Safety information CAUTION ■ SRS airbag precautions ● If breathing becomes difficult after the SRS airbag has deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so. Wash off any residue as soon as possible to prevent skin irritation. ● If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer.
1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger.
1-7.
1-7.
1-7. Safety information *4: Never install a rear-facing child restraint system on the front passenger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 90) *5: In case the indicator is not illuminated, consult this manual as for installing the child restraint system properly. (→P.
1-7. Safety information CAUTION ■ Front passenger occupant classification system precautions ● If an adult sits in the front passenger seat, the “AIR BAG ON” indicator light is illuminated. If the “AIR BAG OFF” indicator is illuminated, ask the passenger to sit up straight, well back in the seat, feet on the floor, and with the seat belt worn correctly.
1-7. Safety information Child restraint systems A child restraint system for a small child or baby must be properly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of U.S.A. and Canada now require the use of child restraint systems. Points to remember Studies have shown that installing a child restraint system on a rear seat is much safer than installing one to the front passenger seat.
1-7. Safety information Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child.
1-7. Safety information ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt. ● If a child is too large for a child restraint system, sit the child on a rear seat and use the vehicle's seat belt. (→P.
1-7. Safety information CAUTION ■ Child restraint precautions ● Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child.
1-7. Safety information Installing child restraints Follow the child restraint system manufacturer's instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Children) system.
1-7. Safety information Installation with LATCH system Type A Widen the gap between the seat cushion and seatback slightly. STEP 2 Latch the hooks of the lower straps onto the LATCH anchors. STEP 3 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors. For owners in Canada: A symbol on a child restraint system indicates the presence of a lower connector system.
1-7. Safety information Type B Canada only 96 MATRIX_U STEP 1 Widen the gap between the seat cushion and seatback slightly. STEP 2 Latch the buckles onto the LATCH anchors. STEP 3 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors. For owners in Canada: A symbol on a child restraint system indicates the presence of a lower connector system.
1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) ■ Rear facing Infant seat/convertible seat Place the child seat on the rear seat facing the rear of the vehicle. STEP 2 Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted. STEP 3 Fully extend the shoulder belt and then allow it to retract slightly in order to activate the ALR lock mode.
1-7. Safety information STEP 4 While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. ■ Forward facing Convertible seat STEP 1 Place the child seat on the seat facing the front of the vehicle. STEP 2 Run the seat belt through the child seat and insert the plate into the buckle.
1-7. Safety information While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. STEP 4 STEP 5 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchors. ■ Booster seat STEP 1 Place the booster seat on the seat facing the front of the vehicle. STEP 2 Sit the child in the booster seat.
1-7. Safety information Removing a child restraint installed with a seat belt Push the release button and fully retract the seat belt.
1-7. Safety information Child restraint systems with a top tether strap STEP 1 Secure the child restraint using the seat belt or the lower anchors, and remove the head restraint. 1 Before driving STEP 2 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. STEP 3 Replace the head restraint. ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2.
1-7. Safety information CAUTION ■ When installing a booster seat Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode: (→P. 49) ALR mode causes the belt to tighten only which could cause injury or discomfort to the child. ■ When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place.
1-7. Safety information CAUTION ■ When installing a child restraint system ● Ensure that the belt and tab are securely locked and the seat belt is not twisted. ● Push and pull the child seat from side to side and forward to be sure it is secure. ● After securing a child restraint system, never adjust the seat. ● Follow all installation instructions provided by the child restraint system manufacturer.
1-7.
When driving 2-1. Driving procedures Driving the vehicle............ Engine (ignition) switch .... Automatic transmission.... Manual transmission ........ Turn signal lever .............. Parking brake................... Horn ................................. 106 118 122 127 129 130 131 2-2. Instrument cluster Gauges and meters ......... 132 Indicators and warning lights .............................. 135 2-3. Operating the lights and wipers Headlight switch............... Fog light switch ..............
2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driving. ■ Starting the engine →P. 118 ■ Driving Automatic transmission STEP 1 With the brake pedal depressed, shift the shift lever to D. (→P. 122) STEP 2 Release the parking brake. STEP 3 Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle. (→P. 130) Manual transmission STEP 1 With the clutch pedal fully depressed, shift the shift lever to 1.
2-1. Driving procedures ■ Parking the vehicle Automatic transmission STEP 1 With the shift lever in D, depress the brake pedal. STEP 2 Set the parking brake. (→P. 130) STEP 3 Shift the shift lever to P. (→P. 122) When parking on a hill, if necessary, block the wheels. Turn the engine switch to the “LOCK” position and stop the engine. STEP 5 Lock the door, making sure that you have the key on your person. Manual transmission STEP 1 With the clutch pedal fully depressed, depress the brake pedal.
2-1. Driving procedures Starting on a steep uphill Automatic transmission STEP 1 Firmly set the parking brake and shift the shift lever to D. STEP 2 Gently depress the accelerator pedal. STEP 3 Release the parking brake. Manual transmission STEP 1 With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever to 1. STEP 2 Lightly depress the accelerator pedal at the same time as gradually releasing the clutch pedal. STEP 3 Release the parking brake.
2-1. Driving procedures ■ Breaking in your new Toyota To extend the life of the vehicle, the following precautions are recommended to observe: ● For the first 200 miles (300 km): Avoid sudden stops. ● For the first 500 miles (800 km): Do not tow a trailer. ● For the first 1000 miles (1600 km): 2 Do not drive at extremely high speeds. Avoid sudden acceleration. Do not drive slowly with the manual transmission in a high gear. Do not drive at a constant speed for extended periods.
2-1. Driving procedures CAUTION ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. ■ When driving the vehicle ● Do not drive if you are unfamiliar with the location of the brake and accelerator pedals to avoid depressing the wrong pedal.
2-1. Driving procedures CAUTION ● If the smell of exhaust is noticed inside the vehicle, open the windows and check that the back door is closed. Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately. ● Vehicles with an automatic transmission: Do not shift the shift lever to P while the vehicle is moving.
2-1. Driving procedures CAUTION ● When stopped on an inclined surface, use the brake pedal and parking brake to prevent the vehicle from rolling backward or forward and causing an accident. ● Do not adjust the position of the steering wheel, the seat, or the inside or outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury.
2-1. Driving procedures CAUTION ■ When shifting the shift lever (vehicles with an automatic transmission) Be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury. ■ When the vehicle is stopped ● Do not race the engine.
2-1. Driving procedures CAUTION ● Always apply the parking brake, shift the shift lever to P (vehicles with an automatic transmission), stop the engine and lock the vehicle. Do not leave the vehicle unattended while the engine is running. ● Do not touch the exhaust pipe while the engine is running or immediately after turning the engine off. Doing so may cause burns. ● Do not leave the engine running in an area with snow build-up, or where it is snowing.
2-1. Driving procedures CAUTION ■ When braking the vehicle ● When the brakes are wet, drive more cautiously. Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle. ● Do not pump the brake pedal if the engine stalls. Each push on the brake pedal uses up the reserve for the power-assisted brakes.
2-1. Driving procedures NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. Manual transmission ● Do not shift gears unless the clutch pedal is fully depressed. After shifting, do not release the clutch pedal abruptly. Doing so may damage the clutch, transmission and gears. ● Observe the following to prevent the clutch from being damaged. • Do not rest your foot on the clutch pedal while driving.
2-1. Driving procedures NOTICE ■ If you hear a squealing or scraping noise (brake pad wear limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage can result if the pads are not replaced when needed. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded. 2 ■ If you get a flat tire while driving ● It may be difficult to control your vehicle.
2-1. Driving procedures Engine (ignition) switch ■ Starting the engine Automatic transmission STEP 1 Check that the parking brake is set. STEP 2 Check that the shift lever is set in P. STEP 3 Sit in the driver’s seat and firmly depress the brake pedal. STEP 4 Turn the engine switch to the “START” position and start the engine. 1.8 L 4-cylinder (2ZR-FE) engine: The engine will crank until it starts or for up to 25 seconds, whichever is less.
2-1. Driving procedures ■ Changing engine switch position “LOCK” The steering wheel is locked and the key can be removed. (Vehicles with an automatic transmission: The key can be removed only when the shift lever is in P.) 2 “ACC” “ON” All electrical components can be used. “START” For starting the engine. 119 MATRIX_U When driving Some electrical components such as the audio system can be used.
2-1. Driving procedures ■ Turning the engine switch from “ACC” to “LOCK” STEP 1 Shift the shift lever to P (auto- matic transmission) or N (manual transmission). (→P. 122, 127) STEP 2 Push in the key and turn to the “LOCK” position. ■ Steering lock release When starting the engine, the engine switch may seem stuck in the “LOCK” position. To free it, turn the key while turning the steering wheel slightly in either direction.
2-1. Driving procedures NOTICE ■ To prevent battery discharge Do not leave the key in the “ACC” or “ON” position for long periods if the engine is not running. ■ When starting the engine ● 2.4 L 4-cylinder (2AZ-FE) engine Do not crank for more than 30 seconds at a time. This may overheat the starter and wiring systems. ● Do not race a cold engine. 121 MATRIX_U When driving ● If the engine becomes difficult to start or stalls frequently, have the engine checked immediately.
2-1. Driving procedures Automatic transmission∗ Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever Standard type Multi-mode type While the engine switch is in the “ON” position, depress the brake pedal and move the shift lever.
2-1. Driving procedures ■ Shift position uses Shift position Function Standard type Multi-mode type P Parking the vehicle or starting the engine R Reversing N Neutral D Normal driving*1 2 3 Position for engine braking 2 Position for more powerful engine braking L Position for maximum engine braking When driving S mode driving*2 (→P. 124) S *1: Shifting to the D position allows the system to select a gear suitable for driving conditions.
2-1. Driving procedures Changing shift ranges in S mode (multi-mode type) Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 4 or 5. However, the initial shift range may be set to 3 if AI-SHIFT has operated while the shift lever was in the D position. (→P. 126) When the shift range is 4 or lower, holding the shift lever toward “+” sets the shift range to 5.
2-1. Driving procedures ■ Shift ranges and their functions Function 5 A gear between 1 and 5 is automatically selected according to vehicle speed and driving conditions. 4 A gear between 1 and 4 is automatically selected according to vehicle speed and driving conditions. 3 A gear between 1 and 3 is automatically selected according to vehicle speed and driving conditions. 2 A gear between 1 and 2 is automatically selected according to vehicle speed and driving conditions. 1 Setting the gear at 1.
2-1. Driving procedures ■ Downshifting restrictions warning buzzer (multi-mode type S mode) To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever is operated. (The warning buzzer will sound twice.) ■ When driving with the cruise control system (if equipped) Standard type Engine braking will not operate, even when downshifting to 3. (→P.
2-1. Driving procedures Manual transmission∗ ■ Shifting the shift lever Fully depress the clutch pedal before operating the shift lever, and then release the clutch pedal slowly. 2 Observe the following maximum allowable speeds in each gear when maximum acceleration is necessary. 2.
2-1. Driving procedures 2.4 L 4-cylinder (2AZ-FE) engine (with double wishbone rear suspension) mph (km/h) Shift position Maximum speed 1 31 (50) 2 54 (87) 3 83 (134) 4 113 (183) 1.
2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. The left hand signal will flash until you release the lever. ■ Turn signals can be operated when The engine switch is in the “ON” position. ■ If the indicators flash faster than usual Check that a light bulb in the front or rear turn signal lights has not burned out.
2-1. Driving procedures Parking brake U.S.A. Canada Sets the parking brake Fully set the parking brake while depressing the brake pedal. Releases the parking brake Slightly raise the lever and lower it completely while pressing the button. ■ Usage in winter time See “Winter driving tips” for parking brake usage in winter time. (→P. 162) NOTICE ■ Before driving Fully release the parking brake.
2-1. Driving procedures Horn To sound the horn, press on or close to the mark. 2 When driving ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
2-2. Instrument cluster Gauges and meters The following gauges, meters and displays illuminate when the engine switch is in the “ON” position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Outside temperature display Displays the outside air temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
2-2. Instrument cluster Engine coolant temperature gauge Displays the engine coolant temperature. Automatic equipped) transmission shift position indicator lights (if →P. 122 Odometer and trip meter Odometer: Displays the total distance the vehicle has been driven. 2 Low fuel level warning light →P. 400 133 MATRIX_U When driving Trip meter: Displays the distance the vehicle has been driven since the meter was last reset.
2-2. Instrument cluster Instrument panel light control The brightness of the instrument panel lights can be adjusted. Darker Brighter When the headlight switch is turned on, the brightness will be reduced slightly unless the control button is turned fully clockwise. ■ Display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change.
2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems.
2-2. Instrument cluster ■ Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator (→P. 129) Headlight high beam indicator (→P. 139) * 1, 2 Slip indicator (→P. 153) Engine immobilizer system indicator (→P. 68) *1 *1 VSC off indicator (→P. 154) “TRAC OFF” indicator (→P. 153) (U.S.A.) (Canada) (if equipped) *1 (if equipped) (if equipped) Headlight indicator (→P. 138) Tail light indicator (→P. 138) Front fog light indicator (→P.
2-2. Instrument cluster ■ Warning lights Warning lights inform the driver of malfunctions in any of the vehicle’s systems. (→P. 397) *1 *1 (Canada) *1 *1 (Canada) (U.S.A.) * *1 *1 (if equipped) (Canada) *1 *1 (U.S.A.) (Canada) *1 *2 *1 *1 (U.S.A.) *1 2 (if equipped) When driving (U.S.A.
2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually. Type A The daytime running lights turn on. The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. The headlights and all lights listed above (except daytime running lights) turn on.
2-3. Operating the lights and wipers Type B The daytime running lights turn on. The headlights and all lights listed above (except daytime running lights) turn on. Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams. Release the lever to turn them off. You can flash the high beams with the headlights on or off.
2-3. Operating the lights and wipers ■ Daytime running light system ● To make your vehicle more visible to other drivers, the headlights turn on automatically whenever the engine is started and the parking brake is released. ● Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve fuel economy.
2-3. Operating the lights and wipers Fog light switch∗ The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam.
2-3.
2-3. Operating the lights and wipers Windshield wipers and washer Wiper can be operated manually.
2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically.
2-3. Operating the lights and wipers Wash/wipe operation Wipers operate automatically. 2 When driving ■ The windshield wipers and washers can be operated when The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir. NOTICE ■ When the windshield is dry Do not use the wipers, as they may damage the windshield.
2-3. Operating the lights and wipers Rear window wiper and washer∗ Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper operation dual Wiper operates automatically. Washer/wiper operation dual Wiper operates automatically.
2-3. Operating the lights and wipers Type B Intermittent window wiper operation Normal window wiper operation Washer/wiper operation dual 2 Wiper operates automatically. dual Wiper operates automatically. ■ The rear window wiper and washer can be operated when The engine switch is in “ON”. NOTICE ■ When the rear window is dry Do not use the wipers, as they may damage the rear window.
2-4. Using other driving systems Cruise control∗ Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicators Cruise control switch ■ Setting the vehicle speed STEP 1 Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on. Press the button again to deactivate the cruise control. STEP 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed. “SET” indicator will come on.
2-4. Using other driving systems ■ Adjusting the speed setting To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. The set speed will be increased or decreased as follows: Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is operated. Large adjustment: The set speed can be increased or decreased continually until the lever is released.
2-4. Using other driving systems ■ Canceling and resuming the constant speed control Pulling the lever toward you cancels the constant speed control. The speed setting is also canceled when the brakes are applied or the clutch pedal (manual transmission only) is depressed. Pushing the lever up resumes the constant speed control. Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
2-4. Using other driving systems ■ Automatic cruise control cancelation Cruise control will stop maintaining the vehicle speed in any of the following situations. ● Actual vehicle speed falls more than approximately 10 mph (16 km/h) below the preset vehicle speed. At this time, the memorized set speed is not retained. ● Actual vehicle speed is below approximately 25 mph (40 km/h). ● VSC is activated.
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ■ ABS (Anti-lock Brake System) Helps to prevent wheel lock when the brakes are applied suddenly, or if the brakes are applied while driving on a slippery road surface.
2-4. Using other driving systems When VSC and TRAC are operating If the vehicle is in danger of slipping or the front wheels (2WD), or 4 wheels (AWD) spin, the indicator flashes to indicate that VSC/TRAC have been engaged. 2 If the vehicle gets stuck in fresh snow or mud, TRAC and VSC may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. ■ Turning off TRAC Quickly push and release the switch to turn off TRAC.
2-4. Using other driving systems ■ Turning off TRAC and VSC Push and hold the switch while the vehicle is stopped to turn off TRAC and VSC. The “TRAC OFF” indicator light and VSC off indicator light should come on. Push the switch again to turn the system back on. ■ When the “TRAC OFF” indicator light comes on even if the VSC off switch has not been pressed TRAC cannot be operated. Contact your Toyota dealer.
2-4. Using other driving systems ■ If the slip indicator light comes on There is a malfunction in the TRAC and VSC systems. Contact your Toyota dealer and have your Toyota inspected. ■ EPS system operation sound When the steering wheel is operated, a motor sound (whirring sound) may be heard. This does not indicate a malfunction.
2-4. Using other driving systems CAUTION ■ When VSC is activated The slip indicator light flashes. Always drive carefully. Reckless driving may cause an accident. Exercise particular care when the indicator light flashes. ■ When TRAC and VSC are off Be especially careful and drive at a speed appropriate to the road conditions. As these are systems to ensure vehicle stability and driving force, do not turn off TRAC and VSC unless necessary.
2-5. Driving information Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far forward as possible helps maintain vehicle balance. ● For better fuel economy, do not carry unnecessary weight. 2 Cargo capacity depends on the total weight of the occupants.
2-5. Driving information (6)If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. (→P. 167) Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle capacity weight) (→P. 438) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb.
2-5. Driving information As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
2-5. Driving information CAUTION ■ Storage precautions Observe the following precautions. Failing to do so may result in death or serious injury. ● To prevent cargo and luggage from sliding forward during braking, do not stack anything in the luggage compartment. Keep cargo and luggage low, as close to the floor as possible. ● Never allow anyone to ride in the luggage compartment. It is not designed for passengers. They should ride in their seats with their seat belts properly fastened.
2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, trailer weight rating and cargo capacity. ■ Total load capacity (vehicle capacity weight): (→P. 438) Total load capacity means the combined weight of occupants, cargo and luggage. ■ Seating capacity: 5 occupants (Front 2, Rear 3) Seating capacity means the maximum number of occupants whose estimated average weight is 150 lb. (68 kg) per person. When driving ■ Trailer weight rating 1.
2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. ■ Pre-winter preparations ● Use fluids that are appropriate to the prevailing outside temperatures. • Engine oil • Engine coolant • Washer fluid ● Have a service technician inspect the level and specific gravity of battery electrolyte.
2-5. Driving information ■ When driving the vehicle Accelerate the vehicle slowly and drive at a reduced speed suitable to road conditions. ■ When parking the vehicle Park the vehicle and move the shift lever to P (automatic transmission), 1 or R (manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released. If necessary, block the wheels to prevent inadvertent sliding or creeping. Snow chains can be mounted on 16- and 17-inch tires.
2-5. Driving information ■ Snow chain installation (vehicles with 16-inch and 17-inch tires) Observe the following precautions when installing and removing chains. ● Install and remove tire chains in a safe location. ● Install tire chains on the front tires only. Do not install tire chains on rear tires. ● Install tire chains following the instructions provided in the accompanying manual. CAUTION ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents.
2-5. Driving information NOTICE ■ Repairing or replacing snow tires Request repairs of and obtain replacement snow tires from Toyota dealers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters. ■ Fitting tire chains The tire pressure warning valves and transmitters may not function correctly when tire chains are fitted.
2-5. Driving information Trailer towing (1.8 L 4-cylinder [2ZR-FE] engine) Toyota does not recommend towing a trailer with your vehicle. Toyota also does not recommend the installation of a tow hitch or the use of a tow hitch carrier for a wheelchair, scooter, bicycle, etc. Your Toyota is not designed for trailer towing or for the use of tow hitch mounted carriers.
2-5. Driving information Trailer towing (2.4 L 4-cylinder [2AZ-FE] engine) Your vehicle is designed primarily as a passenger-and-load-carrying vehicle. Towing a trailer can have an adverse impact on handling, performance, braking, durability, and fuel consumption. For your safety and the safety of others, you must not overload your vehicle or trailer.
2-5. Driving information ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle. When towing a trailer, it is the sum of the vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the tongue weight. ■ GAWR (Gross Axle Weight Rating) Front GAWR Rear GAWR 168 MATRIX_U The maximum allowable gross axle weight.
2-5. Driving information ■ TWR (Trailer Weight Rating) (With brakes) The maximum allowable gross trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. Additional optional equipment, passengers and cargo in the vehicle will reduce the trailer weight rating so as not to exceed GCWR, GVWR and GAWR.
2-5. Driving information ■ Tongue Weight The load placed on the trailer hitch ball. (→P. 171) Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (→P. 171) ● The gross combination weight must never exceed the GCWR described in the table. (→P. 171) ● The gross vehicle weight must never exceed the GVWR indicated on the Certification Label. ● The gross axle weight on each axle must never exceed the GAWR indicated on the Certification Label.
2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR* and TWR* Driving system Grade 2WD XRS grade AWD GCWR Automatic transmission 4975 lb. (2257 kg) Manual transmission 4900 lb. (2223 kg) Automatic transmission 5055 lb. (2293 kg) Manual transmission 4975 lb. (2257 kg) 5195 lb.
2-5. Driving information Gross trailer weight Tongue weight The gross trailer weight, gross axle weight and tongue weight can be measured with platform scales found at a highway weighing station, building supply company, trucking company, junk yard, etc. Hitch Trailer hitch assemblies have different weight capacities. Toyota recommends the use of Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer.
2-5. Driving information Positions for towing hitch receiver and hitch ball Weight carrying ball position: 36.2 in. (920.3 mm) Hitch receiver pin hole position: 29.1 in. (739.4 mm) 2 Please consult your dealer when installing trailer lights, as incorrect installation may cause damage to the vehicle’s lights. Please take care to comply with your state’s laws when installing trailer lights. Trailer towing tips Your vehicle will handle differently when towing a trailer.
2-5. Driving information ● Practice turning, stopping and reversing with the trailer attached in an area away from traffic until you become accustomed to the feel of the vehicle-trailer combination. ● Reversing with a trailer attached is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to the right. (This is generally opposite to reversing without a trailer attached.
2-5. Driving information ● Automatic transmission: To maintain engine braking efficiency and charging system performance when using engine braking, do not put the transmission in “D”. If in the S mode, the transmission shift gear position must be in 4 or lower. ● Manual transmission: To maintain engine braking efficiency and charging system performance when using engine braking, do not use fifth gear. ● Avoid holding the brake pedal down too long or applying the brakes too frequently.
2-5. Driving information STEP 4 Apply the parking brake firmly. STEP 5 Shift into 1 or R (manual transmission) or P (automatic transmission) and turn off the engine. ● When restarting after parking on a slope: STEP 1 With the transmission in P (automatic transmission) or the clutch pedal (manual transmission) depressed, start the engine. On vehicles with an automatic transmission, be sure to keep the brake pedal depressed. STEP 2 Shift into a forward gear. If reversing, shift into R.
2-5. Driving information ■ Before towing Check that the following conditions are met: ● Ensure that your vehicle’s tires are properly inflated. (→P. 451) ● Trailer tires are inflated according to the trailer manufacturer’s recommendation. ● All trailer lights work as required by law. ● All lights work each time you connect them. ● The trailer ball is set at the proper height for the coupler on the trailer. 2 ● The trailer cargo is securely loaded.
2-5. Driving information ■ If trailer sway occurs One or more factors (crosswinds, passing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer, causing instability. ● If trailer swaying occurs: • Firmly grip the steering wheel. Steer straight ahead. Do not try to control trailer swaying by turning the steering wheel. • Begin releasing the accelerator pedal immediately but very gradually to reduce speed. Do not increase speed. Do not apply vehicle brakes.
2-5. Driving information CAUTION ■ To avoid accident or injury ● Do not exceed the TWR, unbraked TWR, GCWR, GVWR or GAWR. ● Adjust the tongue weight within the appropriate range. Place heavier loads as close to the trailer axle as possible. ● Do not make jerky, abrupt or sharp turns. ● Do not apply the brakes suddenly as you may skid, resulting in jackknifing and loss of vehicle control. This is especially true on wet or slippery surfaces.
2-5. Driving information CAUTION ■ Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be physically capable of towing a higher weight, the operator must determine the maximum weight rating of the particular hitch assembly and never exceed the maximum weight rating specified for the trailer-hitch.
2-5. Driving information Dinghy towing (automatic transmission) Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with 4 wheels on the ground. 2 When driving ■ To prevent causing serious damage to the transmission and Active Torque Control 4WD system (AWD models) 2WD models: Never tow this vehicle from the rear with the front wheels on the ground.
2-5. Driving information Dinghy towing (manual transmission) Your vehicle can be dinghy towed in a forward direction (with 4 wheels on the ground) behind a motor home. Towing your vehicle with 4 wheels on the ground To prevent damage to your vehicle, perform the following procedures before towing. STEP 1 Shift the shift lever to N. STEP 2 Switch to the “ACC” position. (→P. 118) Ensure that the audio system and other powered devices have been turned off. STEP 3 Release the parking brake.
2-5. Driving information NOTICE ■ Dinghy towing direction Do not tow the vehicle backwards. Doing so may cause serious damage. 2 When driving ■ To prevent the steering from locking Ensure the engine switch is in the “ACC” position.
3-1. Using the air conditioning system and defogger Air conditioning system .... 186 Rear window and outside rear view mirror defoggers ............ 193 3-2. Using the audio system Audio system types.......... Using the radio................. Using the CD player......... Playing MP3 and WMA discs............................... Operating an iPod ............ Operating a USB memory .......................... Optimal use of the audio system ........................... Using the AUX port ..........
Interior features 3-3. Using the Bluetooth® audio system 3-6. Using the storage features Bluetooth® audio/ phone............................. 251 Using the Bluetooth® audio/phone ................... 254 Operating a Bluetooth® enabled portable player ............................. 259 3-4. Using the hands-free phone system (for cellular phone) Making a phone call ......... 262 Using the “SET UP” menu (“Bluetooth” menu)......... 267 Using the “SET UP” menu (“Phone” menu).............. 273 3-5.
3-1.
3-1. Using the air conditioning system and defogger Adjusting the settings ■ Adjusting the temperature setting (heater) Turn the temperature control dial clockwise to increase the temperature. ■ Adjusting the temperature setting (air conditioning system) Turn the temperature control dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air. 3 ■ Adjusting the fan speed Set the dial to “0” to turn the fan off.
3-1. Using the air conditioning system and defogger Air flows to the upper body and feet. : Some models Mainly air flows to the feet. : Some models Air flows to the feet and the windshield defogger operates. The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on.
3-1. Using the air conditioning system and defogger Air flows to the windshield and side windows. The air intake is automatically switched to outside air mode. It is not possible to return to recirculated air mode when the switch is on. ■ Switching air intake modes Press . The mode switches between outside air mode (indicator off) and recircuis pressed.
3-1. Using the air conditioning system and defogger Adjusting the position of and opening and closing the air outlets Adjusting the position Direct air flow to the left or right, up or down.
3-1. Using the air conditioning system and defogger ■ For quick cooling (vehicles with air conditioning system) Turn the temperature control dial to the “MAX A/C” position and select the recirculated air mode. ■ For quick clearing of the windshield and side windows (vehicles with air conditioning system) Press to turn the air conditioning on. ■ Using the recirculated air mode The windows will fog up more easily if the recirculated air mode is used for an extended period.
3-1. Using the air conditioning system and defogger NOTICE ■ To prevent battery discharge Do not leave the air conditioning system on longer than necessary when the engine is stopped.
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers Clear the rear window using the defogger. On/off The defoggers will automatically turn off after approximately 15 minutes. 3 ■ Outside rear view mirror defogger (if equipped) CAUTION ■ Outside rear view mirror defogger (if equipped) The surfaces of the outside rear view mirrors become hot. Do not touch them to prevent from burning yourself.
3-2.
3-2. Using the audio system Title Page Using the radio P. 203 Using the CD player P. 207 Playing MP3 and WMA discs P. 215 Operating an iPod P. 225 Operating a USB memory P. 234 Optimal use of the audio system P. 242 Using the AUX port P. 246 Using the steering wheel audio switches P. 248 3 With Display Audio system 195 MATRIX_U Interior features Owners of models equipped with a Display Audio system should refer to the “Display Audio System Owner's Manual”.
3-2. Using the audio system ■ Using cellular phones Interference may be heard through the audio system's speakers if a cellular phone is being used inside or close to the vehicle while the audio system is operating. ■ About Bluetooth® The Bluetooth wordmark and logo are owned by Bluetooth SIG. and permission has been granted to use the trademark of the licensee Panasonic Corporation. Other trademarks and trade names are owned by various different owners.
3-2. Using the audio system CAUTION ■ For vehicles sold in U.S.A. and Canada (type A) ● Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. ● Laser products 197 MATRIX_U 3 Interior features • Do not take this unit apart or attempt to make any changes yourself. This is an intricate unit that uses a laser pickup to retrieve information from the surface of compact discs.
3-2. Using the audio system CAUTION ■ U.S.A. (type B) FCC ID: ACJ932PTA184 FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
3-2. Using the audio system CAUTION ■ U.S.A. (with Display Audio system) FCC ID: ACJ932CQ-US70G0 FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. ● Laser products • Do not take this unit apart or attempt to make any changes yourself.
3-2. Using the audio system CAUTION ■ Canada (type B and Display Audio system) This device standard(s). complies with Industry Canada licence-exempt RSS Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
3-2. Using the audio system CAUTION This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE).
3-2. Using the audio system NOTICE ■ To prevent battery discharge Do not leave the audio system on longer than necessary with the engine off. ■ To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.
3-2.
3-2. Using the audio system Setting station presets Type A STEP 1 “∨” on STEP 2 or pressing “∧” or Search for desired stations by turning . Press and hold the button (from is to be set to until you hear a beep. to ) the station Type B STEP 1 Search for desired stations by turning or “∨” on STEP 2 or pressing “∧” . Press and hold a button (from a beep. to ) until you hear Scanning radio stations ■ Scanning the preset radio stations STEP 1 Press and hold or until you hear a beep.
3-2. Using the audio system Switching the display Type A Press . Each time is pressed, the display changes in the following order: Title (song/program title) → Name (artist name/feature)/Title (song/program title). Type B Press . If the text continues past the end of the display, “ ” is displayed. Press .
3-2. Using the audio system NOTICE ■ To prevent damage, remove the antenna in the following cases. ● The antenna will touch the ceiling of a garage. ● A cover will be put on the roof.
3-2.
3-2. Using the audio system Loading CDs Insert a CD. Ejecting CDs Press or and remove the CD. Selecting a track Type A Press “∧” to move up or “∨” to move down using until the desired track number is displayed. Type B or press “∧” to move up or “∨” to move down using Turn until the desired track number is displayed. Fast-forwarding and reversing tracks Type A Press (reverse) or (fast-forward). Type B To fast-forward or reverse, press 208 MATRIX_U ( ) or ( ).
3-2. Using the audio system Selecting a track from a track list (type B) STEP 1 Press . The track list will be displayed. STEP 2 Turn and press to select a track. To return to the previous display, press (BACK). Scanning tracks Type A STEP 1 Press 3 . The first ten seconds of each track will be played. STEP 2 Press Interior features To cancel, press again. again when the desired track is reached. Type B STEP 1 Press . The first ten seconds of each track will be played.
3-2. Using the audio system Repeat play Type A ■ Repeating a track Press (RPT). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Repeating all of the tracks on a CD (with a CD changer) Press and hold (RPT) until you hear a beep. To cancel, press the button again. Type B Press (RPT). To cancel, press the button once more. Random playback ■ Current CD Type A Press (RAND). Songs are played in random order.
3-2. Using the audio system Switching the display Type A Press . Each time is pressed, the display changes in the following order: Track no./Elapsed time → CD title → Track name. Type B Press . Track title, Artist name and Disc title are shown on the display. To return to the previous display, press or (BACK). 3 Up to 12 characters can be displayed at a time. If there are 13 characters or more, pressing and holding or for 1 second or more will display the remaining characters.
3-2. Using the audio system ■ Error messages “ERROR” (type B): This indicates a problem either in the CD or inside the player. “CD CHECK” (type A): This indicates a problem either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down. “CD CHECK” (type B): The CD may be dirty, damaged or inserted up-side down. “WAIT” or “PLEASE WAIT”: Operation has stopped due to a high temperature inside the player. Wait for a while and then press or .
3-2. Using the audio system NOTICE ■ CDs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, DualDiscs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ●CDs that have a diameter that is not 4.7 in.
3-2. Using the audio system NOTICE ■ CD player precautions Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ● Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player. ● Store CDs away from direct sunlight. ● Never try to disassemble any part of the CD player.
3-2.
3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 208 Selecting MP3 and WMA discs (with a CD changer) (type A) →P. 209 Selecting and scanning a folder Type A ■ Selecting folders one at a time Press “∧” or “∨” on to select the desired folder. ■ Scanning the first file of all the folders STEP 1 Press and hold until you hear a beep. The first ten seconds of the first file in each folder will be played.
3-2. Using the audio system Type B ■ Selecting folders one at a time Press ( ) or ( ) to select the desired folder. ■ Selecting a folder and file from a folder list STEP 1 Press . The folder list will be displayed. STEP 2 Turn and press to select a folder and a file. To return to the previous display, press (BACK). 3 ■ Returning to the first folder ( ) until you hear a beep. ■ Scanning a folder STEP 1 Press and hold until you hear a beep.
3-2. Using the audio system Fast-forwarding and reversing files →P. 208 Repeat play ■ Repeating a file (type A) Press (RPT). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Repeating all of the files in a folder Type A Press and hold (RPT) until you hear a beep. To cancel, press the button again.
3-2. Using the audio system Random playback Type A ■ Playing files from a particular folder in random order Press (RAND). To cancel, press the button once more (without a CD changer), or twice more (with a CD changer). ■ Playing all of the files on a disc in random order Press and hold (RAND) until you hear a beep. To cancel, press the button again.
3-2. Using the audio system ■ Display →P. 211 ■ Error messages “CD CHECK”: This indicates a problem either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down. “NO MUSIC” (type A): This indicates that MP3/WMA files are not included in the CD. “WAIT” or “PLEASE WAIT” (type A): Operation has stopped due to a high temperature inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played.
3-2. Using the audio system ■ MP3 and WMA files MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.
3-2. Using the audio system ● Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CDRWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints. ● Compatible disc formats The following disc formats can be used.
3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
3-2. Using the audio system NOTICE ■ CDs that cannot be used (→P. 213) ■ CD player precautions (→P.
3-2. Using the audio system Operating an iPod∗ Connecting an iPod enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod STEP 1 Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. 3 STEP 2 Press .
3-2.
3-2. Using the audio system Selecting a play mode STEP 1 Press (MENU) to select iPod menu mode. STEP 2 Turning clockwise changes the play mode in the fol- lowing order: “Playlists”→“Artists”→“Albums”→“Songs”→“Podcasts”→“Genres” →“Composers”→“Audiobooks” STEP 3 Press to select the desired play mode.
3-2. Using the audio system ■ Selecting a list STEP 1 Turn STEP 2 Press to display the first selection list. to select the desired item. Pressing the knob changes to the second selection list. STEP 3 Repeat the same procedure to select the desired item. To return to the previous selection list, press (BACK). Selecting songs Turn or press “∧” or “∨” on to select the desired song. Selecting a song from the song list STEP 1 Press . The song list will be displayed.
3-2. Using the audio system Fast-forwarding and reversing songs To fast-forward or reverse, press ( ) or ( ). Shuffle playback Pressing (RDM) changes modes in the following order: Track shuffle → Album shuffle → Off Repeat play (RPT). Press To cancel, press 3 (RPT) again. Interior features Switching the display Press . To return to the previous display, press or (BACK). Adjusting sound quality and volume balance STEP 1 Press to enter iPod menu mode. STEP 2 Press to change sound modes.
3-2. Using the audio system ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. ● Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
3-2. Using the audio system ■ iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner's Manual. ■ Display →P. 211 ■ Error messages This indicates that the data in the iPod cannot be read. “ERROR 3”: This indicates that the iPod may be malfunctioning. “ERROR 4”: This indicates that an overcurrent error has occurred.
3-2. Using the audio system ■ Compatible models The following iPod, iPod nano, iPod classic, iPod touch and iPhone devices can be used with this system.
3-2. Using the audio system NOTICE ■ To prevent damage to iPod ● Do not leave the iPod in the vehicle. The temperature inside may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the iPod while it is connected as this may damage the iPod or its terminal. ● Do not insert foreign objects into the port as this may damage the iPod or its terminal.
3-2. Using the audio system Operating a USB memory∗ Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory STEP 1 Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on. STEP 2 Press .
3-2.
3-2. Using the audio system Selecting a folder ■ Selecting folders one at a time To select the desired folder, press ( ) or ( ). ■ Selecting a folder and file from a folder list STEP 1 Press . The folder list will be displayed. STEP 2 Turn and press to select a folder and a file. To return to the previous display, press (BACK). ■ Returning to the first folder Press and hold ( ) until you hear a beep. Scanning a folder STEP 1 Press and hold until you hear a beep.
3-2. Using the audio system Scanning files STEP 1 Press . The first 10 seconds of all files in the folder will be played. STEP 2 When the desired file is reached, press again. Fast-forwarding and reversing files →P.
3-2. Using the audio system ■ USB memory functions ● Depending on the USB memory that is connected to the system, the device itself may not be operable and certain functions may not be available. If the device is inoperable or a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and reconnecting it once again may resolve the problem. ● If the USB memory still does not begin operation after being disconnected and reconnected, format the memory.
3-2. Using the audio system ● MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.
3-2. Using the audio system ● ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
3-2. Using the audio system NOTICE ■ To prevent damage to a USB memory ● Do not leave a USB memory in the vehicle. The temperature inside may become high, resulting in damage to the player. ● Do not push down on or apply unnecessary pressure to the USB memory while it is connected as this may damage the USB memory or its terminal. ● Do not insert foreign objects into the port as this may damage the USB memory or its terminal.
3-2.
3-2. Using the audio system Using the audio control function ■ Changing sound quality modes Type A Pressing selects the mode to be changed in the following order. “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B Press . STEP 2 Turn to select “Sound Setting”. STEP 3 Press . STEP 4 Turn to select the desired mode. 3 Interior features STEP 1 “BASS”, “TREBLE”, “FADER”, “BALANCE”, or “ASL” STEP 5 Press .
3-2. Using the audio system ■ Adjusting sound quality Turning or adjusts the level. Type A Mode displayed Sound quality mode Level Turn to the left Turn to the right “BAS” Bass* -5 to 5 “TRE” Treble* -5 to 5 Low High “FAD” Front/rear volume balance R7 to F7 Shifts to rear Shifts to front “BAL” Left/right volume balance L7 to R7 Shifts to left Shifts to right *: The sound quality level is adjusted individually in each radio mode or CD mode.
3-2. Using the audio system Type B Mode displayed Sound quality mode Level Turn to the left Turn to the right “BASS” Bass* -5 to 5 “TREBLE” Treble* -5 to 5 Low High “FADER” Front/rear volume balance F7 to R7 Shifts to rear Shifts to front “BALANCE” Left/right volume balance L7 to R7 Shifts to left Shifts to right 3 *: The sound quality level is adjusted individually in each audio mode.
3-2. Using the audio system Using the AUX port This port can be used to connect a portable audio device and listen to it through the vehicle’s speakers. Type A STEP 1 Open the cover and connect the portable audio device. STEP 2 Press . Type B STEP 1 246 MATRIX_U Open the cover and connect the portable audio device.
3-2. Using the audio system STEP 2 Press . ■ Operating portable audio devices connected to the audio system The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself. Noise may occur during playback. Use the power source of the portable audio device.
3-2. Using the audio system Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ and usage may not be possible with audio/navigation systems that are not compatible with the steering switches in this vehicle.
3-2. Using the audio system Changing the audio source Press when the audio system is turned on. The audio source changes each time is pressed. If a mode cannot be used, it will be skipped. Adjusting the volume Press “+” on to increase the volume and “-” to decrease the vol- ume. Press and hold to continue increasing or decreasing the volume. 3 STEP 1 Press to select the radio mode. STEP 2 Press to select a preset station.
3-2. Using the audio system Selecting a track/file or song STEP 1 Press to select CD, iPod, USB memory or Bluetooth® audio mode. STEP 2 Press “∧” or “∨” on to select the desired track/file or song. Selecting a folder or album to select CD, USB memory or Bluetooth® audio STEP 1 Press mode. STEP 2 Press and hold “∧” or “∨” on until you hear a beep. Selecting a disc in the CD player (CD player with changer only) STEP 1 Press to select CD mode.
3-3. Using the Bluetooth® audio system Bluetooth® audio/phone∗ ■ Bluetooth® audio The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your portable player does not support Bluetooth®, the Bluetooth® audio system will not function.
3-3. Using the Bluetooth® audio system ■ When transferring ownership of the vehicle Be sure to initialize the system to prevent personal data from being improperly accessed. (→P. 272) ■ About Bluetooth® Bluetooth is a registered trademark of Bluetooth SIG. Inc. ■ Compatible models ● Bluetooth® specifications: Ver. 1.1, or higher (recommended: Ver. 2.1 + EDR or higher) ● Following Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (recommended: Ver. 1.
3-3. Using the Bluetooth® audio system CAUTION ■ Caution while driving ● Do not use a cellular phone. ● Do not connect Bluetooth® device or operate the controls. ■ Caution regarding interference with electronic devices ● Your audio unit is fitted with Bluetooth® antennas. People with implanted pacemakers or cardiac defibrillators should maintain a reasonable distance between themselves and the Bluetooth® antennas. The radio waves may affect the operation of such devices.
3-3. Using the Bluetooth® audio system Using the Bluetooth® audio/phone ■ Audio unit Bluetooth® connection condition If “BT” is not displayed, the audio/phone Bluetooth® cannot be used. Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed.
3-3. Using the Bluetooth® audio system ■ Steering wheel switches →P.
3-3. Using the Bluetooth® audio system Using the Bluetooth® audio/phone for the first time Before using the Bluetooth® audio/phone, it is necessary to register a Bluetooth® device in the system. Follow the procedure below to register (pair) a device: STEP 1 Press STEP 2 Press and select “Bluetooth” using and select “Pairing” using . . A passkey will be displayed. STEP 3 SSP (Secure Simple Pairing) incompatible Bluetooth® devices: Input the passkey into the device.
3-3.
3-3.
3-3. Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Power Volume Selecting an album, fast-forwarding and rewinding Repeat play Random playback Selecting items Selecting a track 3 Playback/Pause Interior features Playback Search playback Displays text message Selecting an album Press ( ) or ( ) to select the desired album. Scanning an album STEP 1 Press and hold until you hear a beep.
3-3. Using the Bluetooth® audio system Scanning tracks STEP 1 Press . The first 10 seconds of all tracks in the album will be played. STEP 2 When the desired track is reached, press again. Playing and pausing tracks Press ( ) to play or pause a track. Fast-forwarding and reversing tracks →P.
3-3. Using the Bluetooth® audio system ■ Bluetooth® audio system functions Depending on the portable player that is connected to the system, certain functions may not be available.
3-4. Using the hands-free phone system (for cellular phone) Making a phone call To enter the “PHONE” mode, press the off-hook switch.
3-4. Using the hands-free phone system (for cellular phone) Dialing by selecting a name STEP 1 Select “Phonebook” using STEP 2 Select the desired name using switch. By pressing . and press the off-hook (Add S. Dial) and one of the speed dial buttons (from to ) while the desired name is selected, it can be registered as a speed dial. 3 Speed dialing Select “Speed dials” using STEP 2 Press the desired preset button (from press the off-hook switch. By pressing . to ) and (Add S.
3-4. Using the hands-free phone system (for cellular phone) Dialing from call histories STEP 1 Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls” using STEP 2 . Select a desired number using switch. and press the off-hook The following operations can be performed: ● Registering a number as a speed dial Press (Add S. Dial) and then press and hold the desired preset button (from to ). ● Deleting the selected number Press (DELETE) and press (YES).
3-4. Using the hands-free phone system (for cellular phone) Operations during a call ● Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the following methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the operation of the phone. b. Press the *: * (PHONE).
3-4. Using the hands-free phone system (for cellular phone) Adjusting the ringtone volume when receiving a call Change the ringtone volume using To decrease the volume: Turn To increase the volume: Turn . counterclockwise. clockwise. ■ When talking on the phone ● Do not talk simultaneously with the other party. ● Keep the volume of the received voice down. Otherwise, voice echo will increase. ■ Automatic volume adjustment When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases.
3-4. Using the hands-free phone system (for cellular phone) Using the “SET UP” menu (“Bluetooth” menu) Registering a Bluetooth® device in the system allows the system to function. The following functions can be used for registered devices: ■ Functions and operation procedures STEP 1 Press STEP 2 Press using and select “Bluetooth” using . and select one of the following functions .
3-4. Using the hands-free phone system (for cellular phone) Registering a portable player Select “Pairing” using , and perform the procedure for registering a portable player. (→P. 256) Listing the registered cellular phones Select “List Phone” using phones will be displayed. . The list of registered cellular ● Connecting the registered cellular phone to the audio system STEP 1 Select the name of the cellular phone to be connected using STEP 2 . Select “Select” using .
3-4. Using the hands-free phone system (for cellular phone) Listing the registered portable players Select “List Audio” using ers will be displayed. . The list of registered portable play- ● Connecting the registered portable player to the audio system STEP 1 Select the name of the portable player to be connected using STEP 2 . Select “Select” using . 3 ● Deleting the registered portable player Select the name of the portable player to be deleted using .
3-4. Using the hands-free phone system (for cellular phone) Changing the passkey STEP 1 Select “Passkey” using . STEP 2 Select a 4 to 8-digit passkey using . Input the number 1 digit at a time. STEP 3 When the entire number to be registered as a passkey has been input, press again. If the passkey to be registered has 8 digits, pressing is not necessary.
3-4. Using the hands-free phone system (for cellular phone) Displaying the device status Select “Bluetooth info” using . ● Displaying the device name Select “Device Name” using . ● Displaying the device address Select “Device Address” using . 3 Setting the automatic connection confirmation display to on or off STEP 1 Select “Display Setting” using STEP 2 Select “ON” or “OFF” using . .
3-4. Using the hands-free phone system (for cellular phone) Initialization Select “Initialize” using . ● Initializing the sound settings Select “Sound setting” using and press (YES). For details about sound settings (→P. 242) ● Initializing the device information Select “Car Device Info” using and press (YES). Automatic connection of a portable device, automatic connection confirmation display and the passkey will be initialized.
3-4. Using the hands-free phone system (for cellular phone) Using the “SET UP” menu (“Phone” menu) ■ Functions and operation procedures To enter the menu of each function, press the steps below using and follow : ● Adding a new phone number 1. “Phone” → 2. “Phonebook” → 3. “Add contacts” ● Setting speed dials 1. “Phone” → 2. “Phonebook” → 3. “Add SD” ● Deleting call histories 1. “Phone” → 2. “Phonebook” → 3. “Delete Call History” 3 Interior features ● Deleting a registered phone number 1.
3-4. Using the hands-free phone system (for cellular phone) Adding a new phone number Select “Add contacts” using . ● Transferring all contacts from the cellular phone Select “Overwrite all contacts” using (YES). and press ● Transferring one contact from the cellular phone Select “Add one contact” using and press (YES). Setting speed dials STEP 1 Select “Add SD” using . STEP 2 Select the desired data using STEP 3 Press and hold the desired preset button (from . ).
3-4. Using the hands-free phone system (for cellular phone) Deleting call histories Select “Delete Call History” using . ● Deleting outgoing call history STEP 1 Select “Outgoing Calls” using . STEP 2 Select the desired phone number using and press (YES). To delete all outgoing call history data, press (YES). ● Deleting incoming call history STEP 1 Select “Incoming calls” using STEP 2 Select the desired phone number using . and press (YES).
3-4. Using the hands-free phone system (for cellular phone) ● Deleting missed call history STEP 1 Select “Missed Calls” using . STEP 2 Select the desired phone number using and press (YES). To delete all missed call history data, press press (ALL) and then (YES). ● Deleting a number from all call histories (Outgoing calls, Incoming calls and Missed calls) STEP 1 Select “All Calls” using . STEP 2 Select the desired phone number using and press (YES).
3-4. Using the hands-free phone system (for cellular phone) Deleting a registered phone number STEP 1 Select “Delete contacts” using . STEP 2 Select the desired phone number using and press (YES). To delete all of the registered phone numbers, select “All delete” using and press (YES). Deleting another cellular phone’s phonebook Select “Delete other PB” using . STEP 2 Select the desired phonebook using and press (YES).
3-4. Using the hands-free phone system (for cellular phone) Setting ringtone volume STEP 1 Select “Ringtone Volume” using STEP 2 Change the ringtone volume. . To decrease the volume: Turn counterclockwise. To increase the volume: Turn clockwise. Setting ringtone STEP 1 Select “Ringtone” using STEP 2 Using . , select a ringtone (1 - 3). To set the selected ringtone, press . Transferring call histories Select “Transfer Histories” using and press (YES).
3-5. Using the interior lights Interior lights list 3 Interior features Personal/interior lights or personal lights (→P. 281, 282) Interior lights (→P.
3-5. Using the interior lights Interior light ■ Illuminated entry system Vehicles with moon roof When the light switch is in the “DOOR” position, the interior lights and personal/interior lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked (with power door lock system) and whether the doors are open/closed.
3-5.
3-5.
3-6. Using the storage features List of storage features 3 Interior features Auxiliary boxes Glove box Bottle holders Cup holders Console box CAUTION ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ● Glasses may be deformed by heat or cracked if they come into contact with other stored items. ● Lighters or spray cans may explode.
3-6. Using the storage features Glove box and console box Glove box Pull up the lever. CAUTION ■ Caution while driving Keep the glove box closed. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by the open glove box or the items stored inside. Console box Lift the lid while pulling the lever. CAUTION ■ Caution while driving Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
3-6. Using the storage features Cup holders Cup holders Front Rear 3 Pull the lid to open. Interior features ■ Using the cup holder (front) to store small items Remove the cup holder inserts.
3-6. Using the storage features Cup holders ■ Adjusting the cup holder to the size of the cups or drink-cans Remove the cup holder insert and change the cup holder insert position. Small size Middle size Large size ■ Cup holder inserts (front) The cup holder inserts may be removed for cleaning. CAUTION ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders.
3-6. Using the storage features Bottle holders Bottle holders Front Rear 3 Interior features CAUTION ■ Items unsuitable for the bottle holder Do not place anything other than pet bottles in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
3-6. Using the storage features Bottle holders and auxiliary boxes NOTICE ■ When a pet bottle is in the front bottle holder (vehicles with manual window) As there is a possibility of interfering with a manual window regulator handle, prevent the window from opening and closing, do not place a pet bottle in the holder when turning the handle. Auxiliary boxes Front Pull up the lever. Overhead console (vehicles with moon roof) Push the lid.
3-6. Using the storage features Auxiliary boxes CAUTION ■ Caution while driving Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking. ■ Items unsuitable for storing (overhead console only) Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident.
3-7. Other interior features Sun visors Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.
3-7. Other interior features Vanity mirrors Slide the cover.
3-7. Other interior features Clock Adjusts the hour. Adjusts the minutes. Rounds hour.* to the nearest *: e.g. 1:00 to 1:29 → 1:00 1:30 to 1:59 → 2:00 ■ The clock is displayed when The engine switch is in the “ACC” or “ON” position.
3-7. Other interior features Ashtray∗ An ashtray can be installed in a cup holder. CAUTION 3 ■ When not in use ■ To prevent fire ● Fully extinguish matches and cigarettes before putting them in the ashtray, then make sure the ashtray is fully closed. ● Do not place paper or any other type of flammable object in the ashtray. ∗: If equipped 293 MATRIX_U Interior features Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.
3-7. Other interior features Cigarette lighter∗ Push the down. cigarette lighter The cigarette lighter will pop up when it is ready for use. ■ The cigarette lighter can be used when The engine switch is in the “ACC” or “ON” position. CAUTION ■ To avoid burns or fires ● Do not touch the metal parts of the cigarette lighter. ● Do not hold the cigarette lighter down. It could overheat and cause a fire. ● Do not insert anything other than the cigarette lighter into the outlet.
3-7. Other interior features Power outlet∗ The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 115 V: Accessories that uses less than 100 W. Type A (12 V) 3 Interior features Type B (115 V) ■ The power outlet can be used when 12 V The engine switch is in the “ACC” or “ON” position. 115 V The engine switch is in the “ON” position.
3-7. Other interior features NOTICE ■ To avoid damaging the power outlet Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short circuit. ■ To prevent the fuse from being blown 12 V Do not use an accessory that uses more than 12 V 10 A. 115 V Do not use a 115 V appliance that requires more than 100 W. If a 115 V appliance that consumes more than 100 W is used, the protection circuit will cut the power supply.
3-7. Other interior features Grocery bag hooks This hook is designed to hang things like grocery bag. Cabin Press the hook.
3-7. Other interior features NOTICE ■ Grocery bag hook weight capacity Cabin Do not hang any object heavier than 44 lb. (20 kg) on the grocery bag hook. Luggage compartment Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.
3-7. Other interior features Seatback table∗ Front passenger's seatback can be used as a temporary table only when the vehicle is stopped. Fold down the front passenger's seat to use the seatback table. (→P. 40) 3 CAUTION Interior features ■ Caution while driving Observe the following precautions to avoid death or serious injury. ● Do not set up the seatback table. ● Do not sit on or place anything on the seatback table.
3-7. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. CAUTION ■ Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat. NOTICE ■ To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip.
3-7. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Fix the floor mat in place using the retaining hooks (clips) provided. The shape of the retaining hooks (clips) and the fixing procedure of the floor mat for your vehicle may differ from those shown in the illustration. For details, refer to the floor mat retention clip installation instructions supplied with the clips.
3-7. Other interior features Luggage compartment feature ■ Cargo hooks Cargo hooks are provided for securing loose items.
3-7. Other interior features ■ Auxiliary boxes Turn the knobs to the “UNLOCK” position, and remove the deck boards.
3-7. Other interior features ■ Grocery bag hooks (→P. 297) ■ Tonneau cover (if equipped) STEP 1 Remove the deck board. STEP 2 Take out the bag. STEP 3 Remove the tonneau cover from the bag.
3-7. Other interior features STEP 4 Slowly unfold the tonneau cover. STEP 5 Attach the hook to the hook brackets. 3 Raise the rear center head restraint to attach the hook.
3-7. Other interior features Folding the tonneau cover STEP 1 Hold the tonneau cover with both hands. Point your thumbs in opposite directions. STEP 2 Bend one side of the cover towards you. STEP 3 Twist the other side in the opposite direction, as shown in the illustration.
3-7. Other interior features STEP 4 Make a small circle, then fold it inward. STEP 5 Make sure the three circles are side by side. 3 Interior features STEP 6 Put it in the bag.
3-7. Other interior features CAUTION ■ When unfolding the tonneau cover Be careful not to hit yourself when unfolding the tonneau cover. ■ Caution while driving Keep the deck boards locked. Injuries may result in the event of an accident or sudden braking.
3-7. Other interior features Compass∗ The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation To turn the compass on or off, press and hold “AUTO” for 3 seconds.
3-7. Other interior features Calibrating the compass The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in the illustration, the compass will deviate. To obtain higher precision or perfect calibration, refer to the following. ■ Deviation calibration STEP 1 STEP 2 Stop the vehicle. Press and hold “AUTO” for 6 seconds.
3-7. Other interior features ■ Circling calibration STEP 1 Stop the vehicle in a place where it is safe to drive in a circle. STEP 2 Press and hold “AUTO” for 9 seconds. C appears on the compass display. STEP 3 Drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. ■ Conditions unfavorable for correct operation The compass may not show the correct direction in the following situations: ● The vehicle is stopped immediately after turning.
3-7. Other interior features CAUTION ■ While driving the vehicle Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood. Do not violate any local traffic rules while performing circling calibration. NOTICE ■ To avoid compass malfunctions Do not place magnets or any metal objects near the anti-glare inside rear view mirror.
Maintenance and care 4-1. Maintenance and care Cleaning and protecting the vehicle exterior......... 314 Cleaning and protecting the vehicle interior.......... 317 4-2. Maintenance Maintenance requirements.................. 320 General maintenance....... 322 Emission inspection and maintenance (I/M) programs........................ 325 4 4-3. Do-it-yourself maintenance Do-it-yourself service precautions .................... Hood ................................ Positioning a floor jack .....
4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water.
4-1. Maintenance and care ■ Aluminum wheels ● Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. ● Do not use detergent on the wheels when they are hot, for example after driving for long distance in the hot weather. ● Wash detergent from the wheels immediately after use. ■ Bumpers Do not scrub with abrasive cleaners.
4-1. Maintenance and care NOTICE ■ To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.
4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle's interior and keep it in top condition: ■ Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. ■ Cleaning the leather areas ● Remove dirt and dust using a vacuum cleaner. ● Wipe any excess dirt and dust with a soft cloth dampened with diluted detergent.
4-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. Excellent results are obtained by keeping the carpet as dry as possible. ■ Seat belts Clean with mild soap and lukewarm water using a cloth or sponge.
4-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. ● Do not use polish wax or polish cleaner. The instrument panel's or other interior part's painted surface may be damaged.
4-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance is essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance. ■ General maintenance Should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. ■ Scheduled maintenance Should be performed at specified intervals according to the maintenance schedule.
4-2. Maintenance ■ Reset the maintenance data (U.S.A. only) After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data. To reset the data, follow the procedures described below: STEP 1 Turn the engine switch OFF with the trip meter A reading shown. STEP 2 While pressing the trip meter reset button (→P. 132), turn the engine switch to the “ON” position. STEP 3 Continue to press and hold the button until the trip meter displays 000000.
4-2. Maintenance General maintenance Listed below are the general maintenance items that should be performed at the intervals specified in the “Owner's Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Battery Check the connections. (→P. 345) Brake fluid At the correct level? (→P.
4-2.
4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? Fluid leaks • Is there any leakage after parking? Tires • Inflation pressure is correct? • Tire surfaces not worn or damaged? • Tires rotated according to the maintenance schedule? • Wheel nuts are not loose? Windshield wipers/rear window wiper • The wiper blades should not show any signs of cracking, splitting, wear, contamination or deformation.
4-2. Maintenance Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. ■ If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
4-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance yourself, be sure to follow the correct procedures as given in these sections. Items Battery condition Brake fluid level Engine coolant level Engine oil level 326 MATRIX_U Parts and tools (→P. 345) • Warm water • Baking soda • Grease • Conventional wrench (for terminal clamp bolts) (→P. 343) • FMVSS No.
4-3. Do-it-yourself maintenance Items Fuses Parts and tools (→P. 369) Radiator and condenser (→P. 342) • Fuse with same amperage rating as original Tire inflation pressure (→P. 358) • Tire pressure gauge • Compressed air source Washer fluid • Water washer fluid containing antifreeze (for winter use) • Funnel (→P.
4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing, and tools away from the moving fan and engine drive belt. ● Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driving as they may be hot. Oil and other fluids may also be hot.
4-3. Do-it-yourself maintenance NOTICE ■ If you remove the air cleaner Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air.
4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. STEP 1 Pull the hood release lever. The hood will pop up slightly. STEP 2 Lift the auxiliary catch lever and lift the hood. STEP 3 Hold the hood open by inserting the supporting rod into the slot.
4-3. Do-it-yourself maintenance CAUTION ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■ After installing the support rod into the slot Make sure the rod supports the hood securely from falling down on to your head or body. NOTICE ■ When closing the hood Be sure to return the support rod to its clip before closing the hood.
4-3. Do-it-yourself maintenance Positioning a floor jack When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury. ■ Front 1.8 L 4-cylinder (2ZR-FE) engine 2.
4-3.
4-3. Do-it-yourself maintenance CAUTION ■ When raising your vehicle Make sure to observe the following to reduce the possibility of death or serious injury. ● Lift up the vehicle using a floor jack such as the one shown in the illustration. ● When using a floor jack, follow the instructions of the manual provided with the jack. ● Do not use the jack that was supplied with your vehicle. ● Do not put any part of your body or get underneath the vehicle supported only by the floor jack.
4-3. Do-it-yourself maintenance Engine compartment 1.8 L 4-cylinder (2ZR-FE) engine 4 Battery (→P. 345) Radiator (→P. 342) Engine oil level dipstick (→P. 337) Electric cooling fan Brake fluid reservoir (→P. 343) Engine coolant reservoir (→P. 341) Fuse box (→P. 369) Condenser Maintenance and care Engine oil filler cap (→P. 339) (→P. 342) Washer fluid tank (→P.
4-3. Do-it-yourself maintenance 2.4 L 4-cylinder (2AZ-FE) engine Engine coolant reservoir (→P. 341) Fuse box (→P. 369) Battery (→P. 345) Engine oil filler cap (→P. 339) Radiator (→P. 342) Engine oil level dipstick (→P. 337) Condenser Brake fluid reservoir (→P. 343) 336 MATRIX_U Electric cooling fans (→P. 342) Washer fluid tank (→P.
4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil STEP 1 Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine. STEP 2 Hold a rag under the end and pull the dipstick out. 4 STEP 3 Wipe the dipstick clean. STEP 4 Reinsert the dipstick fully. 1.
4-3. Do-it-yourself maintenance Flat dipstick type Low Normal Excessive The shape of the dipstick may differ depending on the type of vehicle or engine. Non-flat dipstick Low Normal Excessive The shape of the dipstick may differ depending on the type of vehicle or engine. STEP 6 338 MATRIX_U Wipe the dipstick and reinsert it fully.
4-3. Do-it-yourself maintenance ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil. Engine oil selection →P. 443 Oil quantity (Low → Full) 1.8 L 4-cylinder (2ZR-FE) engine 1.6 qt. (1.5 L, 1.3 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 1.1 qt. (1.0 L, 0.9 Imp. qt.) Items Clean funnel Remove the oil filler cap.
4-3. Do-it-yourself maintenance ● 1.8L 4-cylinder (2ZR-FE) engine: When driving at high engine speeds or with a heavy load, or when driving while accelerating or decelerating frequently ● When leaving the engine idling for a long time, or when driving frequently through heavy traffic CAUTION ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation or skin cancer, so care should be taken to avoid prolonged and repeated contact.
4-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir cap “FULL” “LOW” If the level is on or below the “LOW” line, add coolant up to the “FULL” line. (→P.
4-3. Do-it-yourself maintenance NOTICE ■ When adding engine coolant Coolant is neither plain water nor straight antifreeze. The correct mixture of water and antifreeze must be used to provide proper lubrication, corrosion protection and cooling. Be sure to read the antifreeze or coolant label. ■ If you spill coolant Be sure to wash it off with water to prevent damage to parts or paint. Radiator and condenser Check the radiator and condenser and remove any foreign objects.
4-3. Do-it-yourself maintenance Brake fluid ■ Checking fluid level The brake fluid level should be between the “MAX” and “MIN” lines on the tank. Make sure to check the fluid type and prepare the necessary items. ■ Adding fluid Make sure to check the fluid type and prepare the necessary items. Fluid type Items Clean funnel Slide and lift up the rubber strip to partly remove it as shown. 343 MATRIX_U Maintenance and care STEP 1 4 FMVSS No.
4-3. Do-it-yourself maintenance STEP 2 Disconnect the claws remove the service cover. STEP 3 Remove the reservoir cap. STEP 4 and Add brake fluid slowly while checking the fluid level. ■ Brake fluid can absorb moisture from the air Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. CAUTION ■ When filling the reservoir Take care because brake fluid can harm your hands or eyes and damage painted surfaces.
4-3. Do-it-yourself maintenance NOTICE ■ If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem. Battery Check the battery as follows. ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps.
4-3. Do-it-yourself maintenance CAUTION ■ Chemicals in the battery A battery contains poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near the battery: ● Do not cause sparks by touching the battery terminals with tools. ● Do not smoke or light a match near the battery. ● Avoid contact with eyes, skin and clothes. ● Never inhale or swallow electrolyte.
4-3. Do-it-yourself maintenance NOTICE ■ When recharging the battery Never recharge the battery while the engine is running. Also, be sure all accessories are turned off. Washer fluid For vehicles sold in U.S.A. If any washer does not work, the washer tank may be empty. STEP 1 Open the lid. 4 Maintenance and care STEP 2 Add washer fluid. For vehicles sold in Canada If any washer does not work or the low windshield washer fluid level warning light comes on, the washer tank may be empty.
4-3. Do-it-yourself maintenance CAUTION ■ When refilling the washer fluid Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE ■ Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces. ■ Diluting washer fluid Dilute washer fluid with water as necessary.
4-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance schedules and treadwear. ■ Checking tires New tread Treadwear indicator Worn tread The location of treadwear indicators is shown by the “TWI” or “ ” marks, etc., molded on the sidewall of each tire. Check spare tire condition and inflation pressure if not rotated.
4-3. Do-it-yourself maintenance Installing tire pressure warning valves and transmitters When replacing tires or wheels, tire pressure warning valves and transmitters must also be installed. When new tire pressure warning valves and transmitters are installed, new tire pressure warning valve and transmitter ID codes must be registered in the tire pressure warning computer and the tire pressure warning system must be initialized.
4-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system STEP 1 Park the vehicle in a safe place and turn the engine switch OFF. While the vehicle is moving, initialization is not performed. STEP 2 Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (→P. 451) Make sure to adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning system will operate based on this pressure level.
4-3. Do-it-yourself maintenance Registering ID codes The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code of tire pressure warning valve and transmitter. Have the ID code registered by your Toyota dealer.
4-3. Do-it-yourself maintenance ■ When the initialization of the tire pressure warning system has failed Initialization can be completed in a few minutes. However, in the following cases, the settings have not been recorded and the system will not operate properly. If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer.
4-3. Do-it-yourself maintenance ■ Tire types 1 Summer tires Summer tires are high-speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads. For driving on snow-covered roads or icy roads, the use of snow tires is recommended. When installing snow tires, be sure to replace all four tires.
4-3. Do-it-yourself maintenance ■ Tire pressure warning system certification FCC ID: PAXPMV107J FCC ID: HYQ13BCX For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4-3. Do-it-yourself maintenance CAUTION ■ When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train, as well as dangerous handling characteristics, which may lead to an accident resulting in death or serious injury. ● Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. ● Do not use tire sizes other than those recommended by Toyota.
4-3. Do-it-yourself maintenance NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves, transmitters and tire valve caps ● When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact your Toyota dealer as the tire pressure warning valves and transmitters may be damaged if not handled correctly. ● When replacing tire valve caps, do not use tire valve caps other than those specified. The cap may become stuck.
4-3. Do-it-yourself maintenance Tire inflation pressure ■ Tire inflation pressure The recommended cold tire inflation pressure and tire size is displayed on the tire and loading information label. (→P.
4-3. Do-it-yourself maintenance ■ Inspection and adjustment procedure Tire valve Tire pressure gauge STEP 1 Remove the tire valve cap. STEP 2 Press the tip of the tire pressure gauge onto the tire valve. STEP 3 Read the pressure using the graduations of the gauge. STEP 4 If the tire inflation pressure is not at the recommended level adjust the pressure. If you add too much air, press the center of the valve to lower.
4-3. Do-it-yourself maintenance ■ Effects of incorrect tire inflation pressure Driving with incorrect tire inflation pressure may result in the following: ● Reduced fuel efficiency ● Reduced driving comfort and tire life ● Reduced safety ● Damage to the drive train If a tire needs frequent refilling, have it checked by your Toyota dealer. ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold.
4-3. Do-it-yourself maintenance CAUTION ■ Proper inflation is critical to save tire performance Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury.
4-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause loss of handling control. ■ Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width, and inset*. Replacement wheels are available at your Toyota dealer. *: Conventionally referred to as “offset”.
4-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your Toyota, except for the compact spare tire, are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, the tire pressure warning valves and transmitters must be installed. (→P.
4-3. Do-it-yourself maintenance NOTICE ■ Replacing tire pressure warning valves and transmitters ● Because tire repair or replacement may affect the tire pressure warn- ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer. ● Ensure that only genuine Toyota wheels are used on your vehicle.
4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. ■ Removal method STEP 1 Turn the engine switch OFF. STEP 2 Open the glove box. Slide off the damper. STEP 3 Push in each side of the glove box to disconnect the claws. 4 Maintenance and care STEP 4 Remove the filter cover.
4-3. Do-it-yourself maintenance ■ Replacement method Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. ■ Checking interval Replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.
4-3. Do-it-yourself maintenance Key battery (vehicles with wireless remote control) Replace the battery with a new one if it is discharged. ■ You will need the following items: ● Flathead screwdriver (To prevent damage to the key, cover the tip of the screwdriver with a rag.) ● Lithium battery CR2025 ■ Replacing the battery STEP 1 Remove the cover. STEP 2 Remove the module. STEP 3 Open the case cover using a flathead screwdriver protected with tape etc. and remove the depleted battery.
4-3. Do-it-yourself maintenance ■ If the key battery is discharged The following symptoms may occur. ● The wireless remote control will not function properly. ● The operational range is reduced. ■ Use CR2025 lithium battery ● Batteries can be purchased at your Toyota dealer, jewelers, or camera stores. ● Replace only with the same or equivalent type recommended by your Toyota dealer. ● Dispose of used batteries according to the local laws.
4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. STEP 1 Turn the engine switch OFF. STEP 2 Open the fuse box cover. Engine compartment Push the tab in and lift the lid off. Under the driver’s side instrument panel 4 Remove the lid. After a system failure, see “Fuse layout and amperage ratings” (→P. 372) for details about which fuse to check.
4-3. Do-it-yourself maintenance Take out the pullout tool. STEP 4 Only type A fuse can be removed using the pullout tool. STEP 5 For type A and B fuses: Remove the fuse. STEP 6 Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid.
4-3. Do-it-yourself maintenance Type C Normal fuse Blown fuse Contact your Toyota dealer. Type D Normal fuse Blown fuse Contact your Toyota dealer.
4-3. Do-it-yourself maintenance Fuse layout and amperage ratings ■ Engine compartment Fuse Ampere Circuit 1 CDS FAN 30 A Electric cooling fan(s) 2 RDI FAN 40 A Electric cooling fan(s) 3 ABS NO. 3 30 A Anti-lock brake system, vehicle stability control system 4 ABS NO. 1 50 A Anti-lock brake system, vehicle stability control system 5 HTR 50 A Air conditioning system 120 A Charging system, RDI FAN, CDS FAN, ABS NO. 1, ABS NO. 3, PWR OUTLET/INVERTER, HTR, HTR SUB NO. 1, HTR SUB NO.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit EPS 60 A Electric power steering 8 P/I 50 A EFI MAIN, HORN, IG2 9 H-LP MAIN 50 A H-LP LH LO, H-LP RH LO, H-LP LH HI, H-LP RH HI 10 EFI NO. 2 10 A Emission control system 11 EFI NO.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 26 DOME 10 A Interior lights, personal light, clock, wireless remote control 27 SPARE 10 A Spare fuse 28 SPARE 30 A Spare fuse 29 SPARE 20 A Spare fuse 30 AMP 30 A No circuit 31 MAYDAY 10 A No circuit 32 EFI MAIN 20 A Multiport fuel injection system/ sequential multiport fuel injection system, EFI NO. 1, EFI NO.
4-3. Do-it-yourself maintenance ■ Under the driver’s side instrument panel Fuse Ampere Circuit TAIL 10 A 2 PANEL 7.5 A Switch illumination 3 FR DOOR 20 A Power windows, electric moon roof 4 RL DOOR 20 A Power windows 5 RR DOOR 20 A Power windows 6 SUNROOF 20 A Electric moon roof 7 CIG 15 A Cigarette lighter, power outlet 8 ACC 7.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 11 IGN 7.5 A SRS airbag system, multiport fuel injection system/sequential multiport fuel injection system, front passenger occupant classification system 12 METER 7.5 A Gauge and meters 13 HTR-IG 10 A Air conditioning system, rear window defogger, PTC heater 14 WIPER 25 A Windshield wipers 15 RR WIPER 15 A Rear window wiper 16 WASHER 15 A Windshield washer 17 ECU-IG NO.
4-3. Do-it-yourself maintenance Fuse Ampere Circuit 24 FR FOG 15 A Front fog lights 25 AM1 7.5 A Starting system, shift lock control system 26 DEF 30 A Rear window defogger, MIR HTR 27 POWER 30 A Power windows ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulb may need replacing. (→P. 378) ● If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.
4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. ■ Prepare a replacement light bulb. Check the wattage of the light bulb being replaced. (→P.
4-3.
4-3. Do-it-yourself maintenance Replacing light bulbs ■ Headlight low beams STEP 1 Turn the bulb base counterclockwise. STEP 2 Unplug the bulb while depressing the lock release. ■ Headlight high beams and daytime running lights STEP 1 380 MATRIX_U Turn the bulb base counterclockwise.
4-3. Do-it-yourself maintenance STEP 2 Unplug the bulb while depressing the lock release. ■ Front fog lights (if equipped) STEP 1 Remove the fender liner bolts and clip. 4 Partly remove the fender liner. STEP 3 Turn the bulb base counterclockwise.
4-3. Do-it-yourself maintenance STEP 4 Unplug the bulb while depressing the lock release. ■ Front turn signal/parking and front side marker lights STEP 1 Turn the bulb base counterclockwise. STEP 2 Remove the light bulb.
4-3. Do-it-yourself maintenance ■ Stop/tail and rear side marker lights, rear turn signal lights and back-up lights STEP 1 Open the back door. Left side STEP 2 Remove the cover. Right side (type A) STEP 2 Remove the cover using the flathead screwdriver. Right side (type B) STEP 2 Remove the cover. 383 MATRIX_U 4 Maintenance and care To protect the cover, place a rag between the flathead screwdriver and the cover.
4-3. Do-it-yourself maintenance STEP 3 Turn the bulb base counterclockwise. Rear turn signal light Back-up light Stop/tail and rear side marker light STEP 4 Remove the light bulb.
4-3. Do-it-yourself maintenance ■ License plate lights STEP 1 Open the back door and remove the cover. To protect the cover, place a rag between the flathead screwdriver and the cover, as shown in the illustration. STEP 2 Turn the bulb base counterclockwise. 4 Remove the light bulb. Maintenance and care STEP 3 ■ LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
4-3. Do-it-yourself maintenance ■ Condensation build-up on the inside of the lens Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. Contact your Toyota dealer for more information in the following situations: ● Large drops of water are built up on the inside of the lens. ● Water has built up inside the headlight. ■ Removing and installing the fender liner clip Removing Installing CAUTION ■ Replacing light bulbs ● Turn off the headlights.
When trouble arises 5-1. Essential information Emergency flashers ......... If your vehicle needs to be towed ........................ If you think something is wrong ............................. Fuel pump shut off system ........................... 388 389 395 396 5 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... ....................... If you have a flat tire......... If the engine will not start ................................
5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE ■ To prevent battery discharge Do not leave the emergency flashers on longer than necessary when the engine is not running.
5-1. Essential information If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/provincial and local laws. 2WD models: If towing your vehicle with a wheel-lift type truck from the front, the vehicle's rear wheels and axles must be in good conditions. (→P.
5-1. Essential information Emergency towing If a tow truck is not available, in an emergency your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for short distances at low speeds. A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition. 1.8 L 4-cylinder (2ZR-FE) engine Towing eyelet 2.
5-1. Essential information Towing with a sling-type truck Do not tow with a sling-type truck to prevent body damage. Towing with a wheel-lift type truck From the front (2WD models) Release the parking brake. 5 Use a towing dolly under the rear wheels.
5-1. Essential information From the rear Automatic transmission: Use a towing dolly under the front wheels. Manual transmission: We recommend to use a towing dolly under the front wheels. When not using a towing dolly, turn the engine switch to the “ACC” position and shift the shift lever to N. Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.
5-1. Essential information CAUTION ■ Caution while towing ● Use extreme caution when towing the vehicle. Avoid sudden starts or erratic driving maneuvers which place excessive stress on the emergency towing eyelet and the cables or chains. Always be cautious of the surroundings and other vehicles while towing. ● If the engine is not running, the power assist for the brakes and steering will not function, making steering and braking more difficult.
5-1. Essential information NOTICE ■ To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear. ■ To prevent causing serious damage to the transmission and Active Torque Control 4WD system (AWD models) when towing using a wheel-lift type truck (vehicles with an automatic transmission) 2WD models: Never tow this vehicle from the rear with the front wheels on the ground. This may cause serious damage to the transmission.
5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. ■ Visible symptoms ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.
5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an airbag inflates upon collision, the fuel pump shut off system stops supplying fuel to the engine. Follow the procedure below to restart the engine after the system is activated. STEP 1 Turn the engine switch to the “ACC” or “LOCK” position. STEP 2 Restart the engine. NOTICE ■ Before starting the engine Inspect the ground under the vehicle.
5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake system.
5-2. Steps to take in an emergency Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging system. Low engine oil pressure warning light Indicates that the engine oil pressure is too low. Have the vehicle inspected immediately.
5-2. Steps to take in an emergency Warning light (U.S.A.) Warning light/Details ABS warning light Indicates a malfunction in: • ABS; or • The brake assist system. (Canada) Electric power steering system warning light (warning buzzer) Indicates a malfunction in the EPS system. Slip indicator light Indicates a malfunction in: • The VSC system; or • The TRAC system. (Flashes) (AWD models) Cruise control indicator light (if equipped) Indicates a malfunction in the cruise control system.
5-2. Steps to take in an emergency CAUTION ■ When the electric power steering warning light comes on The steering wheel may become extremely heavy. If the steering wheel becomes heavier than usual when operating, firmly hold and operate it using more force than usual. Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off.
5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Tire pressure warning light (if equipped) When the light comes on: Low tire inflation pressure such as • Natural causes (→P. 403) • Flat tire (→P. 408) Adjust the tire inflation pressure to the specified level. The light will turn off after a few minutes. In case the light does not turn off even if the tire inflation pressure is adjusted, have the system checked by your Toyota dealer.
5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Maintenance required reminder light Indicates that maintenance is required according to the driven distance on the maintenance schedule.*3 (U.S.A.) Illuminates for about 3 seconds and then flashes for about 15 seconds approximately 4500 miles (7200 km) after the maintenance data has been reset. If necessary, perform maintenance.
5-2.
5-2. Steps to take in an emergency ■ If the tire pressure warning system is inoperative The tire pressure warning system will be disabled in the following conditions: (When the condition becomes normal, the system will work properly.) ● If tires not equipped with tire pressure warning valves and transmit- ters are used. ● If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. ● If the tire inflation pressure is 73 psi (500 kPa, 5.
5-2. Steps to take in an emergency CAUTION ■ If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so could cause loss of vehicle control and result in death or serious injury. ● Stop your vehicle in a safe place as soon as possible. Adjust the tire inflation pressure immediately. ● If the tire pressure warning light comes on even after tire inflation pres- sure adjustment, it is probable that you have a flat tire. Check the tires.
5-2. Steps to take in an emergency CAUTION As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.
5-2. Steps to take in an emergency NOTICE ■ Precaution when installing a different tire When a tire of a different specification or maker is installed, the tire pressure warning system may not operate properly.
5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. ■ Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake. ● Shift the shift lever to P (automatic transmission) or R (manual transmission). ● Stop the engine. ● Turn on the emergency flashers.
5-2. Steps to take in an emergency Taking out the jack STEP 1 Turn the knobs to the “UNLOCK” position and remove the deck board. STEP 2 Detach the hook.
5-2. Steps to take in an emergency Taking out the spare tire STEP 1 Turn the knobs to the “UNLOCK” position and remove the deck boards. STEP 2 Loosen the center fastener that secures the spare tire.
5-2. Steps to take in an emergency Replacing a flat tire STEP 1 Chock the tires. Flat tire Lefthand side Behind the rear righthand side tire Righthand side Behind the rear lefthand side tire Lefthand side In front of the front right-hand side tire Righthand side In front of the front left-hand side tire Front Rear 5 Vehicles with a steel wheel, remove the wheel ornament using the wrench.
5-2. Steps to take in an emergency STEP 3 Slightly loosen the wheel nuts (one turn). STEP 4 Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indicate the jack point positions.
5-2. Steps to take in an emergency STEP 5 Raise the vehicle until the tire is slightly raised off the ground. STEP 6 Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign matter from the wheel contact surface. STEP 1 If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle. STEP 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.
5-2. Steps to take in an emergency STEP 3 Lower the vehicle. STEP 4 Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP 5 Stow the flat tire, tire jack and all tools. Stowing the flat tire 5 STEP 1 415 MATRIX_U When trouble arises Vehicles with aluminum wheel: Before stowing the flat tire, remove the center wheel ornament by pushing from the reveres side.
5-2. Steps to take in an emergency STEP 2 Put the flat tire on the deck boards with the outer side of the wheel facing up. Hook the belt clips closest to the buckles onto the front cargo hooks. STEP 3 Pass the belts through the center hole of the wheel. STEP 4 Hook the other side of the clips of the belts to the rear hooks. STEP 5 Position the tire edge against the rear center end of the luggage compartment.
5-2. Steps to take in an emergency Pull the ends of the belts to secure the tire. STEP 6 ■ The compact spare tire ● The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. ● Make sure to check the tire pressure of the compact spare tire. (→P. 451) ■ If you have a flat front tire on a road covered with snow or ice Install the compact spare tire on the rear of the vehicle.
5-2. Steps to take in an emergency CAUTION ■ Using the tire jack Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● Only use the tire jack that comes with this vehicle for replacing a flat tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle.
5-2. Steps to take in an emergency CAUTION ■ Replacing a flat tire ● Do not attach a heavily damaged wheel ornament, as it may fly off the wheel while the vehicle is moving and possibly result in serious injury. ● Failure to follow these precautions could cause the wheel nuts to loosen and the tire to fall off, resulting in death or serious injury. • Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103 N•m, 10.5 kgf•m) as soon as possible after changing wheels.
5-2. Steps to take in an emergency CAUTION ■ When the spare tire is attached The vehicle speed may not be correctly detected, and the following systems may not operate correctly: ● ABS & Brake assist ● VSC ● TRAC Also, not only can the following system not be utilized fully, it may actually negatively effect the drive-train components: ● Active Torque Control 4WD system (if equipped) ■ When stowing the flat tire ● Make sure the rear seats are in their original position.
5-2. Steps to take in an emergency NOTICE ■ When replacing the tires When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. ■ To avoid damage to the tire pressure warning valves and transmit- ters When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly.
5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 118) or releasing the steering lock (→P. 120), confirm the following points. ■ The engine will not start even when the starter motor operates normally. One of the following may be the cause of the problem. ● There may not be sufficient fuel in the vehicle’s tank. Refuel the vehicle. ● The engine may be flooded.
5-2. Steps to take in an emergency If the shift lever cannot be shifted from P (automatic transmission) If the shift lever cannot be shifted with your foot on the brake, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted. STEP 1 Set the parking brake.
5-2. Steps to take in an emergency If you lose your keys New genuine keys can be made by your Toyota dealer. Bring a master key and the key number stamped on the key number plate.
5-2. Steps to take in an emergency If the battery is discharged The following procedures may be used to start the engine if the vehicle's battery is discharged. You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your Toyota following the steps below. 1.8 L 4-cylinder (2ZR-FE) engine STEP 1 5 Remove the engine cover.
5-2. Steps to take in an emergency Connect the jumper cable to ground on your vehicle as shown in the illustration. STEP 3 Start the engine of the second vehicle. Increase the engine speed slightly and maintain at that level for approximately 5 minutes to recharge the battery of your vehicle. STEP 4 Maintain the engine speed of the second vehicle, and turn the engine switch to the “ON” position then start the vehicle's engine.
5-2. Steps to take in an emergency 2.4 L 4-cylinder (2AZ-FE) engine STEP 1 Connecting the jumper cables Positive (+) battery terminal on your vehicle Positive (+) battery terminal on the second vehicle Negative (-) battery terminal on the second vehicle Connect the jumper cable to ground on your vehicle as shown in the illustration. Start the engine of the second vehicle. Increase the engine speed slightly and maintain at that level for approximately 5 minutes to recharge the battery of your vehicle.
5-2. Steps to take in an emergency ■ Avoiding a discharged battery ● Turn off the headlights and the audio system while the engine is turned off. ● Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic, etc. ■ Charging the battery The electricity stored in the battery will discharge gradually even when the vehicle is not in use, due to natural discharge and the draining effects of certain electrical appliances.
5-2. Steps to take in an emergency CAUTION ■ Battery precautions The battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead compounds. Observe the following precautions when handling the battery. ● When working with the battery, always wear safety glasses and take care not to allow any battery fluids (acid) to come into contact with skin, clothing or the vehicle body. ● Do not lean over the battery.
5-2. Steps to take in an emergency If your vehicle overheats The following may indicate that your vehicle is overheating. ● The needle of the engine coolant temperature gauge (→P. 132) enters the red zone or a loss of engine power is experienced. (For example, the vehicle speed does not increase.) ● Steam comes out from under the hood Correction procedures STEP 1 Stop the vehicle in a safe place and turn off the air conditioning system, and then stop the engine.
5-2. Steps to take in an emergency Add coolant if necessary. STEP 5 Water can be used in an emergency if coolant is unavailable. STEP 6 Start the engine and turn the air conditioning system on to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. The fan operates when the air conditioning system is turned on immediately after a cold start. Confirm that the fan is operating by checking the fan sound and air flow.
5-2. Steps to take in an emergency CAUTION ■ To prevent an accident or injury when inspecting under the hood of your vehicle ● If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot, causing serious injury such as burns. ● Keep hands and clothing (especially a tie, a scarf or a muffler) away from the fan and belts. Failure to do so may cause the hands or clothing to be caught, resulting in serious injury.
5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. STEP 1 Stop the engine. Set the parking brake and put the shift lever in P (automatic transmission) or N (manual transmission). STEP 2 Remove the mud, snow, or sand from around the stuck tire. STEP 3 Place wood, stones or some other material to help provide traction under the tires. STEP 4 Restart the engine.
5-2. Steps to take in an emergency NOTICE ■ To avoid damaging the transmission and other components ● Avoid spinning the wheels and do not rev the engine. ● If the vehicle remains stuck after trying these procedures, the vehicle may require towing to be freed.
5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: STEP 1 Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle. STEP 2 Shift the shift lever to N.
5-2. Steps to take in an emergency CAUTION ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine. ● Never attempt to remove the key, as doing so will lock the steering wheel.
Vehicle specifications 6 6-1. Specifications Maintenance data (fuel, oil level, etc.)......... 438 Fuel information ............... 454 Tire information ................ 457 6-2. Customization Customizable features ..... 469 6-3. Initialization Items to initialize ..............
6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights 171.9 in. (4365 mm)*1 Overall length 173.0 in. (4395 mm)*2 Overall width 69.5 in. (1765 mm) 61.0 in. (1550 mm)*4 Overall height*3 61.4 in. (1560 mm)*5 Wheelbase Tread 102.4 in. (2600 mm) Front 59.8 in. (1519 mm) Rear 59.9 in. (1522 mm) Vehicle capacity weight (Occupants + luggage) 850 lb. (385 kg) Trailer weight rating*6 (Trailer weight + cargo weight) 1500 lb.
6-1. Specifications Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel. This number is also on the Certification Label on the driver’s side center pillar.
6-1. Specifications ■ Engine number The engine number is stamped on the engine block as shown. 1.8 L 4-cylinder (2ZR-FE) engine 2.
6-1. Specifications Engine 1.8 L 4-cylinder (2ZR-FE) engine Model 2ZR-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.17 × 3.48 in. (80.5 × 88.3 mm) Displacement 109.7 cu.in. (1798 cm3) Drive belt tension* 143 ± 22 lbf (650 ± 100 N, 65 ± 10 kgf) Valve clearance (engine cold) Intake Exhaust Automatic adjustment *: Drive belt tension measured with Borroughs drive belt tension gauge No. BT33-73F (used belt), lb.
6-1. Specifications 2.4 L 4-cylinder (2AZ-FE) engine Model 2AZ-FE engine Type 4 cylinder in line, 4 cycle, gasoline Bore and stroke 3.48 × 3.78 in. (88.5 × 96.0 mm) Displacement 144.1 cu.in. (2362 cm3) Drive belt tension Automatic adjustment Valve clearance (engine cold) Intake Exhaust 0.007 0.011 in. (0.19 0.29 mm) 0.015 0.019 in. (0.38 0.48 mm) Fuel Fuel type Unleaded gasoline only Octane rating 87 (Research Octane Number 91) or higher Fuel tank capacity (Reference) 13.2 gal.
6-1. Specifications Lubrication system Oil capacity (Drain and refill reference) With filter Without filter 1.8 L 4-cylinder (2ZR-FE) engine 4.4 qt. (4.2 L, 3.7 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 4.0 qt. (3.8 L, 3.3 Imp. qt.) 1.8 L 4-cylinder (2ZR-FE) engine 4.1 qt. (3.9 L, 3.4 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 3.8 qt. (3.6 L, 3.2 Imp. qt.) ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle.
6-1. Specifications Oil viscosity (0W-20 is explained here as an example): ● The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. ● The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature.
6-1. Specifications How to read oil container label: The ILSAC (International Lubricant Standardization and Approval Committee) Certification Mark is added to some oil containers to help you select the oil you should use. Cooling system Capacity (Reference) Coolant type 1.8 L 4-cylinder (2ZR-FE) engine 5.8 qt. (5.5 L, 4.8 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 6.0 qt. (5.7 L, 5.0 Imp. qt.) Use either of the following.
6-1. Specifications Ignition system Spark plug Make Gap 1.8 L 4-cylinder (2ZR-FE) engine DENSO SC20HR11 2.4 L 4-cylinder (2AZ-FE) engine DENSO SK20R11 DENSO SK16R11 NGK IFR6A11 NGK IFR5A11 0.043 in. (1.1 mm) NOTICE ■ Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust spark plug gap. Electrical system Battery Open voltage at 68°F (20°C): 12.6 12.8 V Fully charged 12.2 12.4 V Half charged 11.8 12.
6-1. Specifications Manual transmission Gear oil capacity (Reference) Gear oil type 1.8 L 4-cylinder (2ZR-FE) engine 2.0 qt. (1.9 L, 1.7 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine 2.6 qt. (2.5 L, 2.2 Imp. qt.
6-1. Specifications Automatic transmission Fluid capacity (Reference) Fluid type 1.8 L 4-cylinder (2ZR-FE) engine 6.9 qt. (6.5 L, 5.7 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine (2WD models) 8.2 qt. (7.8 L, 6.9 Imp. qt.) 2.4 L 4-cylinder (2AZ-FE) engine (AWD models) 8.6 qt. (8.1 L, 7.1 Imp. qt.
6-1. Specifications Rear differential (AWD models) Oil capacity 0.5 qt. (0.5 L, 0.4 Imp. qt.) Oil type Hypoid gear oil API GL-5 Recommended oil viscosity Above 0°F (-18°C): SAE 90 Below 0°F (-18°C): SAE 80W or 80W-90 Transfer (AWD models) Oil capacity 0.8 qt. (0.8 L, 0.7 Imp. qt.) Oil type Hypoid gear oil API GL-5 Recommended oil viscosity Above 0°F (-18°C): SAE 90 Below 0°F (-18°C): SAE 80W or 80W-90 Clutch Pedal free play 0.2 0.6 in. (5 15 mm) Fluid type SAE J1703 or FMVSS No.
6-1. Specifications Brakes Pedal clearance*1 1.8 L 4-cylinder (2ZR-FE) engine 3.4 in. (87 mm) 2.4 L 4-cylinder (2AZ-FE) engine • AWD models: 3.4 in. (87 mm) • 2WD models with P215/45R18 tires: 3.4 in. (87 mm) • 2WD models with tires other than the above: 3.3 in. (85 mm) Pedal free play 0.04 0.24 in. (1 6 mm) Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit*2 0.04 in. (1.0 mm) Parking brake lever travel*3 6 9 clicks Fluid type SAE J1703 or FMVSS No.
6-1. Specifications Steering Free play Less than 1.2 in. (30 mm) Tires and wheels 16-inch tires Tire size Tire inflation pressure (Recommended cold tire inflation pressure) P205/55R16 89H, T135/80R16 101M or T135/70R17 102M 2WD models Front: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm2 or bar) AWD models Front: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Spare: 60 psi (420 kPa, 4.
6-1. Specifications 17-inch tires Tire size Tire inflation pressure (Recommended cold tire inflation pressure) P215/45R17 87W, T135/80R16 101M or T135/70R17 102M 2WD models Front: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Spare: 60 psi (420 kPa, 4.2 kgf/cm2 or bar) AWD models Front: 35 psi (240 kPa, 2.4 kgf/cm2 or bar) Rear: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Spare: 60 psi (420 kPa, 4.
6-1. Specifications Light bulbs Light Bulbs Bulb No.
6-1. Specifications Fuel information Your vehicle must use only unleaded gasoline. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada.
6-1. Specifications ■ Toyota recommends the use of gasoline containing detergent additives ● Toyota recommends the use of gasoline that contains detergent additives to avoid build-up of engine deposits. ● All gasoline sold in the U.S.A. contains minimum detergent additives to clean and/or keep clean intake systems, per EPA’s lowest additives concentration program. ● Toyota strongly recommends the use of Top Tier Detergent Gasoline.
6-1. Specifications ■ Toyota does not recommend gasoline containing MMT Some gasoline contains octane enhancing additive called MMT (Methylcyclopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service.
6-1. Specifications Tire information Typical tire symbols Full-size tire Compact spare tire 6 (→P. 460) DOT and Tire Identification Number (TIN) (→P. 459) Vehicle specifications Tire size Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Location of treadwear indicators (→P.
6-1. Specifications Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.
6-1. Specifications Typical DOT and Tire Identification Number (TIN) DOT symbol* Tire Identification (TIN) Number Tire manufacturer's identification mark Tire size code Manufacturer's optional type code (3 or 4 letters) tire Manufacturing week Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
6-1. Specifications Tire size ■ Typical tire size information The illustration indicates typical tire size.
6-1. Specifications Tire section names Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading.
6-1. Specifications ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100.
6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. Glossary of tire terminology Meaning Cold tire inflation pressure Tire pressure when the vehicle has been parked for three hours or more, or has not been driven more than 1 mile or 1.
6-1. Specifications Tire related term Meaning Normal occupant weight 150 lb. (68 kg) times the number of occupants specified in the second column of Table 1* that follows Occupant distribution Distribution of occupants in a vehicle as specified in the third column of Table 1* below Production options weight The combined weight of installed regular production options weighing over 5 lb. (2.
6-1.
6-1.
6-1.
6-1.
6-2. Customization Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. Programming these preferences requires specialized equipment and may be performed by your Toyota dealer. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer.
6-2. Customization Item Door lock (vehicles with power door lock system) (→P. 31) Illumination (→P. 279) Seat belt reminder (→P. 400) 470 MATRIX_U Default setting Customized setting Unlocking using a key Driver's door unlocked in one step, all doors unlocked in two steps All doors unlocked in one step Opening driver's door unlocks all doors Off On Shifting gears to P unlocks all doors. (vehicles with an automatic transmission) On Off Shifting gears to position other than P locks all doors.
6-3. Initialization Items to initialize The following items must be initialized for normal system operation in cases such as after maintenance is performed on the vehicle. Item When to initialize Reference Maintenance data (U.S.A. only) After the maintenance is performed P. 321 Tire pressure warning system (if equipped) • When rotating the tires on vehicles differing with front and rear tire inflation pressure. • When changing the tire size. P.
6-3.
For owners 7 Reporting safety defects for U.S. owners .............. 474 Seat belt instructions for Canadian owners (in French) ..................... 475 SRS airbag instructions for Canadian owners (in French) .....................
Reporting safety defects for U.S. owners If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité ● Déroulez la sangle diagonale de telle sorte qu'elle passe bien sur l'épaule, sans pour autant être en contact avec le cou ou glisser de l'épaule.
Entretien et soin ■ Ceintures de sécurité Nettoyez avec un chiffon ou une éponge humectée d'eau savonneuse tiède. Vérifiez régulièrement que les ceintures ne sont pas effilochées, entaillées ou exagérément usées. ATTENTION ■ Détérioration et usure des ceintures de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu'elles ne sont pas entaillées, effilochées et que leurs ancrages ne sont pas desserrés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu'elle ne soit remplacée.
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English. Coussins gonflables frontaux Le coussin gonflable conducteur et le coussin gonflable du passager avant Participent à la protection de la tête et du thorax du conducteur et du passager avant contre les chocs avec les éléments à l’intérieur.
Composants du système du coussin gonflable Capteurs du gonflable frontal coussin Système de classification de l’occupant du siège passager avant (ECU et capteurs) Coussin gonflable passager avant Coussins latéraux du gonflables Prétensionneurs de ceintures de sécurité et limiteurs de force Capteurs du coussin gonflable latéral et rideau Coussins rideaux gonflables Témoins indicateurs “AIR BAG ON” et “AIR BAG OFF” 478 MATRIX_U Témoin SRS d’avertissement Contacteur de la boucle de ceinture de sécu
Votre véhicule est équipé de COUSSINS GONFLABLES PERFECTIONNÉS, conçus selon les normes de sécurité américaines applicables aux véhicules à moteur (FMVSS208). Le boîtier électronique du coussin gonflable (ECU) régule le déploiement du coussin gonflable en fonction des informations qu’il reçoit des capteurs etc., indiqués ci-dessus dans le schéma illustrant les composants du système. Parmi ces informations figurent la gravité du choc et les informations concernant l’occupant du siège.
ATTENTION ■ Précautions concernant le coussin gonflable SRS Respectez les précautions suivantes concernant les coussins gonflables. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers du véhicule doivent porter correctement leurs ceintures de sécurité. Les coussins gonflables SRS sont des dispositifs complémentaires aux ceintures de sécurité.
ATTENTION ■ Précautions concernant le coussin gonflable SRS ●Si vous attachez une rallonge de ceinture de sécurité aux boucles de ceinture de sécurité avant, mais que la rallonge de la ceinture de sécurité n’est pas fixée au pêne de la ceinture, les coussins gonflables SRS frontaux jugeront que le conducteur et le passager avant ont attaché leur ceinture de sécurité, alors même que celle-ci n’est pas attachée.
ATTENTION ■ Précautions concernant le coussin gonflable SRS ● Ne pas s’asseoir sur le bord du siège ou s’appuyer contre le tableau de bord. ● Ne laissez pas un enfant se tenir debout devant le coussin gonflable SRS passager avant ou s’asseoir sur les genoux du passager avant. ● Ne conduisez pas le véhicule lorsque le conducteur ou le passager porte des éléments sur ses genoux. ● Ne vous appuyez pas contre la porte, le rail latéral de toit ou les montants avant, latéraux et arrière.
ATTENTION ■ Précautions concernant le coussin gonflable SRS ●Ne rien fixer ni ne disposer quoi que ce soit sur des emplacements tels que le tableau de bord ou la garniture du volant de direction. Ces éléments peuvent se transformer en projectile lors du déploiement des coussins gonflables SRS conducteur et passager avant. ●Ne fixez rien aux emplacements tels que la porte, la vitre du pare-brise, la vitre latérale, les montants avant et arrière, le rail latéral de toit ou la poignée d’assistance.
ATTENTION ■ Précautions concernant le coussin gonflable SRS ● Si vous avez des difficultés à respirer après le déploiement du coussin gonflable SRS, ouvrez une porte ou une vitre pour faire entrer de l’air frais, ou descendez du véhicule si cela ne présente aucun danger. Essuyez tout résidu dès que possible afin d’éviter une irritation cutanée.
Index Abbreviation list ..................... 486 Alphabetical index.................. 488 What to do if... ........................
Abbreviation list Abbreviation/Acronym list ABBREVIATIONS 2WD 2 Wheel Drive 4WD 4 Wheel Drive A/C Air Conditioning ABS Anti-lock Brake System ACC Accessory ALR Automatic Locking Retractor AWD All Wheel Drive CRS Child Restraint System ECU Electronic Control Unit EDR Event Data Recorder ELR Emergency Locking Retractor EPS Electric Power Steering GAWR Gross Axle Weight Rating GCWR Gross Combination Weight Rating GVWR Gross Vehicle Weight Rating I/M LATCH LED 486 MATRIX_U MEAN
Abbreviation list ABBREVIATIONS MEANING VIN Vehicle Identification Number VSC Vehicle Stability Control 487 MATRIX_U
Alphabetical index Alphabetical index A A/C.............................................186 ABS ...........................................152 Active Torque Control 4WD system ....................................152 Air conditioning filter...............365 Air conditioning system Air conditioning filter..............365 Air conditioning system ................................186 Airbags Airbag operating conditions.....76 Airbag precautions for your child ......................................
Alphabetical index B Back door Back door ............................... 36 Wireless remote control.......... 28 Back-up lights Wattage ................................ 453 Battery Checking .............................. 345 If the vehicle has a discharged battery ............. 425 Preparing and checking before winter ...................... 162 Bluetooth® audio..................... 251 Bluetooth® phone ................... 251 Bottle holder ............................ 287 Brake Fluid.......................
Alphabetical index Child safety Airbag precautions ..................80 Battery precautions .......346, 429 Child restraint system..............90 Child-protectors.......................32 How your child should wear the seat belt ..........................50 Installing child restraints..........94 Moon roof precautions ............63 Power window lock switch.......59 Power window precautions .....60 Removed key battery precautions .........................368 Seat belt extender precautions ................
Alphabetical index E Electric power steering........... 152 Emergency flashers Switch................................... 388 Emergency, in case of If a warning light turns on ..... 397 If the engine will not start...... 422 If the shift lever cannot be shifted from P..................... 423 If the vehicle has a discharged battery ............. 425 If the warning buzzer sounds ............................... 397 If you have a flat tire ............ 408 If you lose your keys.............
Alphabetical index F Floor mat...................................301 G Gas station information .......... 500 Fluid Brake.....................................343 Washer..................................347 Fog lights Replacing light bulbs .............378 Switch....................................141 Wattage.................................453 Front passenger occupant classification system ..............85 Front passenger's seat belt reminder light.........................400 Front seats Adjustment .....
Alphabetical index I I/M test...................................... 325 Identification number Engine .................................. 439 Vehicle.................................. 439 Ignition switch ......................... 118 Illuminated entry system ........ 280 Indicator lights ........................ 135 Initialization Items to initialize................... 471 Inside rear view mirror.............. 55 Interior lights Interior lights......................... 279 Switch............................
Alphabetical index M Maintenance Do-it-yourself maintenance .......................326 General maintenance............322 Maintenance data..................438 Maintenance requirements....320 Manual transmission Manual transmission .............127 Meter Instrument panel light control .................................134 Meters ...................................132 Mirrors Inside rear view mirror.............55 Side mirror heater .................193 Side mirrors.............................
Alphabetical index S Seat belts Adjusting the seat belt ............ 48 Automatic Locking Retractor .............................. 49 Child restraint system installation ............................ 94 Cleaning and maintaining the seat belts...................... 318 Emergency Locking Retractor .............................. 49 How to wear your seat belt..... 48 How your child should wear the seat belt ......................... 50 Pregnant women, proper seat belt use ................................
Alphabetical index Sunshade Roof.........................................62 Switch Emergency flasher switch .....388 Engine switch ........................118 Fog light switch .....................141 Hazard light switch ................388 Ignition switch........................118 Light switches........................138 Power door lock switch ...........31 Power window switch ..............59 Window lock switch .................59 Wiper and washer switch ......143 T Tachometer.........................
Alphabetical index W Warning buzzers Brake system........................ 397 Downshifting......................... 126 Seat belt reminder ................ 400 Warning lights Active Torque Control 4WD system warning light .......... 398 Anti-lock brake system ......... 398 Brake assist system ............. 398 Brake system........................ 397 Charging system .................. 398 Electric power steering warning light....................... 398 Engine oil maintenance ........
What to do if... What to do if... A tire punctures P. 408 If you have a flat tire P. 422 If the engine will not start The engine does not start P. 68 Engine immobilizer system P. 425 If the battery is discharged The shift lever cannot be moved out P. 423 If the shift lever cannot be shifted from P The engine coolant temperature gauge enters the red zone P. 430 If your vehicle overheats Steam can be seen coming from under the hood The key is lost P.
What to do if... ■Warning lights Brake system warning light Active Torque Control 4WD system warning light P. 398 or P. 397 Maintenance required reminder light P. 400 Charging system warning light P. 398 Tire pressure warning light P. 400 Low engine oil pressure warning light P. 398 Low windshield washer fluid level warning light P. 400 Malfunction indicator lamp Slip indicator light P. 398 or P. 398 SRS warning light P. 398 ABS warning light Cruise control indicator light* P.
GAS STATION INFORMATION Auxiliary catch lever P. 330 Hood lock release lever P. 330 Fuel filler door P. 64 Fuel filler door opener P. 64 Tire inflation pressure P. 451 Fuel tank capacity (Reference) 13.2 gal. (50 L, 10.9 Imp. gal.) Fuel type Unleaded gasoline only P. 451 Cold tire inflation pressure 1.8 L 4-cylinder (2ZR-FE) Engine oil engine capacity (Drain and refill 2.4 L reference) 4-cylinder (2AZ-FE) engine Engine oil type 500 MATRIX_U P. 65, 442 With filter Without filter qt. (L, Imp.
