Pictorial Index Search by illustration 1 For safety and security Make sure to read through them 2 Instrument cluster How to read the gauges and meters, the variety of warning lights and indicators, etc. 3 Operation of each component Opening and closing the doors and windows, adjustment before driving, etc. 4 Driving Operations and advices which are necessary for driving 5 Audio system Operating the audio system 6 Interior features Usage of the interior features, etc.
TABLE OF CONTENTS For your information .......................6 Reading this manual.......................8 How to search ................................9 Pictorial index ...............................10 1 For safety and security 1-1. For safe use Before driving.......................26 For safety drive ....................28 Seat belts.............................30 SRS airbags.........................37 Airbag manual on-off system49 Safety information for children ...................................
4 Driving 4-1. Before driving Driving the vehicle .............160 Cargo and luggage ............171 Trailer towing .....................173 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ....................182 Engine (ignition) switch (vehicles with a smart entry & start system) ............................185 Multidrive ...........................191 Manual transmission..........196 Turn signal lever ................200 Parking brake...................
TABLE OF CONTENTS 6 Interior features 6-1. Using the air conditioning system and defogger Manual air conditioning system.................................. 280 Automatic air conditioning system...................................287 Power heater .....................295 Seat heaters ......................297 6-2. Using the interior lights Interior lights list.................299 • Interior light....................299 • Personal lights ...............300 6-3.
8 When trouble arises 8-1. Essential information Emergency flashers ...........394 If your vehicle has to be stopped in an emergency ..............395 8-2. Steps to take in an emergency If your vehicle needs to be towed ...............................397 If you think something is wrong................................403 Fuel pump shut off system (gasoline engine only) ............404 If a warning light turns on or a warning buzzer sounds....405 If you have a flat tire (vehicles with a spare tire) .......
For your information Main Owner’s Manual Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice.
Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, before you scrap your vehicle.
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures. Follow the steps in numerical order. Indicates the action (pushing, turning, etc.) used to operate switches and other devices. Indicates the outcome of an operation (e.g. a lid opens).
How to search Searching by name • Alphabetical index ...... P. 500 Searching by installation position • Pictorial index ............... P. 10 Searching by symptom or sound • What to do if... (Troubleshooting) ....... P. 496 Searching by title • Table of contents ............ P.
Pictorial index Pictorial index Exterior The illustration represents the 5-door models and may differ from the body shape of the 3-door models. 1 Side doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 114 Locking/unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 114 Opening/closing the side windows . . . . . . . . . . . . . . . . . . . . . P. 154 Locking/unlocking by using the mechanical key*1 . . . . . . . . . P.
Pictorial index 4 Wipers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 210, 214 Precautions against winter season . . . . . . . . . . . . . . . . . . . . . P. 242 Precautions against car wash . . . . . . . . . . . . . . . . . . . . . . . . . P. 317 5 Fuel filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 216 Refueling method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 216 Fuel type/fuel tank capacity . . . . .
Pictorial index Instrument panel (Left-hand drive vehicles) 1 Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 182, 185 Starting the engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 182, 185 Changing engine switch positions/modes . . . . . . . . . . . . P. 183, 186 Emergency stop of the engine. . . . . . . . . . . . . . . . . . . . . . . . . P. 395 When the engine will not start . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 4 Multi-information display . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 90 5 Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 201 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 201 Precautions against winter season . . . . . . . . . . . . . . . . . . . . . P. 243 Warning buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 405 6 Turn signal lever . . . . . . . . .
Pictorial index Switches (Left-hand drive vehicles) 1 Outside rear view mirror switches . . . . . . . . . . . . . . . . . . . . P. 151 2 Manual headlight leveling dial . . . . . . . . . . . . . . . . . . . . . . . P. 204 3 Power heater switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 295 4 Tire pressure warning reset switch*1 . . . . . . . . . . . . . . . . . P. 349 5 Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 154 6 Door lock switch . . .
Pictorial index 1 Audio remote control switches*1 . . . . . . . . . . . . . . . . . . . . P. 248 2 Paddle shift switches*1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 193 3 Telephone switch*2 4 Speed limiter switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 224 5 Cruise control switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 220 1 “SPORT” switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index Interior (Left-hand drive vehicles) 1 SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 37 2 Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26 3 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 138 4 Rear seats*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141 5 Head restraints . . . . . . . . . . . . . . . . . . . .
Pictorial index 1 Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 148 2 Sun visors*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 309 3 Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 309 4 Interior light/personal lights . . . . . . . . . . . . . . . . . . . . . . . . . P. 299 5 Panoramic roof shade*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index Instrument panel (Right-hand drive vehicles) 1 Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 182, 185 Starting the engine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 182, 185 Changing engine switch positions/modes . . . . . . . . . . . . P. 183, 186 Emergency stop of the engine. . . . . . . . . . . . . . . . . . . . . . . . . P. 395 When the engine will not start . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 4 Multi-information display . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 90 5 Parking brake. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 201 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 201 Precautions against winter season . . . . . . . . . . . . . . . . . . . . . P. 243 Warning buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 405 6 Turn signal lever . . . . . . . . .
Pictorial index Switches (Right-hand drive vehicles) 1 Outside rear view mirror switches*1 . . . . . . . . . . . . . . . . . . P. 151 2 Manual headlight leveling dial . . . . . . . . . . . . . . . . . . . . . . . P. 204 3 Tire pressure warning reset switch*1 . . . . . . . . . . . . . . . . . P. 349 4 Window lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 154 5 Door lock switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 1 Audio remote control switches*1 . . . . . . . . . . . . . . . . . . . . P. 248 2 Paddle shift switches*1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 193 3 Telephone switch*2 4 Speed limiter switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 224 5 Cruise control switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 220 1 “SPORT” switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index Interior (Right-hand drive vehicles) 1 SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 37 2 Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26 3 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 138 4 Rear seats*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 141 5 Head restraints . . . . . . . . . . . . . . . . . . . .
Pictorial index 1 Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 148 2 Sun visors*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 309 3 Vanity mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 309 4 Interior light/personal lights . . . . . . . . . . . . . . . . . . . . . . . . . P. 299 5 Panoramic roof shade*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index
For safety and security 1 1-1. For safe use Before driving.......................26 For safety drive ....................28 Seat belts.............................30 SRS airbags.........................37 Airbag manual on-off system ...............................49 Safety information for children.........................52 Child restraint systems ........53 Installing child restraints ......63 Exhaust gas precautions .....73 1-2. Theft deterrent system Engine immobilizer system .......................
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. 1 Insert the retaining hooks (clips) into the floor mat eyelets. 2 Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the * marks. The shape of the retaining hooks (clips) may differ from that shown in the illustration.
1-1. For safe use 27 WARNING Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor. With the engine stopped and the shift lever in P (Multidrive) or N (manual transmission), fully depress each pedal to the floor to make sure it does not interfere with the floor mat. 1 For safety and security Observe the following precautions.
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture 1 Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer. (P. 138) 2 Adjust the seat so that you can depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel. (P.
1-1. For safe use 29 Adjusting the mirrors Make sure that you can see the rear of the vehicle clearly, by adjusting the inside and outside rear view mirrors properly. (P. 148, 151) WARNING 1 For safety and security Observe the following precautions. Failure to do so may result in death or serious injury. Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle.
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. Position the lap belt as low as possible over the hips. Adjust the position of the seatback. Sit up straight and well back in the seat. Do not twist the seat belt.
1-1. For safe use 31 Fastening the rear center seat belt 1 Take out the plate, and then pull the seat belt. 1 For safety and security 2 Push the plate into the buckle in the order of plate “A” and plate “B” until a clicking sound is heard.
1-1. For safe use Releasing and stowing the rear center seat belt 1 To release the hooked plate “B”, push the buckle release button. B 2 To release the hooked plate “A”, insert the plate “B” or the key or the mechanical key (P. 104) into the hole on the buckle. When releasing the seat belt, retract it slowly. 3 Stow the plates as shown in the illustration.
1-1. For safe use 33 Seat belt pretensioners (front seat) The pretensioners help the seat belts to quickly restrain the occupants by retracting the seat belts when the vehicle is subjected to certain types of severe frontal collision. Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
1-1. For safe use WARNING Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failure to do so may cause death or serious injury. Wearing a seat belt Ensure that all passengers wear a seat belt. Always wear a seat belt properly. Each seat belt should be used by one person only. Do not use a seat belt for more than one person at once, including children.
1-1. For safe use 35 WARNING 1 For safety and security People suffering illness Obtain medical advice and wear the seat belt in the proper way. (P. 30) When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.
1-1. For safe use WARNING When using the rear center seat belt Do not use the rear center seat belt with either buckle released. Fastening only one of the buckles may result in death or serious injury in case of sudden braking or a collision. Do not allow anyone sit on the rear center seat if the rear right seat is folded down, as the seat belt buckle for the rear center seat belt is then concealed under the folded seat and cannot be used.
1-1. For safe use 37 SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
1-1.
1-1. For safe use 39 The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. As the airbags deploy, a chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occupants. WARNING For safety and security SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury.
1-1. For safe use WARNING SRS airbag precautions The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag. The front passenger seat should be as far from the airbag as possible with the seatback adjusted, so the front passenger sits upright. Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag.
1-1. For safe use 41 WARNING SRS airbag precautions Vehicles without SRS curtain shield airbags: Do not lean against the front door. Vehicles with SRS curtain shield airbags: Do not lean against the door, the roof side rail or the front, side and rear pillars. Vehicles without an SRS driver knee airbag: Do not attach anything to or lean anything against areas such as the dashboard or steering wheel pad. These items can become projectiles when the SRS driver and front passenger airbags deploy.
1-1. For safe use WARNING SRS airbag precautions Vehicles without SRS curtain shield airbags: Do not attach anything to areas such as a door, windshield glass and side door glass. Vehicles with SRS curtain shield airbags: Do not attach anything to areas such as a door, windshield glass, side door glass, front or rear pillar, roof side rail and assist grip. (Except for the speed limit label P.
1-1. For safe use 43 WARNING 1 For safety and security SRS airbag precautions Do not strike or apply significant levels of force to the area of the SRS airbag components. Doing so can cause the SRS airbags to malfunction. Do not touch any of the component parts immediately after the SRS airbags have deployed (inflated) as they may be hot. If breathing becomes difficult after the SRS airbags have deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so.
1-1. For safe use If the SRS airbags deploy (inflate) Bruising and slight abrasions may result from contact with a deploying (inflating) SRS airbag. A loud noise and white powder will be emitted. Vehicles without SRS curtain shield airbags: Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats may be hot for several minutes. The airbag itself may also be hot.
1-1. For safe use 45 Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
1-1. For safe use Types of collisions that may not deploy the SRS airbags (SRS side airbags and SRS curtain shield airbags [if equipped]) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
1-1. For safe use 47 When to contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional In the following cases, the vehicle will require inspection and/or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Any of the SRS airbags have been inflated.
1-1. For safe use The surface of the seats with the side airbag is scratched, cracked, or otherwise damaged. Vehicles with SRS curtain shield airbags: The portion of the front pillars, rear pillars or roof side rail garnishes (padding) containing the curtain shield airbags is inside scratched, cracked, or otherwise damaged.
1-1. For safe use 49 Airbag manual on-off system This system deactivates the front passenger airbag. Only deactivate the airbags when using a child restraint system on the front passenger seat. 1 “PASSENGER AIR BAG” indi Vehicles without a smart entry & start system This indicator light turns on when the airbag system is on (only when the engine switch is in the “ON” position).
1-1. For safe use Deactivating the front seat passenger airbag Vehicles without a smart entry & start system Insert the key into the cylinder and turn to the “OFF” position. The “OFF” indicator light turns on (only when the engine switch is in the “ON” position). Vehicles with a smart entry & start system Insert the mechanical key into the cylinder and turn to the “OFF” position. The “OFF” indicator light turns on (only when the engine switch is in IGNITION ON mode).
1-1. For safe use 51 WARNING 1 For safety and security When installing a child restraint system For safety reasons, always install a child restraint system in a rear seat. In the event that the rear seat cannot be used, the front seat be used as long as the airbag manual on-off system is set to “OFF”. If the airbag manual on-off system is left “ON”, the strong impact of the airbag deployment (inflation) may cause serious injury or even death.
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehicle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. It is recommended that children sit in the rear seats to avoid accidental contact with the shift lever, wiper switch etc.
1-1. For safe use 53 Child restraint systems Toyota strongly urges the use of child restraint systems. Points to remember 1 For safety and security Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat. Choose a child restraint system that suits your vehicle and is appropriate to the age and size of the child. For installation details, follow the instructions provided with the child restraint system.
1-1. For safe use Types of child restraints Child restraint systems are classified into the following 5 groups according to the regulation ECE No.44: Group 0: Group 0+ Up to 10 kg (22 lb.) (0 - 9 months) : Up to 13 kg (28 lb.) (0 - 2 years) Group I: 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) Group II: 15 to 25 kg (34 to 55 lb.) (4 years - 7 years) Group III: 22 to 36 kg (49 to 79 lb.
1-1. For safe use 55 Child restraint system suitability for various seating positions Information provided in the table shows your child restraint system suitability for various seating positions. Front passenger seat Seating positions Front passenger seat Airbag manual on-off switch 0 Up to 10 kg (22 lb.) (0 - 9 months) 0+ Up to 13 kg (28 lb.) (0 - 2 years) I 9 to 18 kg (20 to 39 lb.) (9 months 4 years) II, III 15 to 36 kg (34 to 79 lb.
1-1. For safe use Rear outer seats Seating positions Right-hand Left-hand Mass groups 0 Up to 10 kg (22 lb.) (0 - 9 months) U Recommended child restraint systems U “TOYOTA G 0+, BABYSAFE” “TOYOTA G 0+, BABYSAFE PLUS” “TOYOTA G 0+, BABYSAFE PLUS with SEAT BELT FIXATION, BASE PLATFORM” 0+ Up to 13 kg (28 lb.) (0 - 2 years) U U “TOYOTA G 0+, BABYSAFE” “TOYOTA G 0+, BABYSAFE PLUS” “TOYOTA G 0+, BABYSAFE PLUS with SEAT BELT FIXATION, BASE PLATFORM” I 9 to 18 kg (20 to 39 lb.
1-1. For safe use 57 Rear center seat Seating positions Mass groups 0 Up to 10 kg (22 lb.) (0 - 9 months) Recommended child restraint systems L “TOYOTA G 0+, BABYSAFE” “TOYOTA G 0+, BABYSAFE PLUS” 1 L “TOYOTA G 0+, BABYSAFE” “TOYOTA G 0+, BABYSAFE PLUS” I 9 to 18 kg (20 to 39 lb.) (9 months - 4 years) L*2 “TOYOTA DUO+” II, III 15 to 36 kg (34 to 79 lb.
1-1. For safe use Child restraint system suitability for various seating positions (with ISOFIX rigid anchors) Information provided in the table shows your child restraint system suitability for various seating positions.
1-1. For safe use 59 (1) For the CRS which do not carry the ISO/XX size class identification (A to G), for the applicable mass group, the car manufacturer shall indicate the vehicle specific ISOFIX child restraint system(s) recommended for each position. Key of letters inserted in the above table: IUF: Suitable for ISOFIX forward-facing child restraint systems of universal category approved for the use in this mass group.
1-1.
1-1. For safe use 61 WARNING 1 For safety and security Child restraint precautions Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on. (P. 49) In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child. A forward-facing child restraint system may be installed on the front passenger seat only when it is unavoidable.
1-1. For safe use WARNING When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt. When the child restraint system is not in use Keep the child restraint system properly secured on the seat even if it is not in use.
1-1. For safe use 63 Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the seats using a seat belt or ISOFIX rigid anchors. Attach the top strap when installing a child restraint. ISOFIX rigid anchors (ISOFIX child restraint system) (vehicles with rear seats) Lower anchors are provided for the rear outer seats. (Tags displaying the location of the anchors are attached to the seats.
1-1. For safe use Installing child restraints using a seat belt Rear-facing Baby seat/child seat 1 Place the child restraint sys- tem on the rear seat facing the rear of the vehicle. 2 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. 3 Install a locking clip near the tab of the lap and shoulder belt by inserting the lap and shoulder webbing through the recesses of the locking clip. Buckle the belt again.
1-1. For safe use 65 Forward-facing Child seat 1 Remove the head restraint. (P. 144) 2 Place the child restraint sys- tem on the seat facing the front of the vehicle. 1 child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted. 4 Install a locking clip near the tab of the lap and shoulder belt by inserting the lap and shoulder webbing through the recesses of the locking clip. Buckle the belt again.
1-1. For safe use Junior seat 1 Place the child restraint sys- tem on the seat facing the front of the vehicle. 2 Sit the child in the child restraint system. Fit the seat belt to the child restraint system according to the manufacturer’s instructions and insert the plate into the buckle. Make sure that the belt is not twisted. Check that the shoulder belt is correctly positioned over the child’s shoulder and that the lap belt is as low as possible. (P.
1-1. For safe use 67 Installation with ISOFIX rigid anchors (ISOFIX child restraint system) (vehicles with rear seats) 1 Remove the head restraint. (P. 144) 2 Widen the gap between the seat cushion and seatback slightly. 3 Latch the buckles onto the anchors. For safety and security If the child restraint has a top strap, the top strap should be latched onto the anchor bracket.
1-1. For safe use Child restraint systems with a top strap (vehicles with rear seats) 1 Vehicles with a luggage cover: Remove the luggage cover. (P. 306) 2 Remove the head restraint. (P. 144) 3 Secure the child restraint sys- tem using the seat belt or ISOFIX rigid anchors. 4 Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top strap. Make sure the top strap is securely latched. 5 Vehicles with a luggage cover: Reinstall the luggage cover.
1-1. For safe use 69 WARNING When installing a child restraint system Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of a sudden braking, sudden swerving or an accident.
1-1. For safe use WARNING When installing a child restraint system Never use a rear-facing child restraint system on the front passenger seat when the airbag manual on-off switch is on. (P. 49) The force of the rapid inflation of the front passenger airbag can cause death or serious injury to children in the event of an accident. There is a label(s) on the passenger side sun visor, indicating it is forbidden to attach a rear-facing child restraint system to the front passenger seat.
1-1. For safe use 71 WARNING 1 For safety and security When installing a child restraint system If child restraint system regulations exist in the country where you reside, please contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional for the child restraint system installation. When a junior seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder.
1-1. For safe use WARNING When installing a child restraint system When using the rear right seat for the child restraint system, do not sit in the rear center seat. Seat belt function may be impaired, such as being positioned overly high or loose-fitting, which may result in death or serious injury in the event of sudden braking or an accident.
1-1. For safe use 73 Exhaust gas precautions Harmful substances to the human body are included in exhaust gases if inhale. WARNING For safety and security Exhaust gases contain harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard. Important points while driving Keep the back door closed.
1-2. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
1-2.
1-2.
1-2. Theft deterrent system 77 Certifications for the engine immobilizer system (vehicles without a smart entry & start system) The DECLARATION of CONFORMITY (DoC) is available at the following address: http://www.tokai-rika.co.
1-2. Theft deterrent system NOTICE To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
1-2. Theft deterrent system 79 Double locking system Unauthorized access to the vehicle is prevented by disabling the door unlocking function from both the interior and exterior of the vehicle. 1 For safety and security Vehicles employing this system have labels on the window glass of both front doors.
1-2. Theft deterrent system Canceling the double locking system Using the entry function (vehicles with a smart entry & start system): Hold either front outside door handle or push up the back door opener switch. Using the wireless remote control: Press . WARNING Double locking system precaution Never activate the double locking system when there are people in the vehicle because all the doors cannot be opened from inside the vehicle.
Instrument cluster 2 2. Instrument cluster Warning lights and indicators ...........................82 Gauges and meters .............88 Multi-information display ......90 Fuel consumption information.........................
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all warning lights and indicators illuminated. This illustration represents a meter with a tachometer and may differ from the look of the meter without a tachometer.
2. Instrument cluster 83 Warning lights Warning lights inform the driver of malfunctions in the indicated vehicle’s systems. *1 *2 Brake system warning light (P. 405) Cruise control indicator light (P. 407) (Yellow) *1 *2 Speed limiter indicator (P. 407) Charging system warning light (P. 405) 2 (Yellow) *1, 2, 5 Low engine oil pressure warning light (P. 405) *1 (Red) *1 High engine coolant temperature warning light (P. 406) Malfunction indicator lamp (P.
2. Instrument cluster *2, 7 *2 Rear passengers’ seat belt reminder lights (P. 408) Tire pressure warning light (P. 408) *1, 6 Low engine oil level warning light (P. 409) *1, 6 Engine oil change reminder light (P. 410) *1: These lights turn on when the engine switch is turned to the “ON” position (vehicles without a smart entry & start system) or IGNITION ON mode (vehicles with a smart entry & start system) to indicate that a system check is being performed.
2. Instrument cluster 85 Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator (P. 200) Headlight high beam indicator (P. 203) *5 “SPORT” indicator (P. 192) *1, 7 Gear Shift Indicator (P. 198) 2 *2 Cruise control indicator (P. 220) (Green) *2 Front fog light indicator (P. 208) *2 “SET” indicator (P. 220) *2 Speed limiter indicator (P. 224) Rear fog light indicator (P.
2. Instrument cluster *9 *1, 2 VSC OFF indicator (P. 237) “PASSENGER AIR BAG” indicator (P. 49) *1: Vehicles without a smart entry & start system: These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off.
2. Instrument cluster 87 WARNING If a safety system warning light does not come on Should a safety system light such as the ABS and SRS warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately if this occurs.
2. Instrument cluster Gauges and meters 1 Tachometer (if equipped) Displays the engine speed in revolutions per minute. 2 Speedometer Displays the vehicle speed. 3 Fuel gauge (if equipped) Displays the quantity of fuel remaining in the tank. 4 Display change button P. 91 5 Multi-information display Presents the driver with a variety of driving-related data. (P. 90) 6 Clock adjusting buttons P.
2. Instrument cluster 89 Instrument panel light control The brightness of the instrument panel lights (when the headlight switch is on) can be adjusted. Display the instrument panel light control by pressing the display change button. (P. 91) Then, press and hold the button. Adjust the brightness to the desired level by pressing the button.
2. Instrument cluster Multi-information display The multi-information display presents the driver with a variety of driving-related data including the clock. Display contents Type A Type C Type B 1 Clock (P. 93) 2 Outside temperature display (P. 94) 3 Shift position and gear step position indicator (P. 191) 4 Drive information (P.
2. Instrument cluster . 91 Changing the display Items displayed can be switched by pressing the display change button. 2 Drive information Displays the total distance the vehicle has been driven. Trip meter Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display different distances independently. Press and hold the button for longer than 1 second to reset.
2. Instrument cluster Average fuel consumption Displays the average rate of fuel consumption. • The function can be reset by pressing the button for longer than 1 second when the average fuel consumption is displayed. • Use the displayed average fuel consumption as a reference. Instantaneous fuel consumption Displays the instantaneous of fuel consumption. Use the displayed instantaneous fuel consumption as a reference.
2. Instrument cluster 93 Eco Driving Indicator Light customization (if equipped) Eco Driving Indicator Light can be activated or deactivated by pressing the display change button when the Eco Driving Indicator Light customization display is displayed. To change the Eco Driving Indicator Light customization display, display the odometer and press and hold the display change button until the display changes.
2. Instrument cluster Outside temperature display The temperature display shows temperatures within the range of -40°C (-40°F) and 50°C (122°F). Display In the following situations, the correct outside temperature may not be displayed, or the display may take longer than normal to change: When the vehicle is stopped, or moving at low speeds (less than 25 km/h [16 mph]) When the outside temperature has changed suddenly (at the entrance/exit of a garage, tunnel, etc.
2. Instrument cluster 95 WARNING Cautions during setting up the display As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
2. Instrument cluster Fuel consumption information Fuel consumption information can be displayed on the navigation/multimedia system. Navigation/multimedia system Trip information (navigation/multimedia system) 1 Press the button on the navigation/multimedia system.
2. Instrument cluster 97 2 Select “Trip information”. 1 Average vehicle speed since the engine was started. 2 Cruising range (P. 99) 3 Fuel consumption in the past 15 minutes 4 Elapsed time since engine was started. the 5 Resetting the consumption 2 data Vehicles with a smart entry & start system: Average fuel consumption for the past 15 minutes is divided by color into past averages and averages attained since the engine switch was last turned to IGNITION ON mode.
2. Instrument cluster Past record (navigation/multimedia system) 1 Press the button on the navigation/multimedia system. 2 Select “Past record”. 1 Best recorded fuel consump- tion 2 Previous fuel consumption record 3 Average fuel consumption 4 Updating the average fuel consumption data 5 Resetting the past record data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated.
2. Instrument cluster Updating the past record data Update the average fuel consumption by selecting “Update” to measure the current fuel consumption again. Resetting the data The fuel consumption data can be deleted by selecting “Clear”. Cruising range Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
2.
Operation of each component 3 3-1. Key information Keys...................................102 3-2. Opening, closing and locking the doors Side doors..........................114 Back door...........................121 Smart entry & start system .....................127 3-3. Adjusting the seats Front seats.........................138 Rear seats .........................141 Head restraints ..................144 3-4. Adjusting the steering wheel and mirrors Steering wheel ...................
3-1. Key information Keys The keys The following keys are provided with the vehicle. Vehicles without a smart entry & start system (type A) 1 Keys 2 Key number plate Vehicles without a smart entry & start system (type B) 1 Key (with a wireless remote control function) Operating the wireless remote control function (P.
3-1. Key information 103 Vehicles with a smart entry & start system 1 Electronic keys • Operating the smart entry & start system (P. 127) • Operating the wireless remote control function (P. 115) 2 Mechanical keys 3 Key number plate Wireless remote control Vehicles without a smart entry & start system 3 1 Locks all the doors (P. 115) Vehicles with a smart entry & start system 1 Locks all the doors (P. 115) 2 Unlocks all the doors (P.
3-1. Key information Using the master key (vehicles without a smart entry & start system) Press the button to open the key. To stow, press the button then fold the key. Using the mechanical key (vehicles with a smart entry & start system) To take out the mechanical key, slide the release knob and take the key out. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key.
3-1. Key information 105 3 Operation of each component When riding in an aircraft When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying a key in your bag etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.
3-1. Key information Electronic key battery depletion (vehicles with a smart entry & start system) The standard battery life is 1 to 2 years. If the battery becomes low, an alarm will sound in the cabin when the engine stops. (P. 417) As the electronic key always receives radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indicate that the electronic key battery may be depleted. Replace the battery when necessary. (P.
3-1.
3-1.
3-1.
3-1.
3-1.
3-1.
3-1. Key information 113 NOTICE 3 Operation of each component To prevent key damage Do not drop the keys, subject them to strong shocks or bend them. Do not expose the keys to high temperatures for a long periods of time. Do not get the keys wet or wash them in an ultrasonic washer, etc. Do not attach metallic or magnetic materials to the keys or place the keys close to such materials. Do not disassemble the keys. Do not attach a sticker or anything else to the surface of the key.
3-2. Opening, closing and locking the doors Side doors Unlocking and locking the doors from the outside The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switches. Entry function (vehicles with a smart entry & start system) Carry the electronic key to enable this function. 1 Grip the handle to unlock the doors. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked.
3-2.
3-2. Opening, closing and locking the doors Keys (vehicles without a smart entry & start system) Turning the key operates the doors as follows: Driver’s door 1 Locks all the doors 2 Unlocks all the doors Front passenger’s door (vehicles with a key cylinder) 1 Locks the door 2 Unlocks the door Operation signals (vehicles with an entry function or wireless remote control) The emergency flashers flash to indicate that the doors have been locked/ unlocked.
3-2. Opening, closing and locking the doors 117 Security feature Vehicles without a smart entry & start system If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again. Vehicles with a smart entry & start system If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
3-2. Opening, closing and locking the doors Unlocking and locking the doors from the inside Door lock switch 1 Unlocks all the doors 2 Locks all the doors Inside door lock buttons 1 Locks the doors 2 Unlocks the doors The front doors can be opened by pulling the inside handle even if the inside door lock button is in the lock position.
3-2. Opening, closing and locking the doors 119 Locking the front doors from the outside without a key 1 Move the inside door lock button to the lock position. 2 Close the door while pulling the door handle. Vehicles without a smart entry & start system The door cannot be locked if the key is in the engine switch. Vehicles with a smart entry & start system The door cannot be locked if the engine switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle.
3-2. Opening, closing and locking the doors Impact detection door lock release system In the event that the vehicle is subject to a strong impact, all the doors are unlocked. Depending on the force of the impact or the type of accident, however, the system may not operate. Using the mechanical key (vehicles with a smart entry & start system) The doors can also be locked and unlocked with the mechanical key. (P.
3-2. Opening, closing and locking the doors 121 Back door The back door can be locked/unlocked and opened by the following procedures. Unlocking and locking the back door Door lock switch P. 118 Entry function (vehicles with a smart entry & start system) Carry the electronic key to enable this function. 3 1 Press the button to unlock The door cannot be unlocked for 3 seconds after the door is locked. 2 Press the button to lock the door. Wireless remote control (if equipped) P.
3-2. Opening, closing and locking the doors Keys From the back door (vehicles with a back door key cylinder): 1 Unlocks all the doors 2 Locks all the doors From the driver’s door: P. 116 Opening the back door from the outside the vehicle (vehicles with a smart entry & start system) Raise the back door while pushing up the back door opener switch. The back door cannot be closed immediately after the back door opener switch is pushed.
3-2. Opening, closing and locking the doors 123 3 Operation of each component Operation signals (vehicles with an entry function or wireless remote control) P. 116 Security feature P. 117 Door lock buzzer (vehicles with a smart entry & start system) P. 117 Luggage compartment light The luggage compartment lights turn on when the back door is opened.
3-2. Opening, closing and locking the doors WARNING Observe the following precautions. Failure to do so may result in death or serious injury. Before driving Make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving and hit near-by objects or luggage in the luggage compartment may be thrown out, causing an accident. Do not allow children to play in the luggage compartment.
3-2. Opening, closing and locking the doors 125 WARNING If anyone is in the vicinity, make sure they are safe and let them know that the back door is about to open or close. Use caution when opening or closing the back door in windy weather as it may move abruptly in strong wind. The back door may suddenly shut if it is not opened fully. It is more difficult to open or close the back door on an incline than on a level surface, so beware of the back door unexpectedly opening or closing by itself.
3-2. Opening, closing and locking the doors NOTICE Back door damper stays The back door is equipped with damper stays that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door damper stay, resulting in malfunction. Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod. Do not touch the damper stay rod with gloves or other fabric items.
3-2. Opening, closing and locking the doors 127 Smart entry & start system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.) Locks and unlocks the side doors (P. 114) Locks and unlocks the back door (P. 121) Starts and stops the engine (P.
3-2. Opening, closing and locking the doors Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 0.7 m (2.3 ft.) either of the outside front door handles and back door. (Only the doors detecting the key can be operated.) When starting the engine or changing engine switch modes The system can be operated when the electronic key is inside the vehicle.
3-2. Opening, closing and locking the doors Alarm 129 Situation/Actions An attempt was made to lock the doors other Interior alarm pings than using the smart entry & start system while once and exterior alarm the electronic key was still inside the vehicle. sounds once for 5 secRetrieve the electronic key from the vehicle onds (on some models) and lock the doors again.
3-2. Opening, closing and locking the doors Conditions affecting operation The smart entry & start system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart entry & start system, wireless remote control and engine immobilizer system from operating properly. (Ways of coping: P.
3-2. Opening, closing and locking the doors 131 3 Operation of each component Notes for the entry function Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
3-2. Opening, closing and locking the doors Notes for the unlocking function A sudden approach to the effective range or door handle may prevent the doors from being unlocked. In this case, return the door handle to the original position and check that the doors unlock before pulling the door handle again. Gripping the door handle when wearing a glove may not unlock the door. Remove the gloves and touch the sensor on the back of the handle again.
3-2. Opening, closing and locking the doors 133 Certification for the smart entry & start system The DECLARATION of CONFORMITY (DoC) is available at the following address: http://www.tokai-rika.co.
3-2.
3-2.
3-2.
3-2. Opening, closing and locking the doors 137 C WARNING 3 Operation of each component Caution regarding interference with electronic devices People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the smart entry & start system antennas. (P. 127) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled.
3-3.
3-3. Adjusting the seats 139 Moving front passenger’s seat for rear seat entry (3-door models only) Getting in the vehicle For easy access to the rear seat, use the seatback lock release lever. When the seatback lock release lever is used, the seat’s original slide position is memorized, so the seat may be returned to that original position. However, if the seatback angle adjustment lever is used, the seat will not return to its original position.
3-3. Adjusting the seats After passengers have entered the vehicle (3-door models only) Slide the seat backward and then lift the seatback. The seat will be set and locked to its previous position automatically. If the seat cannot be slid back to the previous position due to the rear passenger or luggage, the seat will be locked in that position, disabling the seat position memory system.
3-3. Adjusting the seats 141 Rear seats The seatbacks of the rear seats can be folded down. Folding down the rear seatbacks 1 Stow the rear seat belt buckles as shown. 3 Operation of each component 2 Stow the seat belts. Center: P. 32 Outside: Use the seat belt hangers to prevent the belts from being tangled. 3 Lower the head restraints to the lowest position.
3-3. Adjusting the seats 4 Pull the seatback lock release knob and fold the seatback down. Each seatback may be folded separately. WARNING When folding the rear seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury. Do not fold the seatbacks down while driving. Stop the vehicle on level ground, set the parking brake and shift the shift lever to P (Multidrive) or N (manual transmission).
3-3. Adjusting the seats 143 WARNING After returning the rear seatback to the upright position Observe the following precautions. Failure to do so may result in death or serious injury. Make sure that the seatback is securely locked in position by lightly pushing it back and forth. If the seatback is not securely locked, the red marking will be visible on the seatback lock release knob. Make sure that the red marking is not visible.
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Adjusting the head restraints 1 Up Pull the head restraints up. 2 Down Push the head restraint down while pressing the lock release button. Lock release button Removing the front seats and rear center seat head restraints Pull the head restraint up while pressing the lock release button.
3-3. Adjusting the seats 2 145 Pull the head restraint up while pushing the lock release button. Lock release button Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. 3 WARNING Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure 1 Hold the steering wheel and push the lever down. 2 Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the steering wheel. Horn To sound the horn, press on or close to the mark.
3-4. Adjusting the steering wheel and mirrors 147 WARNING Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury. After adjusting the steering wheel Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view. Adjusting the height of rear view mirror (vehicles with an auto anti-glare inside rear view mirror) The height of the rear view mirror can be adjusted to suit your driving posture. Adjust the height of the rear view mirror by moving it up and down.
3-4. Adjusting the steering wheel and mirrors 149 Anti-glare function Vehicles with a manual anti-glare inside rear view mirror Reflected light from the headlights of vehicles behind can be reduced by operating the lever. 1 Normal position 2 Anti-glare position 3 Vehicles with an auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced.
3-4. Adjusting the steering wheel and mirrors To prevent sensor error (vehicles with an auto anti-glare inside rear view mirror) To ensure that the sensors operate properly, do not touch or cover them. WARNING Caution while driving Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors 151 Outside rear view mirrors Adjustment procedure Manually-adjustable type Adjust the mirror up, down, in or out by pushing the mirror surface. 3 Power-adjustable type 1 To select a mirror to adjust, press the switch. 1 Left 2 Right 2 To adjust the mirror, press the switch.
3-4. Adjusting the steering wheel and mirrors Folding the mirrors Manual type Push the mirror back in the direction of the vehicle’s rear. Power type Press the button to fold back the mirrors Push once more to return to the original position. The outside rear view mirrors will be folded or extended automatically, linked with the door locking or unlocking operations.
3-4. Adjusting the steering wheel and mirrors 153 WARNING 3 Operation of each component Important points while driving Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. Do not adjust the mirrors while driving. Do not drive with the mirrors folded. Both the driver and passenger side mirrors must be extended and properly adjusted before driving.
3-5. Opening and closing the windows Power windows Opening and closing procedures The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows: 1 Closing 2 One-touch closing (driver’s win- dow only)* 3 Opening 4 One-touch opening window only)* (driver’s *: To stop the window partway, operate the switch in the opposite direction. Window lock switch Press the switch down to lock the passenger window switches.
3-5. Opening and closing the windows 155 3 Operation of each component The power windows can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON” position. Vehicles with a smart entry & start system The engine switch is in IGNITION ON mode.
3-5. Opening and closing the windows When the power window does not close normally If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the driver’s door.
3-5. Opening and closing the windows 157 WARNING 3 Operation of each component Observe the following precautions. Failure to do so may result in death or serious injury. Closing the windows The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window.
3-5.
Driving 4-1. Before driving Driving the vehicle .............160 Cargo and luggage ............171 Trailer towing .....................173 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) ....................182 Engine (ignition) switch (vehicles with a smart entry & start system) ....................185 Multidrive ...........................191 Manual transmission..........196 Turn signal lever ................200 Parking brake ....................
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 182, 185 Driving Vehicles with a Multidrive 1 With the brake pedal depressed, shift the shift lever to D. (P. 191) 2 Release the parking brake. (P. 201) 3 Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle. Vehicles with a manual transmission 1 While depressing the clutch pedal, shift the shift lever to 1.
4-1. Before driving 161 Stopping Vehicles with a Multidrive 1 With the shift lever in D, depress the brake pedal. Vehicles with a Stop & Start system: If the Stop & Start system is enabled, depressing the brake pedal will stop the engine. (P. 228) 2 If necessary, set the parking brake. If the vehicle is to be stopped for an extended period of time, shift the shift lever to P. (P. 191) Vehicles with a manual transmission 1 While depressing the clutch pedal, depress the brake pedal.
4-1. Before driving Vehicles with a manual transmission 1 While depressing the clutch pedal, depress the brake pedal. 2 Set the parking brake. (P. 201) 3 Shift the shift lever to N. (P. 196) If parking on a hill, shift the shift lever to 1 or R and block the wheels as needed. 4 Vehicles without a smart entry & start system: Turn the engine switch to the “LOCK” position to stop the engine. Vehicles with a smart entry & start system: Press the engine switch to stop the engine.
4-1. Before driving 163 4 Driving Driving in the rain Drive carefully when it is raining, because visibility will be reduced, the windows may become fogged-up, and the road will be slippery. Drive carefully when it starts to rain, because the road surface will be especially slippery. Refrain from high speeds when driving on an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the steering and brakes from operating properly.
4-1. Before driving Idling time before stopping the diesel engine To prevent damage to the turbocharger, allow the engine to idle immediately after high-speed driving or driving up a hill. Driving condition Normal city driving Idling time Not necessary Constant speed of approximately 80 km/h (50 mph) Approximately 20 seconds Constant speed of approximately 100 km/h (63 mph) Approximately 1 minute Steep hill driving or continuous driving at 100 km/h (63 mph) or more (race track driving etc.
4-1. Before driving 165 WARNING 4 Driving Observe the following precautions. Failure to do so may result in death or serious injury. When starting the vehicle On vehicles with a Multidrive, always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping. When driving the vehicle Do not drive if you are unfamiliar with the location of the brake and accelerator pedals to avoid depressing the wrong pedal.
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When driving on slippery road surfaces Sudden braking, acceleration and steering may cause tire slippage and reduce your ability to control the vehicle. Sudden acceleration, engine braking due to shifting, or changes in engine speed could cause the vehicle to skid. After driving through a puddle, depress the brake pedal to make sure that the brakes are functioning properly.
4-1. Before driving 167 WARNING 4 Driving If you hear a squealing or scraping noise (brake pad wear indicators) Have the brake pads checked and replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Rotor damage may result if the pads are not replaced when needed. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded.
4-1. Before driving WARNING Do not attach adhesive discs to the windshield or windows. Do not place containers such as air fresheners on the instrument panel or dashboard. Adhesive discs or containers may act as lenses, causing a fire in the vehicle. Do not leave a door or window open if the curved glass is coated with a metallized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire.
4-1. Before driving 169 NOTICE 4 Driving When driving the vehicle Vehicles with a Multidrive Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill. Vehicles with a manual transmission Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output.
4-1. Before driving NOTICE Avoiding damage to vehicle parts Do not turn the steering wheel fully in either direction and hold it there for an extended period of time. Doing so may damage the power steering motor. When driving over bumps in the road, drive as slowly as possible to avoid damaging the wheels, underside of the vehicle, etc. Diesel engine only: Make sure to idle the engine immediately after highspeed driving or hill climbing.
4-1. Before driving 171 Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load: WARNING 4 Driving Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compartment: Receptacles containing gasoline Aerosol cans Storage precautions Observe the following precautions.
4-1. Before driving WARNING Load and distribution Do not overload your vehicle. Do not apply loads unevenly. Improper loading may cause deterioration of steering or braking control which may cause death or serious injury.
4-1. Before driving 173 Trailer towing Your vehicle is designed primarily as a passenger carrying vehicle. Towing a trailer will have an adverse effect on handling, performance, braking, durability, and fuel consumption. Your safety and satisfaction depend on the proper use of correct equipment and cautions driving habits. For your safety and the safety of others, do not overload the vehicle or trailer.
4-1. Before driving Important points regarding trailer loads Total trailer weight and permissible drawbar load 1 Total trailer weight Weight of the trailer itself plus the trailer load should be within the maximum towing capacity. Exceeding this weight is dangerous. (P. 468) When towing a trailer, use a friction coupler or friction stabilizer (sway control device). 2 Permissible drawbar load Allocate the trailer load so that the drawbar load is greater than 25 kg (55.1 lb.
4-1. Before driving 175 Information tag (manufacturer’s label) Type A 1 Gross vehicle mass 2 Maximum permissible rear axle capacity Type B 1 Gross vehicle mass 2 Maximum permissible rear axle capacity 4 Driving Gross vehicle mass Vehicle category M1 models* The combined weight of the driver, passengers, luggage, towing hitch, total curb mass and drawbar load should not exceed the gross vehicle mass by more than 100 kg (220.5 lb.). Exceeding this weight is dangerous.
4-1. Before driving Maximum permissible rear axle capacity Vehicle category M1 models* The weight borne by the rear axle should not exceed the maximum permissible rear axle capacity by 15% or more. Exceeding this weight is dangerous. Vehicle category N1 models* The weight borne by the rear axle should not exceed the maximum permissible rear axle capacity. Exceeding this weight is dangerous. The values for towing capacity were derived from testing conducted at sea level.
4-1. Before driving 177 Installation positions* for the towing hitch/bracket and hitch ball 1 434 mm (17.1 in.) 2 434 mm (17.1 in.) 4 4 602 mm (23.7 in.) 5 468 mm (18.4 in.) 6 313 mm (12.3 in.) 7 397 mm (15.6 in.) 8 26.2 mm (1.0 in.) *: Gross vehicle mass and standard tire size To distinguish the vehicle category, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Driving 3 655 mm (25.8 in.
4-1. Before driving Tire information Increase the tire inflation pressure to 20.0 kPa (0.2 kgf/cm2 or bar, 3 psi) greater than the recommended value when towing. (P. 483) Increase the air pressure of the trailer tires in accordance with the total trailer weight and according to the values recommended by the manufacturer of your trailer. Trailer lights Check that the turn signal lights and stoplights are operating correctly every time you hitch up the trailer.
4-1. Before driving 179 NOTICE When the rear bumper strengthening material is aluminum Ensure the steel bracket part does not come directly in contact with that area. When steel and aluminum come into contact, there is a reaction similar to corrosion, which will weaken the section concerned and may result in damage. Apply a rust inhibitor to parts that will come in contact when attaching a steel bracket. Guidance Your vehicle will handle differently when towing a trailer.
4-1. Before driving Sudden acceleration/steering input/cornering Executing sharp turns when towing may result in the trailer colliding with your vehicle. Decelerate well in advance when approaching turns and take them slowly and carefully to avoid sudden braking. Important points regarding turning The wheels of the trailer will travel closer to the inside of the curve than the wheels of the vehicle. To make allowance for this, take the turns wider than you would normally do.
4-1. Before driving 181 If the engine overheats Towing a loaded trailer up a long, steep incline in temperatures exceeding 30C (85F) may result in the engine overheating. If the high engine coolant temperature warning light flashes or comes on, turn the air conditioning off immediately, leave the road and stop the vehicle in a safe place. (P. 458) When parking the vehicle Always place wheel chocks under the wheels of both the vehicle and trailer.
4-2. Driving procedures Engine (ignition) switch (vehicles without a smart entry & start system) Starting the engine Gasoline engine 1 Check that the parking brake is set. 2 Check that the shift lever is set in P (Multidrive) or N (manual trans- mission). 3 Firmly depress the brake pedal (Multidrive) or clutch pedal (manual transmission). 4 Turn the engine switch to the “START” position to start the engine. Diesel engine 1 Check that the parking brake is set.
4-2. Driving procedures 183 Changing engine switch positions 1 “LOCK” The steering wheel is locked and the key can be removed. (Vehicles with a Multidrive: The key can be removed only when the shift lever is in P.) 2 “ACC” Some electrical components such as the audio system can be used. 3 “ON” All electrical components can be used. 4 “START” For starting the engine. 1 Shift the shift lever to P (Multidrive) or N (manual transmission). (P.
4-2. Driving procedures When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK” position. To free it, turn the key while turning the steering wheel slightly left and right. Key reminder function A buzzer sounds if the driver’s door is opened while the engine switch is in the “LOCK” or “ACC” position to remind you to remove the key. WARNING When starting the engine Always start the engine while sitting in the driver’s seat.
4-2. Driving procedures 185 Engine (ignition) switch (vehicles with a smart entry & start system) Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch mode. Starting the engine 1 Check that the parking brake is set. 2 Check that the shift lever is set in P (Multidrive) or N (manual trans- mission). 3 Firmly depress the brake pedal (Multidrive) or clutch pedal (manual transmission).
4-2. Driving procedures Stopping the engine 1 Stop the vehicle. 2 Shift the shift lever to P (Multidrive) or N (manual transmission). 3 Set the parking brake. (P. 201) 4 Press the engine switch. 5 Release the brake pedal (Multidrive) or clutch pedal (manual trans- mission) and check that the smart entry & start system indicator light (green) is off.
4-2. Driving procedures 187 When stopping the engine with the shift lever in a position other than P (Multidrive) If the engine is stopped with the shift lever in a position other than P, the engine switch will not be turned off but instead be turned to ACCESSORY mode. Perform the following procedure to turn the switch off: 1 Check that the parking brake is set. 2 Shift the shift lever to P.
4-2. Driving procedures If the engine does not start The engine immobilizer system may not have been deactivated. (P. 74) Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. On vehicles with a Multidrive, check that the shift lever is securely set in P. The engine may not start if the shift lever is displaced out of P. The smart entry & start system indicator light (green) will flash quickly.
4-2. Driving procedures 189 Operation of the engine switch When operating the engine switch, one short, firm press is enough. If the switch is pressed improperly, the engine may not start or the engine switch mode may not change. It is not necessary to press and hold the switch. If the smart entry & start system has been deactivated in a customized setting P. 490 WARNING 4 Driving When starting the engine Always start the engine while sitting in the driver’s seat.
4-2. Driving procedures NOTICE To prevent battery discharge Do not leave the engine switch in ACCESSORY or IGNITION ON mode for long periods of time without the engine running. If the smart entry & start system indicator light (green) is illuminated, the engine switch is not off. When exiting the vehicle, always check that the engine switch is off. On vehicles with a Multidrive, do not stop the engine when the shift lever is in a position other than P.
4-2. Driving procedures 191 Multidrive Shifting the shift lever 4 Vehicles without a smart entry & start system While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped. Vehicles with a smart entry & start system While the engine switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.
4-2. Driving procedures Shift position purpose Shift position Function P Parking the vehicle or starting the engine R Reversing N Neutral D Normal driving* or temporary gear step selection driving*2 M 7-speed sport sequential shiftmatic mode driving (P. 193) 1 *1: To improve fuel consumption and reduce noises, set the shift lever in the D position for normal driving. * 2: By selecting gear step using paddle shift switches, you can control engine braking forces.
4-2. Driving procedures 193 Changing gear steps in 7-speed sport sequential shiftmatic mode Shift the shift lever to the M position and operate the shift lever or paddle shift switch. 1 Upshifting 2 Downshifting The gear step changes once every time the shift lever or paddle shift switch is operated. The selected gear step, from 1 to 7, will be displayed in the multiinformation display.
4-2. Driving procedures Temporally gear steps selection mode in the D position To drive in temporary gear steps selection mode, operate the “-” and “+” paddle shift switch. The gear steps can then be selected by operating the “-” and “+” paddle shift switches. By selecting gear step using paddle shift switches, you can control engine braking forces. 1 Upshifting 2 Downshifting The gear step changes once every time the paddle shift switch is operated.
4-2. Driving procedures 195 WARNING When driving on slippery road surfaces Do not accelerate or shift gears suddenly. Sudden changes in engine braking may cause the vehicle to spin or skid, resulting in an accident. 4 Driving When the vehicle comes to a stop with the shift lever in the M position The transmission will automatically downshift to M1 once the vehicle is stopped. After a stop, the vehicle will start off in M1. When the vehicle is stopped, the transmission is set at M1.
4-2. Driving procedures Manual transmission Shifting the shift lever 5-speed transmission Fully depress the clutch pedal before operating the shift lever, and then release it slowly. If it is difficult to shift in reverse, shift the shift lever to N, release the clutch pedal momentarily, and then try again.
4-2. Driving procedures 197 6-speed transmission Fully depress the clutch pedal before operating the shift lever, and then release it slowly. Shift the shift lever to R while lifting up the ring section.
4-2. Driving procedures Gear Shift Indicator The Gear Shift Indicator is a guide to help the driver achieve improved fuel economy and reduced exhaust emissions within limits of engine performance. 1 Upshifting 2 Downshifting Gear Shift Indicator display The Gear Shift Indicator may not be displayed when your foot is placed on the clutch pedal. Maximum downshifting speeds Observe the downshifting speeds in the following table to prevent over-revving the engine.
4-2. Driving procedures 199 WARNING Gear Shift Indicator display For safety, the driver should not look only at the display. Refer to the display when it is safe to do so while considering actual traffic and road conditions. Failure to do so may lead to an accident. NOTICE To prevent damage to the 6-speed transmission Do not shift the shift lever to R without depressing the clutch pedal. 4 Driving Do not lift up the ring section except when shifting the lever to R.
4-2. Driving procedures Turn signal lever Operation instructions 1 Right turn 2 Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever. 3 Lane change to the left (push and hold the lever partway) The left hand signals will flash until you release the lever. 4 Left turn Turn signals can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON” position.
4-2. Driving procedures 201 Parking brake Operation instructions 1 To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. 2 To release the parking brake, slightly raise the lever and lower it completely while pressing the button. 4 Driving Parking brake engaged warning buzzer P. 405 Usage in winter time P. 243 NOTICE Before driving Fully release the parking brake.
4-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Operation instructions Turning the end of the lever turns on the lights as follows: 1 Off 2 The front position, tail, license plate and instrument panel lights turn on. 3 The headlights and all the lights listed above turn on.
4-3. Operating the lights and wipers 203 Turning on the high beam headlights 1 With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. 2 Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off. Follow me home system This system allows the low beam headlights to be turned on for 30 seconds when the engine switch is turned off.
4-3. Operating the lights and wipers Manual headlight leveling dial The level of the headlights can be adjusted according to the number of passengers and the loading condition of the vehicle.
4-3. Operating the lights and wipers 205 Vehicle category N1* Loading condition Control switch position Driver only 0 Driver + full luggage loading to the luggage room 4 *: To distinguish the vehicle category, ask any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
4-3. Operating the lights and wipers Automatic light off system (if equipped) Vehicles without a smart entry & start system When the light switch is in or : The headlights and front fog lights turn off automatically when the engine switch is turned to the “LOCK” position. When the light switch is in : The headlights and all the lights turn off automatically when the engine switch is turned to the “LOCK” position.
4-3. Operating the lights and wipers 207 Battery-saving function In all conditions following below, the headlights and the other remaining lights will go off automatically after 20 minutes in order to prevent the vehicle battery from being discharged: The headlights and/or tail lights are on. The light switch is in or . NOTICE To prevent battery discharge Do not leave the lights on longer than necessary when the engine is not running.
4-3. Operating the lights and wipers Fog light switch The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. Operation instructions Rear fog light switch 1 Turns the rear fog lights off 2 Turns the rear fog lights on Releasing the switch ring returns it to . Operating the switch ring again turns the lights off.
4-3. Operating the lights and wipers 209 Front and rear fog light switch (if equipped) 1 Turns the front and rear fog lights off 2 Turns the front fog lights on 3 Turns both front and rear fog lights on Releasing the switch ring . returns it to Operating the switch ring again turns only the rear fog lights off. 4 Driving Fog lights can be used when Vehicles with a rear fog light switch The headlights are turned on.
4-3. Operating the lights and wipers Windshield wiper and washer Operating the wiper lever Operate the lever as follows to operate the wiper. Intermittent windshield wiper 1 Off 2 Intermittent windshield wiper operation 3 Low speed windshield wiper operation 4 High speed windshield wiper operation 5 Temporary operation 6 Washer/wiper dual operation The wiper will automatically operate a couple of times after the washer squirts.
4-3. Operating the lights and wipers 211 Rain-sensing windshield wiper When is selected, the wiper will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume and vehicle speed.
4-3. Operating the lights and wipers 8 Washer/wiper dual operation The wiper will automatically operate a couple of times after the washer squirts. (After operating several times, the wiper operate one more time after a short delay to prevent dripping.) The windshield wiper and washer can be operated when Vehicles without a smart entry & start system The engine switch is in the “ON” position. Vehicles with a smart entry & start system The engine switch is in IGNITION ON mode.
4-3. Operating the lights and wipers 213 When the sensor sensitivity ring is turned toward high while in “AUTO” mode, the wiper will operate once to indicate that the sensor sensitivity is enhanced. If the temperature of the raindrop sensor is 90°C (194°F) or higher, or -15°C (5°F) or lower, automatic operation may not occur. In this case, operate the wiper in any mode other than “AUTO” mode.
4-3. Operating the lights and wipers Rear window wiper and washer Operation instructions Turning the end of the lever turns on the rear window wiper and washer. 1 Off 2 Intermittent window wiper operation 3 Normal window operation 4 Washer/wiper dual operation 5 Washer/wiper dual operation wiper The wiper will automatically operate a couple of times after the washer squirts.
4-3. Operating the lights and wipers 215 NOTICE When the rear window is dry Do not use the wiper, as it may damage the rear window. When the washer fluid tank is empty Do not operate the switch continually as the washer fluid pump may overheat. When a nozzle becomes blocked In this case, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Do not try to clear it with a pin or other object. The nozzle will be damaged.
4-4. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle Close all the doors and windows, and turn the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system). Confirm the type of fuel. Fuel types Gasoline engine EU area: Unleaded gasoline conforming to European standard EN228, Research Octane Number of 95 or higher.
4-4. Refueling 217 WARNING 4 Driving When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity. It is important to discharge static electricity before refueling because sparks resulting from static electricity can cause fuel vapors to ignite while refueling.
4-4. Refueling NOTICE Refueling Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control system to operate abnormally, damage fuel system components, or the vehicle’s painted surface. Opening the fuel tank cap 1 Pull up the opener to open the fuel filler door. 2 Turn the fuel tank cap slowly to open.
4-4. Refueling 219 Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction. WARNING When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
4-5. Using the driving support systems Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal. 1 Indicators 2 Cruise control switch Setting the vehicle speed 1 Press the “ON-OFF” button to activate the cruise control. Cruise control indicator (green) will come on. Press the button again to deactivate the cruise control. 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
4-5. Using the driving support systems 221 Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. 1 Increases the speed 2 Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold the lever in the desired direction. The set speed will be increased or decreased as follows: Fine adjustment: By approximately 1.6 km/h (1 mph) each time the lever is operated.
4-5. Using the driving support systems Cruise control can be set when Vehicles with a Multidrive The shift lever is in the D or range 4 or higher of M has been selected. Range 4 or higher has been selected by using the paddle shift. Vehicle speed is above approximately 40 km/h (25 mph). Vehicles with a manual transmission Vehicle speed is above approximately 40 km/h (25 mph). Accelerating after setting the vehicle speed The vehicle can be accelerated normally.
4-5. Using the driving support systems 223 WARNING To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
4-5. Using the driving support systems Speed limiter Summary of function The desired maximum speed can be set using the cruise control switch. The speed limiter prevents vehicle speed from exceeding the set speed. 1 Display 2 Indicator (green) 13 Speed limiter switch Setting the vehicle speed 1 Press the speed limiter switch to activate the speed limiter. Speed limiter indicator (green) will come on. Press the switch again to deactivate the speed limiter.
4-5. Using the driving support systems 225 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed. The vehicle speed at the moment the lever is released becomes the set speed. Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. 1 Increases the speed 2 Decreases the speed When the set speed is shown in “MPH” Fine adjustment: By approximately 1.6 km/h (1 mph) each time the lever is operated.
4-5. Using the driving support systems Canceling and resuming the speed limiter 1 Pulling the lever toward you cancels the speed limiter. 2 Pushing the lever up resumes the speed limiter. Speed limiter can be set when The speed limiter can be set at any vehicle speed. However, if the speed limiter is set while the vehicle speed is below 30 km/h (18 mph), the speed limiter will be set to 30 km/h (18 mph).
4-5. Using the driving support systems 227 WARNING To avoid operating the speed limiter by mistake Switch the speed limiter off using the speed limiter switch when not in use. Situations unsuitable for the speed limiter Do not use the speed limiter in either of the following situations. Doing so may result in loss of control and could cause a serious or fatal accident.
4-5. Using the driving support systems Stop & start system The stop & start system stops and restarts the engine according to the brake pedal and shift lever operation (Multidrive) or clutch pedal operation (manual transmission) for stopping and starting the vehicle. Stopping the engine Vehicles with a Multidrive 1 While driving in D or M, depress the brake pedal fully, and stop the vehicle. 2 The engine will stop and the Stop & Start indicator will come on.
4-5. Using the driving support systems 229 Restarting the engine Vehicles with a Multidrive Release the brake pedal. When the shift lever is in N or P, depress brake pedal and shift the shift lever to D or M. The engine will restart. The Stop & Start indicator will go off. Vehicles with a manual transmission Check that the shift lever is in N and depress the clutch pedal. The engine will restart. The Stop & Start indicator will go off.
4-5. Using the driving support systems If the Stop & Start cancel switch is pressed while the vehicle is stopped When the engine is stopped by the Stop & Start system, pressing the Stop & Start cancel switch will restart the engine. From the next time the vehicle is stopped (after Stop & Start system has been turned off), the engine will not be stopped. With the Stop & Start system disabled, pressing the Stop & Start cancel switch will re-enable the system but not stop the engine.
4-5. Using the driving support systems 231 Automatic reactivation of the Stop & Start system Vehicles without a smart entry & start system Even if the Stop & Start system is disabled by the Stop & Start cancel switch, it will be automatically re-enabled once the engine switch is turned to the “LOCK” position then to the “START” position.
4-5. Using the driving support systems The Stop & Start system protection feature Vehicles without a smart entry & start system When an excessively loud sound is being projected by the audio system, the audio system may be automatically cut off in order to maintain power for the Stop & Start system function. If this occurs, turning the engine switch to the “LOCK” position then to the “ACC” or “ON” position re-enables the audio system.
4-5. Using the driving support systems 233 4 Driving If the Stop & Start cancel indicator light continues to flash The Stop & Start system may be malfunctioning. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If the windshield is fogged up while the engine is stopped by the Stop & Start system Vehicles with an automatic air conditioning system Turn the windshield defogger on. (The engine will start due to the automatic engine start function.
4-5. Using the driving support systems WARNING When the Stop & Start system is operating Keep the shift lever in N (manual transmission) and apply the brake pedal or parking brake for safety while the engine is stopped due to the Stop & Start system (while the Stop & Start indicator is on). Unexpected accidents may occur due to the automatic engine start function. Do not leave the vehicle while the engine is stopped due to the Stop & Start system (while the Stop & Start indicator is on).
4-5. Using the driving support systems 235 Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle.
4-5. Using the driving support systems When the TRC/VSC systems are operating The slip indicator light will flash while the TRC/VSC systems are operating. Disabling the TRC systems If the vehicle gets stuck in mud, dirt or snow, the TRC system may reduce power from the engine to the wheels. Pressing VSC OFF switch to turn the system off may make it easier for you to rock the vehicle in order to free it. To turn the TRC system off, quickly press and release the VSC OFF switch.
4-5. Using the driving support systems 237 4 Driving Turning off both TRC and VSC systems To turn TRC and VSC systems off, press and hold the VSC OFF switch for more than 3 seconds while the vehicle is stopped. The “TRC OFF” indicator light and the VSC OFF indicator light will come on. Press the switch again to turn the systems back on. When the “TRC OFF” indicator light comes on even if the VSC OFF switch has not been pressed TRC cannot be operated.
4-5. Using the driving support systems Operating conditions of emergency brake signal When the following three conditions are met, the emergency brake signal will operate: The emergency flashers are off. Actual vehicle speed is over 55 km/h (35 mph). The brake pedal is depressed in a manner that cause the system to judge from the vehicle deceleration that this is a sudden braking operation.
4-5. Using the driving support systems 239 WARNING 4 Driving When the VSC is activated The slip indicator light flashes. Always drive carefully. Reckless driving may cause an accident. Exercise particular care when the indicator light flashes. When the TRC/VSC systems are turned off Be especially careful and drive at a speed appropriate to the road conditions. As these are the systems to help ensure vehicle stability and driving force, do not turn the TRC/VSC systems off unless unnecessary.
4-5. Using the driving support systems Diesel particulate filter system When the deposit collected by the filter reaches a predetermined amount, it is automatically cleaned. Cleaning the DPF catalytic converter Cleaning the DPF catalytic converter is performed as necessary in accordance with driving conditions.
4-5. Using the driving support systems 241 WARNING Exhaust pipe Do not touch the exhaust pipe during cleaning, as the exhaust pipe and exhaust gases will become particularly hot. Also, make sure that there are no people or flammable materials near the exhaust pipe while the vehicle is stopped. Failure to do so may cause injury by burning or a fire.
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. Preparation for winter Use fluids that are appropriate to the prevailing outside temperatures. • Engine oil • Engine coolant • Washer fluid Have a service technician inspect the condition of the battery.
4-6. Driving tips 243 When driving the vehicle Accelerate the vehicle slowly, keep a safe distance between you and the vehicle ahead, and drive at a reduced speed suitable to road conditions. When parking the vehicle Park the vehicle and move the shift lever to P (Multidrive) 1 or R (manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released. If necessary, block the wheels to prevent inadvertent sliding or creeping.
4-6. Driving tips Tire chain installation Observe the following precautions when installing and removing chains: Install and remove tire chains in a safe location. Install tire chains on the front tires only. Do not install tire chains on the rear tires. Install tire chains on front tires as tightly as possible. Retighten chains after driving 0.5 1.0 km (1/4 1/2 mile). Install tire chains following the instructions provided with the tire chains.
Audio system 5 5-1. Basic Operations Audio system types............246 Steering wheel audio switches...........................248 USB port ............................249 5-2. Using the audio system Optimal use of the audio system .............................250 5-3. Using the radio Radio operation .................252 5-4. Playing audio CDs and MP3/WMA discs CD player operation...........257 5-5. Using an external device Listening to an iPod ...........266 Listening to a USB memory device .........
5-1. Basic Operations Audio system types Vehicles with a Navigation/Multimedia system Owners of models equipped with a Navigation/Multimedia system should refer to the “Navigation and multimedia system Owner’s Manual”.
5-1. Basic Operations 247 Vehicles without a Navigation/Multimedia system CD player and AM/FM radio The illustration below is for left-hand drive vehicles. Some button positions are reversed for right-hand drive vehicles. NOTICE To prevent battery discharge Do not leave the audio system on longer than necessary when the engine is stopped. To avoid damaging the audio system Take care not to spill drinks or other fluids over the audio system.
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navigation system. For details, refer to the manual provided with the audio system or navigation system.
5-1. Basic Operations 249 USB port Connect an iPod, USB memory device or portable audio player to the USB port as indicated below. Press to select “iPod” or “USB”. Connecting using the USB port iPod Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on. 5 USB memory device Turn on the power of the USB memory device if it is not turned on. Portable audio player Open the cover and connect the portable audio player.
5-2. Using the audio system Optimal use of the audio system Sound quality (treble/bass) and volume balance can be adjusted. 1 Displays the current mode 2 Changes the following set- ting • Sound quality and volume balance (P. 251) The sound quality and balance setting can be changed to produce the best sound. • Automatic Sound Levelizer on/off (P. 251) STO51AP005 3 Selecting the mode Using the audio control function Changing sound quality modes 1 Press . 2 Turn to select “Sound Setting”.
5-2. Using the audio system Adjusting sound quality Turning adjusts the level. Sound quality mode Mode displayed Level Turn to the left Turn to the right Bass* “BASS” -5 to 5 Treble* “TREBLE” -5 to 5 Low High Front/rear volume balance “FADER” R7 to F7 Shifts to rear Shifts to front Left/right volume balance “BALANCE” L7 to R7 Shifts to left Shifts to right *: The sound quality level is adjusted individually in each audio mode.
5-3. Using the radio Radio operation Select “AM” or “FM” to begin listening to the radio.
5-3. Using the radio 253 Setting station presets 1 Search for a desired station by turning on or pressing “” or “” . 2 Press and hold the button (from [1] to [6]) the station is to be set to until you hear a beep. Using the station list Updating the station list 1 Press . The station list will be displayed. 2 Press (UPDATE) to update the list. “Updating” is displayed while the searching is in process, and then available stations will be listed on the display.
5-3. Using the radio RDS (Radio Data System) This feature allows your radio to receive station. Listening to stations of the same network 1 Press 2 Turn 3 Turn . to “RADIO” and press . as corresponds to the desired mode: “FM AF” or “Region code”. 43 Press to select “ON” or “OFF”. FM AF ON mode: The station among those of the same network with strong reception is selected.
5-3. Using the radio 255 Traffic information 1 Press . 2 Turn to “RADIO” and press 3 Turn to “FM TA” mode. 43 Press . to select “ON” or “OFF”. TP mode: The system automatically switches to traffic information when a broadcast with a traffic information signal is received. The station returns to the previous one when the traffic information ends. TA mode: The system automatically switches to traffic information when a broadcast with a traffic information signal is received.
5-3. Using the radio EON (Enhanced Other Network) system (for traffic announcement function) If the RDS station (with EON data) you are listening to is not broadcasting a traffic information program and the audio system is in the TA (traffic announcement) mode, the radio will be switched automatically to a station broadcasting a traffic information program in the EON AF list when traffic information begins. When the battery is disconnected Stations presets are erased.
5-4. Playing audio CDs and MP3/WMA discs 257 CD player operation Insert a disc or press to beginning to a disc. 5 Audio system 1 Power 7 Selecting a folder 2 Volume 8 Back button 3 Disc eject 9 Playback 4 Repeat play 10 Displays track/folder list 5 Random playback 11 Selecting a track, fast-forward- 6 Selecting a track/file or dis- ing or reversing plays text message Loading CDs or MP3 and WMA discs Insert a disc.
5-4. Playing audio CDs and MP3/WMA discs Ejecting CDs or MP3 and WMA discs Press and remove the disc. Using the CD player Selecting a track Turn or press “” to move up or “” to move down using until the desired track number is displayed. Selecting a track from a track list 1 Press . The track list will be displayed. 2 Turn and press to select a track. To return to the previous display, press or .
5-4. Playing audio CDs and MP3/WMA discs Playing back MP3 and WMA discs Selecting a folders one at a time Press “” or “” on to select the desired folder. Selecting a folder and file from folder list 1 Press . The folder list will be displayed. 2 Turn and press to select a folder and a file. To return to the previous display, press To exit, press . . Returning to the first folder Press and hold “” on until you hear a beep.
5-4. Playing audio CDs and MP3/WMA discs Switching the display Press . Track title, Artist name and Album title (MP3 only) are shown on the display. To return to the previous display, press or . Display Up to 24 characters can be displayed. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all. Error messages If an error message is displayed, refer to the following table and take the appropriate measures.
5-4. Playing audio CDs and MP3/WMA discs 261 Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration. 5 Audio system CDs with copy-protect features may not be used. CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.
5-4. Playing audio CDs and MP3/WMA discs WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) Compatible media Media that can be used for MP3 and WMA playback are CD-Rs and CDRWs.
5-4. Playing audio CDs and MP3/WMA discs 263 5 Audio system ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
5-4. Playing audio CDs and MP3/WMA discs WARNING Certification for the CD player This product is a class I laser product. Do not open the cover of the player or attempt to repair the unit yourself. Refer servicing to qualified personnel.
5-4. Playing audio CDs and MP3/WMA discs 265 NOTICE Discs and adapters that cannot be used Do not use the following types of discs. Also, do not use 8 cm (3 in.) disc adapters, Dual Discs or printable discs. Doing so may damage the player and/or the disc insert/eject function. 5 Audio system Discs that have a diameter that is not 12 cm (4.7 in.). Low-quality or deformed discs. Discs with a transparent or translucent recording area.
5-5. Using an external device Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Press until “iPod” is displayed. Connecting an iPod P.
5-5. Using an external device Selecting a play mode 1 Press (MENU) to select iPod menu mode. 2 Turning clockwise changes the play mode in the following order: “Playlists” “Artists” “Albums” “Songs” “Podcasts” “Genres” “Composers” “Audiobooks” 3 Press to select the desired play mode.
5-5. Using an external device Selecting a list 1 Turn to display the first selection list. 2 Press to select the desired item. Pressing the knob changes to the second selection list. 3 Repeat the same procedure to select the desired item. To return to the previous selection list, press . Selecting songs Turn or press “” or “” on to select the desired song. Selecting a song from the song list 1 Press . The song list will be displayed. 2 Turn 3 Press to select a song. to play the song.
5-5. Using an external device 269 Shuffle playback Pressing (RDM) changes modes in the following order: Track shuffle Album shuffle Off. Switching the display Press . Track title, Artist name and Album title are shown on the display. To return to the previous display, press or . Adjusting sound quality and volume balance 1 Press 2 Turning to enter iPod menu mode. changes sound modes. (P.
5-5. Using an external device iPod functions When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume play from the same point in which it was last used. Depending on the iPod that is connected to the system, certain functions may not be available. If a function is unavailable due to a malfunction (as opposed to a system specification), disconnecting the device and reconnecting it once again may resolve the problem.
5-5. Using an external device 271 Compatible models Model iPod iPod nano iPod touch iPod classic Software version 5th generation Ver. 1.3.0 or higher 1st generation Ver. 1.3.1 or higher 2nd generation Ver. 1.1.3 or higher 3rd generation Ver. 1.1.3 or higher 4th generation Ver. 1.0.4 or higher 5th generation Ver. 1.0.1 or higher 1st generation Ver. 3.1.2 or higher 2nd generation Ver. 3.1.2 or higher Late 2009 (8 GB) Ver. 3.1.2 or higher Late 2009 (32 GB/64 GB) Ver. 3.1.
5-5. Using an external device WARNING Caution while driving Do not connect iPod or operate the controls. NOTICE To prevent damage to iPod Do not leave iPod in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the iPod. Do not push down on or apply unnecessary pressure to the iPod while it is connected as this may damage the iPod or its terminal. Do not insert foreign objects into the port as this may damage the iPod or its terminal.
5-5. Using an external device 273 Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Press until “USB” is displayed. Connecting a USB memory P.
5-5. Using an external device Selecting a folder Selecting a folders one at a time Press “” or “” on to select the desired folder. Selecting a folder and file from folder list 1 Press . The folder list will be displayed. 2 Turn and press to select a folder and a file. To return to the previous display, press To exit, press . . Returning to the first folder Press and hold “” on until you hear a beep. Selecting files Turn or press “” or “” on to select the desired file.
5-5. Using an external device 275 Random playback Pressing (RDM) changes modes in the following order: Folder random Disc random Off. Switching the display Press . Track title, Artist name and Album title (MP3 only) are displayed on the display. To return to the previous display, press or . Message Cause/Correction procedures “ERROR” This indicates a problem in the USB memory or its connection. “NO MUSIC” This indicates that no MP3/WMA files are included in the USB memory device.
5-5. Using an external device USB memory Compatible devices USB memory that can be used for MP3 and WMA playback Compatible device formats The following device formats can be used: • USB communication formats: USB2.0 FS (12 Mbps) • File formats: FAT12/16/32 (Windows) • Correspondence class: Mass storage class MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
5-5. Using an external device 277 5 Audio system WMA file compatibility • Compatible standards WMA Ver. 9 • Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz) • Compatible bit rates HIGH PROFILE 32-320 (kbps, VBR) File names The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ID3 and WMA tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.
5-5. Using an external device Playback • To play MP3 files with steady sound quality, we recommend a fixed bit rate of at least 128 kbps and a sampling frequency of 44.1 kHz. • There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.
Interior features 6 6-1. Using the air conditioning system and defogger Manual air conditioning system .............................280 Automatic air conditioning system .............................287 Power heater .....................295 Seat heaters ......................297 6-3. Using the storage features List of storage features ......301 • Glove box ......................302 • Cup holders ...................303 • Bottle holders ................304 • Auxiliary box ..................
6-1. Using the air conditioning system and defogger Manual air conditioning system The illustration below is for left-hand drive vehicles. Some dial and button positions are reversed for right-hand drive vehicles.
6-1. Using the air conditioning system and defogger 281 Adjusting the temperature setting Vehicles without the button Turn the temperature control dial clockwise to increase the temperature. Vehicles with the button To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air.
6-1. Using the air conditioning system and defogger Other functions Switching between outside air and recirculated air modes (P. 282) Defogging the windshield (P. 282) Defogging the rear window and outside rear view mirrors (P. 283) Other functions Switching between outside air and recirculated air modes Turn the outside/recirculated air mode dial. Select to change to recirculated air mode. Select to change to outside air mode.
6-1. Using the air conditioning system and defogger 283 Defogging the rear window and outside rear view mirrors Vehicles with a rear window defogger Defoggers are used to defog the rear window. Press . The defoggers will automatically turn off after a period of time. Vehicles with rear window and outside rear view mirror defoggers Defoggers are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors. Press .
6-1. Using the air conditioning system and defogger Front side outlets Direct air flow to the left or right, up or down. 1 Open the vent. 2 Close the vent. Fogging up of the windows Vehicles with the button: The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively. Vehicles with the button: If you turn off, the windows may fog up more easily.
6-1. Using the air conditioning system and defogger When the indicator light on 285 goes off by itself (vehicles with the button) Press to turn off the dehumidification function and turn it on again. There may be a problem in the air conditioning system if the indicator light goes off again. Turn the air conditioning system off and have it inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
6-1. Using the air conditioning system and defogger WARNING To prevent the windshield from fogging up Do not set the air outlet selector dial to during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
6-1. Using the air conditioning system and defogger 287 Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting.
6-1.
6-1. Using the air conditioning system and defogger 289 Fan speed setting Press “” on to increase the fan speed. Press “” on to decrease the fan speed. Press to turn the fan off. Change the airflow mode To change the air outlets, press . The air outlets used are switched each time the button is pressed.
6-1. Using the air conditioning system and defogger Using automatic mode 1 Press . Air outlets and fan speed are automatically adjusted according to the temperature setting. 2 Adjust the temperature setting. 3 To stop the operation, press . Air outlets Location of air outlets The air outlets and air volume changes according to the selected airflow mode. : Some models Other functions Switching between outside air and recirculated air modes Press .
6-1. Using the air conditioning system and defogger 291 Defogging the windshield Defoggers are used to defog the windshield and front side windows. Press . The dehumidification function operates and fan speed increases. Set the outside/recirculated air mode button to outside mode if recirculated air mode is used. (It may switch automatically.) To defog the windshield and the side windows early, turn the air flow and temperature up.
6-1. Using the air conditioning system and defogger Adjusting the position, opening and closing the air outlets Front center outlets 1 Direct air flow to the left or right, up or down. 2 Turn the knob to open or close the vent. Front side outlets Direct air flow to the left or right, up or down. 1 Open the vent. 2 Close the vent.
6-1. Using the air conditioning system and defogger 293 Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed. Fogging up of the windows The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the wind- shield effectively.
6-1. Using the air conditioning system and defogger Ventilation and air conditioning odors To let fresh air in, set the air conditioning system to the outside air mode. During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
6-1. Using the air conditioning system and defogger 295 Power heater This feature is used to keep the cabin warm in cold conditions. Power heater Turns the power heater on/off The power heater turns on about 25 seconds after the switch is pressed, and takes about another 85 seconds to warm up. : If equipped 6 Interior features Power heater can be operated when The engine is running.
6-1. Using the air conditioning system and defogger WARNING To prevent burns or damage to your vehicle Do not touch the heater or its exhaust pipe as they are hot. You may burn yourself. Keep flammable items such as fuel away from the heater and its exhaust pipe, as this may cause a fire. NOTICE To prevent damage to your vehicle Do not turn the heater on and off repeatedly in 5 minute intervals as this can shorten the life of the heater components.
6-1. Using the air conditioning system and defogger 297 Seat heaters Operating instructions 1 Turns on the front left seat heater 2 Turns on the front right seat heater The indicator light comes on. The seat heaters can be used when Vehicles without a smart entry & start system: The engine switch is in the “ON” position. Vehicles with a smart entry & start system: The engine switch is in IGNITION ON mode. When not in use Turn the seat heater off.
6-1. Using the air conditioning system and defogger WARNING Burns Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically challenged • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.) Do not cover the seat with anything when using the seat heater.
6-2. Using the interior lights 299 Interior lights list 1 Interior light (P. 299) 2 Personal lights (P.
6-2. Using the interior lights Personal lights 1 On 2 Off Illuminated entry system Vehicles without a smart entry & start system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are opened/ closed.
6-3. Using the storage features 301 List of storage features 1 Glove box (P. 302) 3 Bottle holders (P. 304) 2 Cup holders (P. 303) 4 Auxiliary box (P. 305) Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may result in the following when cabin temperature becomes high: Glasses may be deformed by heat or cracked if they come into contact with other stored items. Lighters or spray cans may explode.
6-3. Using the storage features Glove box Pull up the lever to open the glove box. Using the glove box vent (if equipped) Air from the air conditioning system can be distributed into the glove box by opening and closing the vent. 1 Open 2 Close The air is conditioned the same as the air for the passenger side vent. Perishable items should not be put in the box. WARNING Caution while driving Keep the glove box closed.
6-3. Using the storage features 303 Cup holders Front Rear 6 WARNING Interior features Items unsuitable for the cup holders Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury. To prevent burns, cover hot drinks when placed in the cup holders.
6-3. Using the storage features Bottle holders When using the bottle holders When storing a bottle, close the cap. The bottle may not be stored depending on its size or shape. WARNING Items unsuitable for the bottle holders Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
6-3. Using the storage features 305 Auxiliary box Type A Type B Open the cover. Type C 6 Caution while driving (Type B) Keep the auxiliary boxes closed. In the event of sudden braking, an accident may occur due to an occupant being struck by an open auxiliary box or the items stored inside.
6-3. Using the storage features Luggage compartment features Luggage cover (if equipped) The luggage cover can be removed by the following procedure: 1 Unhook the cords and return the luggage cover to horizontal position. 2 Lift the luggage cover and pull it toward you to remove it.
6-3. Using the storage features 307 Deck board (if equipped) Deck board height adjustment 1 Upper position 2 Lower position The lower position can be used when the deck board is placed on the luggage floor cover. Removing the deck board Lift the deck board and pull it toward you to remove it. 6 Interior features WARNING When operating the deck board Do not place anything on the deck board when operating the board.
6-3. Using the storage features Auxiliary box (if equipped) Lift the deck board and the luggage floor cover.
6-4. Other interior features 309 Other interior feature Sun visors 1 To set the visor in the forward position, flip it down. 2 To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. Vanity mirrors Open the cover.
6-4. Other interior features Vanity lights can be used when Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system The engine switch is ACCESSORY or IGNITION ON mode. NOTICE To prevent battery discharge (vehicles with vanity lights) Do not leave the vanity lights on for extended periods while the engine is not running. Portable ashtray (if equipped) The ashtray can be installed in a cup holder. (P.
6-4. Other interior features 311 Cigarette lighter (if equipped) Push the cigarette lighter. The cigarette lighter will pop up when it is ready for use. The cigarette lighter can be used when Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system The engine switch is in ACCESSORY or IGNITION ON mode. WARNING 6 Interior features To avoid burns or fires Do not touch the metal parts of the cigarette lighter.
6-4. Other interior features Power outlet (if equipped) Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). Open the lid. The power outlets can be used when Vehicles without a smart entry & start system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart entry & start system The engine switch is in ACCESSORY or IGNITION ON mode.
6-4. Other interior features 313 Armrest (if equipped) Fold down the armrest for use. NOTICE To prevent damage to the armrest Do not apply too much load on the armrest. Panoramic roof shade (if equipped) The panoramic roof shade can be opened and closed manually. Opening the panoramic roof shade Pushing the tabs will release the lock, and the shade can be opened. 6 Interior features Closing the panoramic roof shade Pull the tabs to the lock position to close the shade.
6-4. Other interior features Assist grips An assist grip installed on the ceiling can be used to support your body while sitting on the seat. WARNING Assist grip Do not use the assist grip when getting in or out of the vehicle or rising from your seat. Doing so could damage the assist grip, or could cause you to injure yourself by falling over. NOTICE To prevent damage to the assist grip Do not hang any heavy object or put a heavy load on the assist grip.
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior ..........316 Cleaning and protecting the vehicle interior ...........319 7-2. Maintenance Maintenance requirements....................322 7 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ......................325 Hood ..................................328 Positioning a floor jack.......330 Engine compartment..........332 Tires...................................347 Tire inflation pressure .
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois. For hard-to-remove marks, use car wash soap and rinse thoroughly with water. Wipe away any water.
7-1. Maintenance and care Aluminum wheels (if equipped) Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint. Do not use detergent on the wheels when they are hot, for example after driving for long distance in the hot weather. Wash detergent from the wheels immediately after use.
7-1. Maintenance and care NOTICE To prevent paint deterioration and corrosion on the body and components (aluminum wheels etc.
7-1. Maintenance and care 319 Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. Cleaning the leather areas Remove dirt and dust using a vacuum cleaner. Wipe off any excess dirt and dust with a soft cloth dampened with diluted detergent.
7-1. Maintenance and care Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible.
7-1. Maintenance and care 321 NOTICE 7 Maintenance and care Cleaning detergents Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach • Seats: Alkaline or acidic solutions, such as thinner, benzene, and alcohol Do not use polish wax or polish cleaner.
7-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance are essential. Toyota recommends the following maintenance: Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule. For full details of your maintenance schedule, refer to the “Toyota Service Booklet” or “Toyota Warranty Booklet”.
7-2. Maintenance 323 7 Maintenance and care Where to go for the maintenance service? In order to maintain your vehicle in the best possible condition, Toyota recommends that all repairs and service operations be carried out by authorized Toyota dealers or repairers or other duly qualified and equipped professionals. For repairs and services covered by your warranty, please visit an authorized Toyota dealer or repairer, who will use genuine Toyota parts in repairing any difficulties you may encounter.
7-2. Maintenance WARNING If your vehicle is not properly maintained Improper maintenance could result in serious damage to the vehicle and possible death or serious injury. Handling of the battery Battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (P.
7-3. Do-it-yourself maintenance 325 Do-it-yourself service precautions If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections. Items Parts and tools Battery condition (P. 342) • Warm water • Baking soda • Grease • Conventional wrench (for terminal clamp bolts) • Distilled water Engine coolant level (P.
7-3. Do-it-yourself maintenance WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. When working on the engine compartment Keep hands, clothing and tools away from the moving fan and engine drive belt. Be careful not to touch the engine, radiator, exhaust manifold, etc. right after driving as they may be hot.
7-3. Do-it-yourself maintenance 327 NOTICE If you remove the air cleaner filter Driving with the air cleaner filter removed may cause excessive engine wear due to dirt in the air. If the fluid level is low or high It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is high. If the reservoir needs frequent refilling, it may indicate a serious problem.
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. 1 Pull the hood lock release lever. The hood will pop up slightly. 2 Pull up the auxiliary catch lever and lift the hood. 3 Hold the hood open by inserting the supporting rod into the slot.
7-3. Do-it-yourself maintenance 329 WARNING Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. When opening the hood Make sure to use the support rod to support the hood when opening it, ensuring that the rod is fixed correctly. The hood may stay open without support on slope, however, it is dangerous because the hood may suddenly close.
7-3. Do-it-yourself maintenance Positioning a floor jack When using a floor jack, follow the instructions in the manual provided with the jack and perform the operation safely. When raising your vehicle with a floor jack, position the jack correctly. Improper placement may damage your vehicle or cause injury.
7-3. Do-it-yourself maintenance 331 NOTICE When raising your vehicle Do not jack the vehicle at the suspension. The suspension may be damaged.
7-3. Do-it-yourself maintenance Engine compartment 1KR-FE engine 1 Fuse boxes (P. 370) 5 Engine coolant reservoir (P. 340) 2 Engine oil level dipstick (P. 335) 3 Engine oil filler cap 4 Battery 6 Electric cooling fan 7 Condenser (P. 341) (P. 337) 8 Radiator (P. 341) (P. 342) 9 Washer fluid tank (P.
7-3. Do-it-yourself maintenance 333 1NR-FE engine 1 Fuse boxes (P. 370) 5 Engine coolant reservoir 2 Engine oil filler cap (P. 340) (P. 337) 3 Engine oil level dipstick 4 Battery 6 Electric cooling fan 7 Condenser (P. 341) (P. 335) 8 Radiator (P. 341) (P. 342) 9 Washer fluid tank (P.
7-3. Do-it-yourself maintenance 1ND-TV engine D 1 Fuse boxes (P. 370) 2 Engine oil filler cap 6 Intercooler (P. 341) 7 Electric cooling fan (P. 337) 3 Engine oil level dipstick (P. 335) 8 Condenser (P. 341) 9 Radiator (P. 341) 10 Engine coolant reservoir 4 Fuel filter (P. 346) (P. 340) 5 Battery (P. 342) 11 Washer fluid tank (P.
7-3. Do-it-yourself maintenance 335 Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil 1 Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine. 2 Holding a rag under the end, pull the dipstick out. 1KR-FE engine 1ND-TV engine 1NR-FE engine 7 4 Reinsert the dipstick fully.
7-3. Do-it-yourself maintenance 5 Holding a rag under the end, pull the dipstick out and check the oil level. 1 Low 2 Normal 3 Excessive Flat dipstick Non-flat dipstick The shape of the dipstick may differ depending on the type of vehicle or engine. 6 Wipe the dipstick and reinsert it fully.
7-3. Do-it-yourself maintenance 337 Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. 1KR-FE engine 1ND-TV engine 1NR-FE engine Make sure to check the oil type and prepare the items needed before adding oil. P. 474 1KR-FE engine Oil quantity (Low Full) 1.3 L (1.4 qt., 1.1 lmp.qt.) 1NR-FE and 1ND-TV engines 1.5 L (1.6 qt., 1.3 lmp.qt.
7-3. Do-it-yourself maintenance Engine oil consumption A certain amount of engine oil will be consumed while driving. In the following situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals.
7-3. Do-it-yourself maintenance 339 WARNING Used engine oil Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation and skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water. Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground.
7-3. Do-it-yourself maintenance Engine coolant The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Gasoline engine Diesel engine 1 Reservoir cap 2 “FULL” line 3 “LOW” line If the level is on or below the “LOW” line, add coolant up to the “FULL” line. (P.
7-3. Do-it-yourself maintenance 341 WARNING When the engine is hot Do not remove the radiator cap (gasoline engine), or the engine coolant reservoir cap (diesel engine). The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. NOTICE When adding coolant Coolant is neither plain water nor straight antifreeze. The correct mixture of water and antifreeze must be used to provide proper lubrication, corrosion protection and cooling.
7-3. Do-it-yourself maintenance Battery Check the battery as follows. Caution symbols The meanings of each caution symbol on the top of the battery are as follows: No smoking, no naked flames, no sparks Battery acid Shield eyes Note operating instructions Keep away from children Explosive gas Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps.
7-3. Do-it-yourself maintenance 343 Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, observe the following before recharging: If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable. Make sure the power switch on the charger is off when connecting and disconnecting the charger cables to the battery.
7-3. Do-it-yourself maintenance WARNING Where to safely charge the battery Always charge the battery in an open area. Do not charge the battery in a garage or closed room where there is insufficient ventilation. How to recharge the battery Only perform a slow charge (5 A or less). The battery may explode if charged at a quicker rate.
7-3. Do-it-yourself maintenance 345 Washer fluid If the washer fluid level is less than “FULL” line, add washer fluid to “FULL” line. WARNING When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE Do not use any fluid other than washer fluid Do not use soapy water or engine antifreeze instead of washer fluid. Doing so may cause streaking on the vehicle’s painted surfaces.
7-3. Do-it-yourself maintenance Fuel filter (diesel engine) You may drain the fuel filter yourself. However, as the operation is difficult, we recommend having it drained by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Even if you decide to drain it yourself, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The water in the fuel filter needs to be drained if the fuel filter warning light comes on.
7-3. Do-it-yourself maintenance 347 Tires Replace or rotate tires in accordance with maintenance schedules and treadwear. Checking tires 1 New tread 2 Treadwear indicator 3 Worn tread The location of treadwear indicators is shown by the “TWI” or “” marks, etc., molded on the sidewall of each tire. Check spare tire condition and pressure if not rotated. Tire rotation Rotate the tires in the order shown.
7-3. Do-it-yourself maintenance To equalize tire wear and help extend tire life, Toyota recommends that tire rotation is carried out approximately every 10000 km (6000 miles). Tire pressure warning system (if equipped) Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. If the tire pressure drops below a predetermined level, the driver is warned by a warning light. (P.
7-3. Do-it-yourself maintenance 349 How to initialize the tire pressure warning system (vehicles with a tire pressure warning system) 1 Park the vehicle in a safe place and turn the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system). Initialization cannot be performed while the vehicle is moving. 2 Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (P.
7-3. Do-it-yourself maintenance Registering ID codes (vehicles with a tire pressure warning system) The tire pressure warning valve and transmitter is equipped with a unique ID code. When replacing a tire pressure warning valve and transmitter, it is necessary to register the ID code. Have the ID code registered by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3. Do-it-yourself maintenance 351 Routine tire inflation pressure checks (vehicles with a tire pressure warning system) The tire pressure warning system does not replace routine tire inflation pressure checks. Make sure to check tire inflation pressure as part of your routine of daily vehicle checks. Initializing the tire pressure warning system (vehicles with a tire pressure warning system) Initialize the system with the tire inflation pressure adjusted to the specified level.
7-3. Do-it-yourself maintenance Certification for the tire pressure warning system The latest “DECLARATION of CONFORMITY” (DoC) is available at the following address: http://www.globaldenso.com/en/products/oem/index.
7-3.
7-3.
7-3. Do-it-yourself maintenance 355 The latest “DECLARATION of CONFORMITY” (DoC) is available at the following: DoC address: http://www.pacific-ind.co.
7-3.
7-3.
7-3. Do-it-yourself maintenance WARNING When inspecting or replacing tires Observe the following precautions to prevent accidents. Failure to do so may cause damage to parts of the drive train as well as dangerous handling characteristics, which may lead to an accident resulting in death or serious injury. Do not mix tires of different makes, models or tread patterns. Also, do not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota.
7-3. Do-it-yourself maintenance 359 NOTICE To avoid damage to the tire pressure warning valves and transmitters (vehicles with a tire pressure warning system) When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional or other qualified service shop as soon as possible.
7-3. Do-it-yourself maintenance Tire inflation pressure Make sure to maintain proper tire inflation pressure. Tire inflation pressure should be checked at least once per month. However, Toyota recommends that tire inflation pressure be checked once every two weeks. (P.
7-3. Do-it-yourself maintenance 361 WARNING Proper inflation is critical to save tire performance Keep your tires properly inflated.
7-3. Do-it-yourself maintenance Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*. Replacement wheels are available at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3. Do-it-yourself maintenance 363 When removing the wheel ornament (vehicles with steel wheels and emergency tire puncture repair kit) Remove the wheel ornament using the wheel cap clip.
7-3. Do-it-yourself maintenance WARNING Never use oil or grease on the wheel bolts or wheel nuts. Oil and grease may cause the wheel nuts to be excessively tightened, leading to bolt or disc wheel damage. In addition, the oil or grease can cause the wheel nuts to loosen and the wheel may fall off, causing an accident and resulting in death or serious injury. Remove any oil or grease from the wheel bolts or wheel nuts. Use of defective wheels prohibited Do not use cracked or deformed wheels.
7-3. Do-it-yourself maintenance 365 Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method 1 Turn the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system). 2 Open the glove box and slide off the damper. 3 Push in each side of the glove box to disconnect the upper claws. 7 connect the lower claws.
7-3. Do-it-yourself maintenance 5 Remove the filter cover. Left-hand drive vehicles Right-hand drive vehicles 6 Remove the air conditioning fil- ter and replace it with a new one. The “UP” marks shown on the filter should be pointing up. Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required.
7-3. Do-it-yourself maintenance 367 Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: Flathead screwdriver Lithium battery CR2016 (vehicles without a smart entry & start system), or CR2032 (vehicles with a smart entry & start system) Replacing the battery Vehicles without a smart entry & start system 1 Lift the cover. Insert the screw driver in the slot and push down.
7-3. Do-it-yourself maintenance 3 Remove the depleted battery. Insert a new battery with the “+” terminal facing up. Vehicles with a smart entry & start system 1 Take out the mechanical key. 2 Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a tape. 3 Remove the depleted battery. Insert a new battery with the “+” terminal facing up.
7-3. Do-it-yourself maintenance 369 Use a CR2016 (vehicles without a smart entry & start system) or CR2032 (vehicles with a smart entry & start system) lithium battery Batteries can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional, local electrical appliance shops or camera stores. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to local laws.
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1 Turn the engine switch to the “LOCK” position (vehicles without a smart entry & start system) or off (vehicles with a smart entry & start system). 2 Open the fuse box cover. Engine compartment: type A and B fuse boxes 1 Type A fuse box Push the tab in and lift the lid off.
7-3. Do-it-yourself maintenance 371 Engine compartment: type C fuse box (left-hand drive vehicles) 1 Pull the rubber strip on the edge to unhook it from the cover, and then push the tabs in and lift the cover off. 2 Remove the battery terminal cover and then the fuse box cover. Engine compartment: type C fuse box (right-hand drive vehicles) 1 Pull the rubber strip on the edge to unhook it from the cover, and then push the tabs in and lift the cover off. 7 cover and then the fuse box cover.
7-3. Do-it-yourself maintenance Instrument panel (left-hand drive vehicles) Remove the lid. Instrument panel (right-hand drive vehicles) 1 Remove the cover. Do not pull off the cover using excessive force as it is attached to the footwell light. 2 Remove the lid. 3 Remove the fuse with the pull- out tool. Only type A fuse can be removed using the pullout tool.
7-3. Do-it-yourself maintenance 373 4 Check if the fuse is blown. 1 Normal fuse 2 Blown fuse From Type A to F: Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type G: Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3. Do-it-yourself maintenance Type E Type G Type F After a fuse is replaced If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P. 376) If the replaced fuse blows again, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If there is an overload in a circuit The fuses are designed to blow, protecting the wiring harness from damage.
7-3. Do-it-yourself maintenance 375 When reinstalling the cover (type C fuse box) Left-hand drive vehicles Reinstall the cover, and then hook the rubber strip’s groove onto the cover. Right-hand drive vehicles Reinstall the cover, and then hook the rubber strip’s groove onto the cover.
7-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. As there is a danger that components may be damaged, we recommend that replacement is carried out by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3.
7-3. Do-it-yourself maintenance Replacing light bulbs Halogen headlights Reflector type 1 Unplug the connector. 2 Remove the rubber cover. 3 Release the bulb retaining spring. 4 Remove the bulb. To install a new bulb, align tabs of the bulb with the cutouts of the mounting hole.
7-3. Do-it-yourself maintenance 379 5 Set the new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. 6 Install the bulb retaining spring. 7 Install the rubber cover. Ensure the rubber cover is securely attached. 1 Fit the rubber cover outer circumference in firmly. 2 Fit 8 Install the connector. 7 Maintenance and care the rubber cover around the light bulb in until the light bulb plug can be seen.
7-3. Do-it-yourself maintenance Projector type 1 Turn the bulb base counter- clockwise. 2 Pull the bulb out while press- ing the lock release of the connector. 3 Replace the light bulb, and install the bulb base. Align the 3 tabs on the light bulb with the mounting and insert. 14 Turn and secure the bulb base. Shake the bulb base gently to check that it is not loose, turn the headlights on once and visually confirm that no light is leaking through the mounting.
7-3. Do-it-yourself maintenance 381 Front fog lights (if equipped) 1 Turn the steering wheel in the opposite direction of the light to be replaced. Turn the steering wheel to a point that allows your hand to easily fit between the tire and fender liner. 2 Remove the screw. 3 Partly remove the fender liner until the bulb is visible. 7 pressing the lock release.
7-3. Do-it-yourself maintenance 5 Turn the bulb base counter- clockwise. 6 Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. 7 Turn and secure the bulb. 8 Install the connector. Shake the bulb base gently to check that it is not loose, turn the front fog light, on once and visually confirm that no light is leaking through the mounting.
7-3. Do-it-yourself maintenance 383 9 Reinstall the fender liner. Attach the end of the fender liner to the inside of the front bumper. 10 Install the screw. Front position lights/daytime running lights (bulb type) 1 Turn the bulb base counterclockwise.
7-3. Do-it-yourself maintenance 2 Remove the light bulb. Type A Type B 3 When installing, reverse the steps listed. Front turn signal lights 1 Turn the bulb base counterclockwise. Type A Type B Type B 2 Remove the light bulb Type A 3 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance 385 Side turn signal lights 1 Depress the mirror. 2 Remove the mirror. To prevent damaging the vehicle, wrap the screwdriver with a tape. 3 Remove the bulb base. 7 Maintenance and care 4 Remove the light bulb.
7-3. Do-it-yourself maintenance 5 After installing the new bulb, secure the bulb base to the mirror body. 6 Align the tabs, and secure the mirror by pushing in each diagonally-opposite pair of tabs in order. Make sure to insert the tabs in order as shown in the illustration, and push them in until a click is heard. If you do not hear the click, do not force the tabs in. Instead, remove the mirror and check that the tabs are aligned.
7-3. Do-it-yourself maintenance 387 3 Remove the light bulb. 1 Stop/tail light 2 Rear turn signal light 4 Install the new bulb. 1 Stop/tail light 2 Rear turn signal light 5 Turn and secure the bulb base. 1 Stop/tail light 2 Rear turn signal light 7 1 Align the cover claws with the notches. 2 Press the cover until it is fixed. Maintenance and care 6 Install the cover.
7-3. Do-it-yourself maintenance License plate light 1 Remove the cover. Insert a properly sized screwdriver into the hole of the cover, and ply off the cover as shown in the illustration. To prevent damaging the vehicle, wrap the screwdriver with a tape. 2 Remove the light bulb. 3 Install the new bulb. 4 Install the cover. Insert a properly sized screwdriver into one of the holes, push the screwdriver until clicking sound is heard. Repeat for the other hole.
7-3. Do-it-yourself maintenance 389 5 Make sure that the cover is secured by pressing on the entire cover. Back-up light/rear fog light 1 Remove the clip and partly remove the cover. Pull the center section of the clip and the remove and pull out the lock. 2 Turn the bulb base counter- clockwise. 7 Maintenance and care 3 Remove the light bulb.
7-3. Do-it-yourself maintenance 4 After installing the new bulb, reinstall the clip. When installing the clip, insert the clip in and push the center of the clip. Replacing the following bulbs If any of the lights listed below has burnt out, have it replaced by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
7-3. Do-it-yourself maintenance 391 WARNING Replacing light bulbs Turn off the lights. Do not attempt to replace the bulb immediately after turning off the lights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands. When it is unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid getting moisture and oils on the bulb. Also, if the bulb is scratched or dropped, it may blow out or crack.
7-3.
When trouble arises 8-1. Essential information Emergency flashers...........394 If your vehicle has to be stopped in an emergency..................395 8-2. Steps to take in an emergency If your vehicle needs to be towed ..........................397 If you think something is wrong...............................403 Fuel pump shut off system (gasoline engine only) .....404 If a warning light turns on or a warning buzzer sounds .............................
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. Emergency flashers If the emergency flashers are used for a long time while the engine is not operating, the battery may discharge.
8-1. Essential information 395 If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: 1 Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle. 2 Shift the shift lever to N.
8-1. Essential information 4 Vehicles with a smart entry & start system: To stop the engine, press and hold the engine switch for 3 consecutive seconds or more, or press it briefly 3 times or more in succession. Press and hold for 3 seconds or more, or press briefly 3 times or more 5 Stop the vehicle in a safe place by the road.
8-2. Steps to take in an emergency 397 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional such as a commercial towing service, using a lift-type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws.
8-2. Steps to take in an emergency Towing with a wheel-lift type truck From the front Release the parking brake. Using a flatbed truck If your Toyota is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. After transporting, return the covers that were attached to the rear side. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45. Do not overly tighten the tie downs or the vehicle may be damaged.
8-2. Steps to take in an emergency 399 Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelet. This should only be attempted on hard surfaced roads for 80 km (50 miles) at low speeds. A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drive train, axles, steering and brakes must be in good condition. Emergency towing procedure 1 Take out the towing eyelet. (P.
8-2. Steps to take in an emergency 4 Tighten down the towing eyelet securely using a wheel nut wrench* or hard metal bar. *: If a wheel nut wrench is not equipped, a wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. 5 Securely attach a cable or chain to the towing eyelet. Take care not to damage the vehicle body. 6 Vehicles without a smart entry & start system: Enter the vehicle being towed and start the engine.
8-2. Steps to take in an emergency 401 WARNING Observe the following precautions. Failure to do so may result in death or serious injury. When towing the vehicle Be sure to transport the vehicle with the front wheels raised or with all four wheels raised off the ground. If the vehicle is towed with the front wheels contacting the ground, the drivetrain and related parts may be damaged. While towing When towing using a rope, avoid sudden starts, etc.
8-2. Steps to take in an emergency NOTICE To prevent damage to the vehicle when towing using a wheel-lift type truck When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed. To prevent body damage when towing with a sling-type truck Do not tow with a sling-type truck, either from the front or rear.
8-2. Steps to take in an emergency 403 If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible.
8-2. Steps to take in an emergency Fuel pump shut off system (gasoline engine only) To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated. Vehicles without a smart entry & start system 1 Turn the engine switch to the “ACC” or “LOCK” position. 2 Restart the engine.
8-2. Steps to take in an emergency 405 If a warning light turns on or a warning buzzer sounds Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency Warning light (Red warning light flashes or comes on) Warning light/Details/Actions High engine coolant temperature warning light Indicates that the engine is overheating. As the coolant temperature rises, it changes from flashing to steady on. P.
8-2. Steps to take in an emergency Warning light 407 Warning light/Details/Actions Slip indicator light (if equipped) Indicates a malfunction in: • The VSC system; • The TRC system. Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately. (Yellow) (Yellow) (Flashes) Cruise control indicator light (if equipped) Indicates a malfunction in the cruise control system. P.
8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Low fuel level warning light Gasoline engine: Indicates that remaining fuel is about 5.8 L (1.5 gal., 1.3 Imp.gal.) or less. Diesel engine: Indicates that remaining fuel is about 6.4 L (1.7 gal., 1.4 Imp.gal.) or less. Refuel the vehicle. Driver’s and front passenger’s seat belt reminder light (warning buzzer)*3 Warns the driver and front passenger to fasten their seat belts. Fasten the seat belt.
8-2. Steps to take in an emergency Warning light 409 Warning light/Details/Actions Low engine oil level warning light (diesel engine only) Indicates that engine oil level is low. Check the level of engine oil, and add if necessary. DPF system warning light (diesel engine with a DPF system) • Indicates that the DPF catalytic converter needs to be cleaned due to repeated short trips and/or low-speed driving.
8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Engine oil change reminder light (diesel engine only) When the light flashes: Indicates that the engine oil is scheduled to be changed. • Vehicles without a DPF system*5: Flashes approximately 35000 km (22000 miles) after the engine oil is changed. (The indicator will not work properly unless the oil maintenance data has been reset).
8-2. Steps to take in an emergency 411 *3: Driver’s and passenger’s seat belt buzzer: The driver’s and passenger’s seat belt buzzer sounds to alert the driver and passenger that his or her seat belt is not fastened. The buzzer sounds for 30 seconds after the vehicle reaches a speed of at least 20 km/h (12 mph). Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 90 more seconds.
8-2. Steps to take in an emergency If the engine oil change reminder light flashes (diesel engine with a DPF system) Repeated short trips and/or low-speed driving may cause the oil to degrade sooner than usual, regardless of the actual distance driven. If this happens, the engine oil change reminder light will flash.
8-2. Steps to take in an emergency 413 8 When trouble arises The tire pressure warning light may come on due to natural causes (vehicles with a tire pressure warning system) The tire pressure warning light may come on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes).
8-2. Steps to take in an emergency WARNING When the electric power steering system warning light comes on The steering wheel may become extremely heavy. If the steering wheel becomes heavier than usual when operating, hold firmly and operate using more force than usual. When driving to clean the DPF catalytic converter When driving, pay sufficient attention to weather, road conditions, terrain and traffic conditions, and be sure to observe traffic laws and/or regulations.
8-2. Steps to take in an emergency 415 NOTICE If the fuel filter warning light comes on (diesel engine only) Never drive the vehicle with the warning light on. Continued driving with water accumulated in the fuel filter will damage the fuel injection pump. When the DPF system warning light comes on (diesel engine with a DPF system) If the DPF system warning light is left on without performing cleaning, after an additional 100 to 300 km (62 to 187 miles), the malfunction indicator lamp may come on.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning light 3 times (Flashes in yellow) Once 3 times (Flashes in yellow) Once Continuous (5 seconds) (Flashes in yellow) Warning light/Details/Actions Smart entry & start system indicator light Vehicles with a Multidrive: The electronic key was carried outside the vehicle and the driver’s door was opened and closed while the shift position P was selected without turning off the engine switch.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning light (Flashes in yellow for 15 seconds.) 9 times (Flashes in yellow) Once Once Once 417 Warning light/Details/Actions Smart entry & start system indicator light Indicates that the electronic key is not present when attempting to start the engine. Confirm the location of the electronic key. Smart entry & start system indicator light An attempt was made to drive when the regular key was not inside the vehicle.
8-2. Steps to take in an emergency If you have a flat tire (vehicles with a spare tire) Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 347 WARNING If you have a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair, which could result in an accident. Before jacking up the vehicle Stop the vehicle on a hard, flat surface.
8-2.
8-2. Steps to take in an emergency WARNING Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. Only use the tire jack that comes with this vehicle for replacing a flat tire.
8-2. Steps to take in an emergency 421 Taking out the jack 1 Move the front left seat to the front most position and remove the cover. 2 Take out the jack.
8-2. Steps to take in an emergency Taking out the spare tire Vehicles with a compact spare tire 1 Vehicles with a deck board: Lift the deck board and pull it toward you to remove it. (P. 307) 2 Remove the luggage floor cover. 3 Remove the spare wheel cush- ion, then loosen the center fastener. Vehicles with a full-size spare tire 1 Lift the deck board and pull it toward you to remove it. (P. 307) 2 Remove the spare wheel cush- ion, then loosen the center fastener.
8-2. Steps to take in an emergency 423 Replacing a flat tire 1 Chock the tires. Flat tire Front Rear Wheel chock positions Left-hand side Behind the rear right-hand side tire Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Right-hand side In front of the front left-hand side tire 2 For vehicles with steel wheels, remove the wheel ornament using the wrench.
8-2. Steps to take in an emergency 4 Turn the tire jack portion by hand until the notch of the jack is in contact with the jack point. The jack point guides are located under the rocker panel. They indicate the jack point positions. 5 Raise the vehicle until the tire is slightly raised off the ground. 6 Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
8-2. Steps to take in an emergency 425 WARNING Replacing a flat tire Observe the following precautions. Failure to do so may result in serious injury: • Do not try to remove the wheel ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. • Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven. After the vehicle has been driven the disc wheels and the area around the brakes will be extremely hot.
8-2. Steps to take in an emergency Installing the spare tire 1 Remove any dirt or foreign mat- ter from the wheel contact surface. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, causing the tire to come off. 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.
8-2. Steps to take in an emergency 427 3 Lower the vehicle. 4 Firmly tighten each wheel nut two or three times in the order shown in the illustration. Tightening torque: 103 N·m (10.5 kgf·m, 76 ft·lbf) Do not use other tools or any additional leverage other than your hands, such as a hammer, pipe or your foot. Vehicles with steel wheels (except compact spare tire) 5 Reinstall the wheel ornament. Align the cutout of the wheel ornament with the valve stem as shown.
8-2. Steps to take in an emergency The compact spare tire The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily, and only in an emergency. Make sure to check the tire inflation pressure of the compact spare tire. (P. 483) After completing the tire change (vehicles with a tire pressure warning system) The tire pressure warning system must be reset. (P.
8-2.
8-2.
8-2. Steps to take in an emergency 431 WARNING 8 When trouble arises When using the full-size spare tire Replace the full-size spare tire with a standard tire as soon as possible. Avoid sudden acceleration, abrupt steering, sudden braking and shifting operations that cause sudden engine braking. When using the compact spare tire Remember that the compact spare tire provided is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle.
8-2. Steps to take in an emergency NOTICE Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. Be careful when driving over bumps with the compact spare tire installed on the vehicle The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces.
8-2. Steps to take in an emergency 433 If you have a flat tire (vehicles with an emergency tire puncture repair kit) Your vehicle is not equipped with a spare tire, but instead is equipped with an emergency tire puncture repair kit. A puncture caused by a nail or screw passing through the tire tread can be repaired temporarily using the emergency tire puncture repair kit. (The kit contains a bottle of sealant.
8-2. Steps to take in an emergency Location of the emergency tire puncture repair kit 1 Wheel cap clip (if equipped) 4 Wheel nut wrench* 2 Towing eyelet 5 Emergency 3 Jack handle* repair kit tire puncture *: Use of the jack, jack handle and wheel nut wrench. (if equipped) (P. 419) A jack, jack handle and wheel nut wrench can be purchased at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2.
8-2. Steps to take in an emergency Before performing emergency repair Check the degree of the tire damage. • Do not remove the nail or screw from the tire. Removing the object may widen the opening and prevent emergency repair with the repair kit. • To avoid sealant leakage, move the vehicle until the area of the puncture, if known, is positioned at the top of the tire. In the following cases, the tire cannot be repaired with the emergency tire puncture repair kit.
8-2. Steps to take in an emergency 437 Taking out the emergency tire puncture repair kit 1 Vehicles with a deck board: Lift the deck board and pull it toward you to remove it. (P. 307) 2 Remove the luggage floor cover. 3 Take out the emergency tire puncture repair kit. Emergency repair method 1 Take out the repair kit from the tool box. When taking out the bottle from the original bag, do not tear or discard the bag. 2 Remove the valve cap from the valve of the punctured tire.
8-2. Steps to take in an emergency 3 Remove the cap from the bot- tle. 4 Connect the nozzle to the valve. Screw the end of the nozzle clockwise as far as possible. The bottle should hang vertically without contacting the ground. If the bottle does not hang vertically, move the vehicle so that the tire valve is located properly. 5 Make sure that the compressor switch is off. 6 Remove the power plug from the compressor.
8-2. Steps to take in an emergency 439 7 Pull the hose out from the com- pressor. 8 Connect the power plug to the power outlet socket or cigarette lighter socket. (P. 311, 312) 9 Attach the 2 stickers as shown. Remove any dirt and moisture from the wheel before attaching the label.
8-2. Steps to take in an emergency 10 Connect the bottle to the com- pressor. Screw the end of the hose clockwise as far as possible. 11 Check the specified tire inflation pressure. Tire inflation pressure is specified on the label in the glove box. (P. 483) 12 Start the engine. 13 To inject the sealant and inflate the tire, turn the compressor switch on.
8-2. Steps to take in an emergency 441 14 Inflate the tire until the specified air pressure is reached. 1 The sealant will be injected and the pressure will surge and then gradually decrease. 2 The air pressure gauge will display the actual tire inflation pressure about 1 minute (5 minutes at low temperature) after the switch is turned on. 3 Inflate the tire until the speci- fied air pressure.
8-2. Steps to take in an emergency 17 Disconnect the hose from the bottle and attach the cap to the bottle. Place the bottle in the original bag and zip it. Temporarily store the bottle and compressor in the luggage compartment. To spread the liquid sealant evenly within the tire, immediately drive safely for about 5 km (3 miles) below 80 km/h (50 mph). After driving for about 5 km (3 miles), stop your vehicle in a safe place on a hard, flat surface and connect the compressor.
8-2. Steps to take in an emergency 443 2 If the tire inflation pressure is 130 kPa (1.3 kgf/cm2 or bar, 19 psi) or higher, but less than the specified air pressure: Proceed to . 3 If the tire inflation pressure is the specified air pressure (P. 483): Proceed to . Turn the compressor switch on to inflate the tire until the specified air pressure is reached. Drive for about 5 km (3 miles) and then perform . Store the compressor in the luggage compartment.
8-2. Steps to take in an emergency Note for checking the emergency tire puncture repair kit Check the sealant expiry date occasionally. The expiry date is shown on the bottle. Do not use sealant whose expiry date has already passed. Otherwise, repairs conducted using the emergency tire puncture repair kit may not be performed properly. Emergency tire puncture repair kit The sealant stored in the emergency tire puncture repair kit can be used only once to temporarily repair a single tire.
8-2. Steps to take in an emergency 445 WARNING 8 When trouble arises Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. Driving with a flat tire may cause a circumferential groove on the side wall. In such a case, the tire may explode when using a repair kit. Caution while driving Store the repair kit in the luggage room.
8-2. Steps to take in an emergency WARNING Connect the valve and hose securely with the tire installed on the vehicle. If the hose is not properly connected to the valve, air leakage may occur as sealant may be sprayed out. If the hose comes off the valve while inflating the tire, there is a risk that the hose will move abruptly due to air pressure. After inflation of the tire has completed, the sealant may splatter when the hose is disconnected or some air is let out of the tire.
8-2. Steps to take in an emergency 447 NOTICE When performing an emergency repair A tire should only be repaired with the emergency tire puncture repair kit if the damage is caused by a sharp object such as nail or screw passing through the tire tread. Do not remove the sharp object from the tire. Removing the object may widen the opening and disenable emergency repair with the repair kit. The repair kit is not waterproof.
8-2. Steps to take in an emergency If the engine will not start If the engine will not start even though correct starting procedures are being followed (P. 182, 185), consider each of the following points: The engine will not start even though the starter motor operates normally. One of the following may be the cause of the problem: There may not be sufficient fuel in the vehicle’s tank. Gasoline engine: Refuel the vehicle. Diesel engine: P. 462 The engine may be flooded.
8-2. Steps to take in an emergency 449 The starter motor does not turn over, the interior lights and headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem: One or both of the battery terminals may be disconnected. The battery may be discharged. (P. 453) There may be a malfunction in the steering lock system (vehicles with a smart entry & start system).
8-2. Steps to take in an emergency If the shift lever cannot be shifted from P (vehicles with a Multidrive) If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional immediately.
8-2. Steps to take in an emergency 451 If the electronic key does not operate properly (vehicles with a smart entry & start system) If communication between the electronic key and vehicle is interrupted (P. 130) or the electronic key cannot be used because the battery is depleted, the smart entry & start system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below.
8-2. Steps to take in an emergency 2 Touch the Toyota emblem side of the electronic key to the engine switch. The engine switch will turn to IGNITION ON mode. When the smart entry & start system is deactivated in customization setting, the engine switch will turn to ACCESSORY mode. 3 Firmly depress the brake pedal (Multidrive) or clutch pedal (manual transmission) and check that (green) turns on. 4 Press the engine switch.
8-2. Steps to take in an emergency 453 If the vehicle battery is discharged The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below. 1 Open the hood. (P.
8-2. Steps to take in an emergency 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency 455 1ND-TV engine 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency 6 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order from which they were connected. Once the engine starts, have the vehicle inspected at any authorized Toyota dealer or repairer, or another duly qualified and equipped professional as soon as possible. Starting the engine when the battery is discharged (vehicles with a Multidrive) The engine cannot be started by push-starting.
8-2. Steps to take in an emergency 457 WARNING Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery: Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with anything other than the intended terminal. Do not allow the + and - clamps of the jumper cables to come into contact with each other.
8-2. Steps to take in an emergency If your vehicle overheats The following may indicate that your vehicle is overheating: The high engine coolant temperature warning light (P. 406) comes on or flashes, or a loss of engine power is experienced. (For example, the vehicle speed does not increase.) Steam comes out from under the hood. Correction procedures 1 Stop the vehicle in a safe place and turn off the air conditioning sys- tem, and then stop the engine.
8-2. Steps to take in an emergency 459 4 The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir. Gasoline engine Diesel engine 1 Reservoir 1 Reservoir 2 “FULL” 2 “FULL” 3 “LOW” 3 “LOW” 5 Add coolant if necessary. Water can be used in an emergency if coolant is unavailable.
8-2. Steps to take in an emergency 6 Start the engine and turn the air conditioning system on to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. The fan operates when the air conditioning system is turned on immediately after a cold start. Confirm that the fan is operating by checking the fan sound and air flow. If it is difficult to check these, turn the air conditioning system on and off repeatedly.
8-2. Steps to take in an emergency 461 WARNING To prevent an accident or injury when inspecting under the hood of your vehicle Observe the following precautions. Failure to do so may result in serious injury such as burns. If steam is seen coming from under the hood, do not open the hood until the steam has subsided. The engine compartment may be very hot. Keep hands and clothing (especially a tie, a scarf or a muffler) away from the fan and belts while the engine is operating.
8-2. Steps to take in an emergency If you run out of fuel and the engine stalls (diesel engine only) If you run out of fuel and the engine stalls 1 Refuel your vehicle. 2 Pull the rubber strip on the edge to unhook it from the cover, and then push the tabs in and lift the cover off. Left-hand drive vehicles 3 To bleed the fuel system, oper- ate the priming pump until you feel more resistance.
8-2. Steps to take in an emergency 463 4 Reinstall the cover, and then hook the rubber strip’s groove onto the cover. Left-hand drive vehicles Right-hand drive vehicles 5 Start the engine. (P. 182, 185) If the engine does not start after the above steps have been performed, wait for 10 seconds and then try steps 3 and 5 again. If the engine still does not start, contact any authorized Toyota dealer or repairer, or another duly qualified and equipped professional.
8-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: 1 Stop the engine. Set the parking brake and shift the shift lever to P (Multidrive) or N (manual transmission). 2 Remove the mud, snow or sand from around the front wheels. 3 Place wood, stones or some other material under the front wheels to help provide traction. 4 Restart the engine.
8-2. Steps to take in an emergency 465 WARNING When attempting to free a stuck vehicle If you choose to push the vehicle back and forth to free it, make sure the surrounding area is clear to avoid striking other vehicles, objects or people. The vehicle may also lunge forward or lunge back suddenly as it becomes free. Use extreme caution. When shifting the shift lever Be careful not to shift the shift lever with the accelerator pedal depressed.
8-2.
Vehicle specifications 9 9-1. Specifications Maintenance data (fuel, oil level, etc.)...........468 Fuel information .................487 9-2. Customization Customizable features .......489 9-3. Items to initialize Items to initialize ................
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions and weights Overall length 3950 mm (155.5 in.) Overall width 1695 mm (66.7 in.) Overall height*1 1510 mm (59.4 in.) 1520 mm (59.8 in.)*2 1530 mm (60.2 in.)*3 Wheelbase 2510 mm (98.8 in.) Front 1485 mm (58.5 in.)*4 1470 mm (57.9 in.)*5 1460 mm (57.5 in.)*6 Rear 1470 mm (57.9 in.)*4 1460 mm (57.5 in.)*5 1445 mm (56.9 in.)*6 1KR-FE engine 1450 kg (3197 lb.
9-1. Specifications 469 1KR-FE engine 730 kg (1609 lb.) Towing capacity with brake 1NR-FE engine 880 kg (1940 lb.) 1ND-TV engine 780 kg (1719 lb.) without brake 550 kg (1212 lb.) Maximum permissible mass for tow19 kg (41 lb.
9-1. Specifications Vehicle identification Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped under the front right seat. This number is also on the manufacturer’s label on the lefthand side of the center pillar.
9-1. Specifications 471 Engine number The engine number is stamped on the engine block as shown. 1KR-FE engine 1ND-TV engine 1NR-FE engine Engine Gasoline engine 1KR-FE engine Model 1KR-FE Type 3-cylinder in line, 4-cycle, gasoline Bore and stroke 71.0 84.0 mm (2.79 3.30 in.) 9 3 998 cm (60.9 cu.in.) Valve clearance (engine cold) Intake: 0.145 — 0.235 mm (0.006 — 0.009 in.) Exhaust: 0.275 — 0.365 mm (0.011 — 0.014 in.
9-1. Specifications 1NR-FE engine Model 1NR-FE Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 72.5 80.5 mm (2.85 3.17 in.) Displacement 1329 cm3 (81.1 cu.in.) Valve clearance (engine cold) Automatic adjustment Drive belt tension Automatic adjustment Diesel engine 1ND-TV engine Model 1ND-TV Type 4-cylinder in line, 4-cycle, diesel Bore and stroke 73.0 81.5 mm (2.87 3.21 in.) Displacement 1364 cm3 (83.2 cu.in.) Valve clearance (engine cold) Intake: 0.
9-1. Specifications 473 Fuel Gasoline engine Fuel type EU area: Unleaded gasoline conforming to European standard EN228 only Except EU area: Unleaded gasoline only Research Octane Number 95 or higher Fuel tank capacity (Reference) 42 L (11.1 gal., 9.2 Imp.gal.) Diesel engine Fuel type EU area: Diesel fuel conforming to European standard EN590 Except EU area: Diesel fuel that contains 50 ppm or less of sulfur Cetane number 48 or higher Fuel tank capacity (Reference) 42 L (11.1 gal., 9.
9-1. Specifications Lubrication system (gasoline engine) Oil capacity (Drain and refill — reference*) With filter 1KR-FE engine 2.8 L (3.0 qt., 2.5 Imp.qt.) 1NR-FE engine 3.4 L (3.6 qt., 3.0 Imp.qt.) Without filter 1KR-FE engine 2.6 L (2.7 qt., 2.3 Imp.qt.) 1NR-FE engine 3.2 L (3.4 qt., 2.8 Imp.qt.) *: The engine oil capacity is a reference quantity to be used when changing the engine oil.
9-1. Specifications 475 Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used.
9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. • The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature.
9-1. Specifications 477 Engine oil selection Vehicles without a DPF system* “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used. Oil grade: ACEA C2, B1, API CF-4 or CF Recommended viscosity (SAE): SAE 0W-30 is filled into your Toyota vehicle at manufacturing, and the best choice for good fuel economy and good starting in cold weather.
9-1. Specifications Vehicles with a DPF system* “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota recommends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of matching quality can also be used. Oil grade: ACEA C2 NOTICE Using engine oil other than ACEA C2 may damage the catalytic converter. Recommended viscosity (SAE): SAE 0W-30 is filled into your Toyota vehicle at manufacturing, and the best choice for good fuel economy and good starting in cold weather.
9-1. Specifications 479 Cooling system Gasoline engine 1KR-FE engine Capacity (Reference) 4.5 L (4.8 qt., 4.0 Imp.qt.) Multidrive 1NR-FE engine 4.8 L (5.1 qt., 4.2 Imp.qt.) Manual transmission 4.6 L (4.9 qt., 4.0 Imp.qt.) Coolant type Use either of the following: • “Toyota Super Long Life Coolant” • A similar high-quality ethylene glycol-based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
9-1. Specifications Ignition system (gasoline engine only) Spark plug Make 1KR-FE engine DENSO SC16HR11 1NR-FE engine DENSO SC20HR11 Gap 1.1 mm (0.043 in.) NOTICE Iridium-tipped spark plugs Use only iridium-tipped spark plugs. Do not adjust the spark plug gap. Electrical system Battery Open voltage* at 20C (68F): Charging rates 12.6 — 12.8 V Fully charged 12.2 — 12.4 V Half charged 11.8 — 12.
9-1. Specifications 481 NOTICE Multidrive fluid type Using Multidrive fluid other than “Toyota Genuine CVT Fluid FE” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the transmission of your vehicle. Manual transmission 1KR-FE engine Gear oil capacity (Reference) 1.7 L (1.8 qt., 1.5 Imp.qt.) 1NR-FE and 1ND-TV engines 2.4 L (2.5 qt., 2.1 Imp.qt.
9-1. Specifications Brakes Rear drum brake Lefthand drive vehicles Gasoline engines 83 mm (3.27 in.) Min. Rear disk brake 79 mm (3.11 in.) Min. Rear drum brake Diesel engines 81 mm (3.19 in.) Min. Rear disk brake 78 mm (3.07 in.) Min. Pedal clearance*1 Rear drum brake Righthand drive vehicles Gasoline engines 76 mm (2.99 in.) Min. Rear disk brake 74 mm (2.91 in.) Min. Rear drum brake Diesel engines 75 mm (2.95 in.) Min. Rear disk brake 73 mm (2.87 in.) Min.
9-1. Specifications 483 Tires and wheels 14-inch tires (Type A) Tire size 175/65R14 82T Tire inflation pressure (Recommended cold 220 kPa (2.2 kgf/cm2 or bar, 32 psi) tire inflation pressure) Wheel size 14 5J Wheel nut torque 103 N·m (10.5 kgf·m, 76 ft·lbf) 14-inch tires (Type B) Tire size 175/70R14 84S Front wheel Rear wheel Tire inflation pressure 2 or bar, psi) kPa (kgf/cm kPa (kgf/cm2 or bar, psi) (Recommended cold tire inflation pressure) 250 (2.5, 36) 240 (2.
9-1. Specifications 15-inch tires (Type B) Tire size 185/60R15 84H Vehicle speed Tire inflation pressure 160 km/h (Recommended cold (99 mph) or tire inflation pressure) less More than 160 km/h (99 mph) Front wheel Rear wheel kPa (kgf/cm2 kPa (kgf/cm2 or bar, psi) or bar, psi) 220 (2.2, 32) 220 (2.2, 32) 240 (2.4, 35) 220 (2.2, 32) Wheel size 15 5 1/2J Wheel nut torque 103 N·m (10.
9-1. Specifications 485 Compact spare tires Tire size T125/70D15 95M Tire inflation pressure (Recommended cold 420 kPa (4.2 kgf/cm2 or bar, 60 psi) tire inflation pressure) Wheel size 15 4T Wheel nut torque 103 N·m (10.5 kgf·m, 76 ft·lbf) Tire size T125/70D16 96M Tire inflation pressure (Recommended cold 420 kPa (4.2 kgf/cm2 or bar, 60 psi) tire inflation pressure) Wheel size 16 4T Wheel nut torque 103 N·m (10.5 kgf·m, 76 ft·lbf) When towing a trailer Add 20.0 kPa (0.
9-1.
9-1. Specifications 487 Fuel information Gasoline engine EU area: Your vehicle must use only unleaded gasoline conforming to European standard EN228. For optimum engine performance, select unleaded gasoline with a Research Octane Number of 95 or higher. Except EU area: Your vehicle must use only unleaded gasoline. For optimum engine performance, select unleaded gasoline with a Research Octane Number of 95 or higher.
9-1. Specifications NOTICE Notice on fuel quality (gasoline engine) Do not use improper fuels. If improper fuels are used, the engine will be damaged. Do not use leaded gasoline. Leaded gasoline will cause the three-way catalytic converter to lose its effectiveness and the emission control system to function improperly. EU area: Bioethanol fuel sold under names such as “E50” or “E85” and fuel containing a large amount of ethanol should not be used.
9-2. Customization 489 Customizable features Your vehicle includes a variety of electronic features that can be personalized to suit your preferences. Programming these preferences requires specialized equipment and may be performed by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. Customizable features Some function settings are changed simultaneously with other functions being customized.
9-2. Customization Smart entry & start system (P.
9-2. Customization Automatic light control system (P. 202) Function Default setting Customized setting 1 2 Light sensor sensitivity Level 3 Level 1 to 5 O O Default setting Customized setting 1 2 — O 1 2 — O Lights (P. 202) Function 60 seconds Time that the low beam headlights are on when the vehicle is parked 30 seconds 90 seconds 120 seconds Illumination (P.
9-2. Customization WARNING During customization As the engine needs to be running during customization, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard. NOTICE During customization To prevent battery discharge, ensure that the engine is running while customizing features.
9-3. Items to initialize 493 Items to initialize The following item must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference Engine oil mainteAfter changing engine oil nance data*1 P.
9-3.
Index What to do if... (Troubleshooting) .....................496 Alphabetical index ......................500 For vehicles with a Navigation/Multimedia system, refer to the “Navigation and multimedia system Owner’s Manual” for information regarding the equipment listed below.
What to do if... (Troubleshooting) What to do if... (Troubleshooting) If you have a problem, check the following before contacting any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. The doors cannot be locked, unlocked, opened or closed You lose your keys If you lose your keys, new genuine keys can be made by any authorized Toyota dealer or repairer, or another duly qualified and equipped professional. (P.
What to do if... (Troubleshooting) 497 If you think something is wrong The engine does not start (vehicles without a smart entry & start system) Vehicles with a Multidrive: Is the shift lever in P? (P. 182) Vehicles with a manual transmission: Did you turn the key while firmly depressing the clutch pedal? (P. 182) Is the battery discharged? (P.
What to do if... (Troubleshooting) The shift lever cannot be shifted from P even if you depress the brake pedal (vehicles with a Multidrive) Vehicles without a smart entry & start system: Is the engine switch in the “ON” position? If you cannot release the shift lever by depressing the brake pedal with the engine switch in the “ON” position. (P.
What to do if... (Troubleshooting) 499 A warning buzzer sounds during driving The seat belt reminder light is flashing Is the driver wearing the seat belts? (P. 408) The parking brake indicator is on Is the parking brake released? (P. 405) Depending on the situation, other types of warning buzzer may also sound. (P. 405) A warning light turns on When a warning light turns on, refer to P. 405.
Alphabetical index Alphabetical index A A/C..................................... 280, 287 Air conditioning filter.............. 365 Automatic air conditioning system ................................ 287 Manual air conditioning system ................................ 280 ABS (Anti-lock Brake System) .................................. 235 Function ................................ 235 Warning light ......................... 406 Air conditioning filter .............. 365 Air conditioning system ..........
Alphabetical index Automatic air conditioning system .................................... 287 Air conditioning filter.............. 365 Automatic air conditioning system ................................ 287 Automatic light control system .................................... 205 Auxiliary boxes ........................ 308 B Back door Back door.............................. 121 Luggage compartment light ..................................... 123 Back-up lights Replacing light bulb...............
Alphabetical index Child-protectors.......................119 Cigarette lighter .......................311 Cleaning............................ 316, 319 Aluminum wheels.................. 317 Exterior.................................. 316 Interior................................... 319 Seat belts .............................. 320 Clock ........................................... 93 Clutch........................................ 481 Condenser ................................ 341 Coolant ...............
Alphabetical index E Eco Driving Indicator Light..... 164 Electric Power Steering (EPS)....................................... 235 Function ................................ 235 Warning light ......................... 406 Electronic key .......................... 102 Battery-saving function ......... 129 If the electronic key does not operate properly ................. 451 Replacing the battery ............ 367 Emergency brake signal ......... 235 Emergency flashers.................
Alphabetical index Engine oil maintenance data ......................................... 338 Engine switch (ignition switch)............. 182, 185 Engine switch light (ignition switch light) ............ 299 EPS (Electric Power Steering)................................. 235 Function ................................ 235 Warning light ......................... 406 F Flat tire.............................. 418, 433 Floor mats .................................. 26 Fluid Brake.............................
Alphabetical index H Hands-free system (for cellular phone)* Hazard lights Switch ................................... 394 Head restraints......................... 144 Headlights ................................ 202 Follow me home system ....... 203 Light switch ........................... 202 Replacing light bulbs............. 378 Wattage................................. 486 Heaters.............................. 280, 287 Automatic air conditioning system ................................
Alphabetical index J Jack Positioning a floor jack .......... 330 Vehicle-equipped jack........... 419 Jack handle ...................... 419, 434 Jam protection function Power window.......................155 K Keyless entry Smart entry & start system.... 127 Wireless remote control ........ 103 Keys .......................................... 102 Battery-saving function ......... 129 Electronic key........................ 102 Engine switch................
Alphabetical index M Maintenance Do-it-yourself maintenance ... 325 Maintenance data ................. 468 Maintenance requirements ... 322 Malfunction indicator lamp ..... 406 Manual headlight leveling dial .......................................... 204 Manual transmission ............... 196 Oil.......................................... 481 Meter ........................................... 88 Indicators ................................ 85 Instrument panel light control...................................
Alphabetical index R Radiator .................................... 341 Radio......................................... 252 Radio data system ................... 254 RDS ........................................... 254 Rear fog light............................ 208 Replacing light bulbs............. 389 Switch ................................... 208 Wattage................................. 486 Rear passengers’ seat belt reminder light ........................ 408 Rear seat................................
Alphabetical index Side airbags ............................... 37 Side doors ................................ 114 Side mirrors.............................. 151 Adjusting and folding............. 151 Heaters ......................... 283, 291 Side turn signal lights ............. 200 Replacing light bulbs............. 385 Turn signal lever ................... 200 Wattage................................. 486 Smart entry & start system ..... 127 Antenna location ................... 127 Entry functions .....
Alphabetical index T Tachometer ................................ 88 Tail lights .................................. 202 Light switch ........................... 202 Replacing light bulbs..... 386, 390 Wattage................................. 486 Talk switch* Telephone switch* Theft deterrent system Double locking system ............ 79 Engine immobilizer system ..... 74 Tire inflation pressure ............. 360 Maintenance data ................. 483 Warning light .........................
Alphabetical index W Warning buzzers Brake system ........................ 405 Electric power steering.......... 406 Key reminder......................... 184 Open door ............................. 407 Seat belt reminder................. 408 Smart entry & start system.... 128 Warning lights............................ 83 ABS....................................... 406 Brake system ........................ 405 Charging system ................... 405 Cruise control indicator .........
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 328 P. 218 Hood lock release lever Fuel filler door opener Tire inflation pressure P. 328 P. 218 P. 483 Fuel tank capacity (Reference) Fuel type Cold tire inflation pressure 42 L (11.1 gal., 9.2 Imp.gal.) P. 216, 473 P. 483 Engine oil capacity (Drain and refill — reference) P. 474, 476 Engine oil type P.
