Operation Manual

185

4-2. Driving procedures

Driving

Engine (ignition) switch (vehicles with a

smart entry & start system)

Check that the parking brake is set.

Check that the shift lever is set in P (Multidrive) or N (manual trans-

mission).

Firmly depress the brake pedal (Multidrive) or clutch pedal (manual

transmission).

The smart entry & start system indicator light (green) will turn on.

If the indicator light does not turn on, the engine cannot be started.

Press the engine switch.

The engine will crank until it starts

or for up to 30 seconds, whichever

is less.

Continue depressing the brake

pedal (Multidrive) or clutch pedal

(manual transmission) until the

engine is completely started.

Diesel engine only: The

indicator turns on. The engine will

start after the indicator light goes

out.

The engine can be started from

any engine switch mode.

Performing the following operations when carrying the elec-

tronic key on your person starts the engine or changes engine

switch mode.

Starting the engine