Operation Manual

186

4-2. Driving procedures

Stop the vehicle.

Shift the shift lever to P (Multidrive) or N (manual transmission).

Set the parking brake. (P. 201)

Press the engine switch.

Release the brake pedal (Multidrive) or clutch pedal (manual trans-

mission) and check that the smart entry & start system indicator

light (green) is off.

Modes can be changed by pressing the engine switch with brake

pedal (Multidrive) or clutch pedal (manual transmission) released.

(The mode changes each time the switch is pressed.)

Off

The emergency flashers can be

used.

The smart entry & start system

indicator light (green) is off.

ACCESSORY mode

Some electrical components such

as the audio system can be used.

The smart entry & start system

indicator light (green) flashes

slowly.

IGNITION ON mode

All electrical components can be

used.

The smart entry & start system

indicator light (green) flashes

slowly.

*: Vehicles with a Multidrive: If the shift lever is in a position other than P

when turning off the engine, the engine switch will be turned to ACCES-

SORY mode, not to off.

Stopping the engine

Changing engine switch modes