Operation Manual

374
7-3. Do-it-yourself maintenance
 After a fuse is replaced
 If the lights do not turn on even after the fuse has been replaced, a bulb may
need replacement. (P. 376)
 If the replaced fuse blows again, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped pro-
fessional.
 If there is an overload in a circuit
The fuses are designed to blow, protecting the wiring harness from damage.
 When replacing light bulbs
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
 Type E  Type F
 Type G