Operation Manual

443

8-2. Steps to take in an emergency

When trouble arises

If the tire inflation pressure is 130 kPa (1.3 kgf/cm

or bar, 19 psi)

or higher, but less than the specified air pressure: Proceed to .

If the tire inflation pressure is the specified air pressure (P. 483):

Proceed to .

Turn the compressor switch on to inflate the tire until the specified

air pressure is reached. Drive for about 5 km (3 miles) and then

perform .

Store the compressor in the luggage compartment.

Taking precautions to avoid sudden braking, sudden acceleration

and sharp turns, drive carefully at under 80 km/h (50 mph) to the

nearest authorized Toyota dealer or repairer, or another duly quali-

fied and equipped professional for tire repair or replacement.

 If the tire is inflated to more than the specified air pressure

Check that the air pressure indicator shows the specified air pressure.

If the air pressure is under the designated pressure, turn the compressor

switch on again and repeat the inflation procedure until the specified air

pressure is reached.

 The valve of a tire that has been repaired

After a tire is repaired with the emergency tire puncture repair kit, the valve

should be replaced.

Press the button to let some air out.