Operation Manual

463

8-2. Steps to take in an emergency

When trouble arises

Reinstall the cover, and then hook the rubber strip’s groove onto the

cover.

Start the engine. (P. 182, 185)

If the engine does not start after the above steps have been performed,

wait for 10 seconds and then try steps 3 and 5 again. If the engine still

does not start, contact any authorized Toyota dealer or repairer, or another

duly qualified and equipped professional.

After starting the engine, depress the accelerator pedal lightly until the

engine runs smoothly.

 Left-hand drive vehicles  Right-hand drive vehicles

NOTICE

 When restarting the engine

 Do not crank the engine before refueling and operating the priming pump.

This may damage the engine and fuel system.

 Vehicles without a smart entry & start system: Do not crank the engine for

more than 30 seconds at a time. This may overheat the starter and wiring

system.